x86/entry: Fix register corruption in compat syscall

A panic was reported in the init process on AMD:

  Run /sbin/init as init process
  init[1]: segfault at f7fd5ca0 ip 00000000f7f5bbc7 sp 00000000ffa06aa0 error 7 in libc.so[f7f51000+4e000]
  Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 1 PID: 1 Comm: init Tainted: G        W         5.18.0-rc7-next-20220519 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x57/0x7d
   panic+0x10f/0x28d
   do_exit.cold+0x18/0x48
   do_group_exit+0x2e/0xb0
   get_signal+0xb6d/0xb80
   arch_do_signal_or_restart+0x31/0x760
   ? show_opcodes.cold+0x1c/0x21
   ? force_sig_fault+0x49/0x70
   exit_to_user_mode_prepare+0x131/0x1a0
   irqentry_exit_to_user_mode+0x5/0x30
   asm_exc_page_fault+0x27/0x30
  RIP: 0023:0xf7f5bbc7
  Code: 8a 44 24 10 88 41 ff 8b 44 24 10 83 c4 2c 5b 5e 5f 5d c3 53 83 ec 08 8b 5c 24 10 81 fb 00 f0 ff ff 76 0c e8 ba dc ff ff f7 db <89> 18 83 cb ff 83 c4 08 89 d8 5b c3 e8 81 60 ff ff 05 28 84 07 00
  RSP: 002b:00000000ffa06aa0 EFLAGS: 00000217
  RAX: 00000000f7fd5ca0 RBX: 000000000000000c RCX: 0000000000001000
  RDX: 0000000000000001 RSI: 00000000f7fd5b60 RDI: 00000000f7fd5b60
  RBP: 00000000f7fd1c1c R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
  R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
   </TASK>

The task's CX register got corrupted by commit 8c42819 ("x86/entry:
Use PUSH_AND_CLEAR_REGS for compat"), which overlooked the fact that
compat SYSCALL apparently stores the user's CX value in BP.

Before that commit, CX was saved from its stashed value in BP:

	pushq   %rbp                    /* pt_regs->cx (stashed in bp) */

But then it got changed to:

	pushq	%rcx			/* pt_regs->cx */

So the wrong value got saved and later restored back to the user.  Fix
it by pushing the correct value again (BP) for regs->cx.

Fixes: 8c42819 ("x86/entry: Use PUSH_AND_CLEAR_REGS for compat")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/b5a26592c9dd60bbacdf97974a7433fd802a5593.1652985970.git.jpoimboe@kernel.org

arch/x86/entry/calling.h

@@ -63,7 +63,7 @@ For 32-bit we have the following conventions - kernel is built with
  * for assembly code:
  */
 
-.macro PUSH_REGS rdx=%rdx rax=%rax save_ret=0
+.macro PUSH_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0
 	.if \save_ret
 	pushq	%rsi		/* pt_regs->si */
 	movq	8(%rsp), %rsi	/* temporarily store the return address in %rsi */
@@ -73,7 +73,7 @@ For 32-bit we have the following conventions - kernel is built with
 	pushq   %rsi		/* pt_regs->si */
 	.endif
 	pushq	\rdx		/* pt_regs->dx */
-	pushq   %rcx		/* pt_regs->cx */
+	pushq   \rcx		/* pt_regs->cx */
 	pushq   \rax		/* pt_regs->ax */
 	pushq   %r8		/* pt_regs->r8 */
 	pushq   %r9		/* pt_regs->r9 */
@@ -115,8 +115,8 @@ For 32-bit we have the following conventions - kernel is built with
 
 .endm
 
-.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax save_ret=0
-	PUSH_REGS rdx=\rdx, rax=\rax, save_ret=\save_ret
+.macro PUSH_AND_CLEAR_REGS rdx=%rdx rcx=%rcx rax=%rax save_ret=0
+	PUSH_REGS rdx=\rdx, rcx=\rcx, rax=\rax, save_ret=\save_ret
 	CLEAR_REGS
 .endm
 

arch/x86/entry/entry_64_compat.S

@@ -200,7 +200,7 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_safe_stack, SYM_L_GLOBAL)
 SYM_INNER_LABEL(entry_SYSCALL_compat_after_hwframe, SYM_L_GLOBAL)
 	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
-	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
+	PUSH_AND_CLEAR_REGS rcx=%rbp rax=$-ENOSYS
 	UNWIND_HINT_REGS
 
 	movq	%rsp, %rdi