Update corneish_zen.conf

config/corneish_zen.conf

@@ -3,3 +3,116 @@ CONFIG_ZMK_IDLE_SLEEP_TIMEOUT=3600000
 
 # Turn on logging, and set ZMK logging to debug output
 # CONFIG_ZMK_USB_LOGGING=n
+#
+# Copyright (c) 2022 Darryl deHaan
+# SPDX-License-Identifier: MIT
+#
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+#CONFIG_BOARD_CORNEISH_ZEN_V2_LEFT=y
+CONFIG_ZMK_SLEEP=y
+
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable pinctrl
+CONFIG_PINCTRL=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+# Enable SPI
+CONFIG_SPI_NRFX=y
+
+# Enable writing to flash
+CONFIG_USE_DT_CODE_PARTITION=y
+CONFIG_BUILD_OUTPUT_UF2=y
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+
+# Enable 32kHz crystal
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM=y
+
+CONFIG_ZMK_USB=y
+CONFIG_ZMK_BLE=y
+
+# enable display drivers
+CONFIG_ZMK_DISPLAY=y
+
+
+
+CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
+CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=2048
+CONFIG_LV_Z_BITS_PER_PIXEL=1
+CONFIG_LV_COLOR_DEPTH_1=y
+CONFIG_LV_DPI_DEF=145
+CONFIG_LV_Z_VDB_SIZE=100
+CONFIG_LV_USE_THEME_MONO=y
+CONFIG_LV_COLOR_CHROMA_KEY_HEX=0x00FF00
+CONFIG_ZMK_LV_FONT_DEFAULT_SMALL_MONTSERRAT_16=y
+CONFIG_LV_FONT_MONTSERRAT_26=y
+CONFIG_LV_FONT_DEFAULT_MONTSERRAT_26=y
+
+# custom status screens
+CONFIG_ZMK_DISPLAY_STATUS_SCREEN_CUSTOM=y
+CONFIG_ZMK_DISPLAY_STATUS_SCREEN_BUILT_IN=n
+CONFIG_CUSTOM_WIDGET_BATTERY_STATUS=y
+CONFIG_ZMK_WIDGET_BATTERY_STATUS=n
+CONFIG_CUSTOM_WIDGET_OUTPUT_STATUS=y
+CONFIG_ZMK_WIDGET_OUTPUT_STATUS=n
+CONFIG_CUSTOM_WIDGET_LAYER_STATUS=y
+CONFIG_ZMK_WIDGET_LAYER_STATUS=n
+
+# Turn on logging, and set ZMK logging to debug output
+#CONFIG_LOG=y
+#CONFIG_ZMK_USB_LOGGING=y
+#CONFIG_ZMK_LOG_LEVEL_DBG=y
+#CONFIG_LOG_BUFFER_SIZE=65536
+#CONFIG_LOG_STRDUP_BUF_COUNT=160
+#CONFIG_I2C_LOG_LEVEL_DBG=y
+#CONFIG_SPI_LOG_LEVEL_DBG=y
+#CONFIG_DISPLAY_LOG_LEVEL_DBG=y
+#CONFIG_LVGL_LOG_LEVEL_DBG=y
+#CONFIG_LVGL_USE_DEBUG=y
+#CONFIG_SENSOR_LOG_LEVEL_DBG=y
+
+
+CONFIG_WS2812_STRIP=y
+CONFIG_ZMK_RGB_UNDERGLOW=y
+CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y
+CONFIG_ZMK_RGB_UNDERGLOW_ON_START=n
+CONFIG_ZMK_RGB_UNDERGLOW_BRT_MAX=80
+
+CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=n
+CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_USB=n
+
+CONFIG_ZMK_RGB_UNDERGLOW_HUE_START=160
+CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=3
+
+#power config
+CONFIG_ZMK_IDLE_TIMEOUT=30000
+CONFIG_ZMK_SLEEP=y
+#CONFIG_ZMK_IDLE_SLEEP_TIMEOUT=900000
+
+#EXT POWER
+CONFIG_ZMK_EXT_POWER=y
+
+#BLE-passkey
+CONFIG_ZMK_BLE_PASSKEY_ENTRY=n
+
+#BLE-clean
+CONFIG_ZMK_BLE_CLEAR_BONDS_ON_START=n
+
+#usb-name
+CONFIG_USB_DEVICE_MANUFACTURER="corne_epd"
+
+CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
+CONFIG_ZMK_HID_REPORT_TYPE_NKRO=n
+#CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y