Fix used Chinese punctuation, spaces in the English contents. (#227)

* Fix used Chinese punctuation, spaces in the English contents.

* Update 02-how-to-subscribe.md

* Update 04-release.md

.autocorrectignore

@@ -0,0 +1 @@
+versioned_docs/

community/02-how-to-subscribe.md

@@ -24,20 +24,20 @@ As long as you subscribe to this mailing list, you can get the latest developmen
 ## 1. Subscribe to the mailing list
 **For example,Take subscribing to the dev@eventmesh.apache.org mailing list**
 
-The steps are as follows：
- 1. Send an email without any content or subject:  `dev-subscribe@eventmesh.apache.org`
- 2. Wait until you receive an email with the subject line `confirm subscribe to dev@eventmesh.apache.org` (if you have not received it for a long time, please confirm whether the email is blocked by your email, if you have not been blocked and will receive a reply for a long time, return to step 1)
+The steps are as follows:
+ 1. Send an email without any content or subject:  `dev-subscribe@eventmesh.apache.org`.
+ 2. Wait until you receive an email with the subject line `confirm subscribe to dev@eventmesh.apache.org` (if you have not received it for a long time, please confirm whether the email is blocked by your email, if you have not been blocked and will receive a reply for a long time, return to step 1).
  3. Reply directly to the email without changing the subject line or adding the email content.
- 4. Wait until you receive an email with the subject line `WELCOME to dev@eventmesh.apache.org` .
+ 4. Wait until you receive an email with the subject line `WELCOME to dev@eventmesh.apache.org`.
  5. If you receive an email from (4), you have successfully subscribed to the email. To initiate a discussion, you can send an email directly to `dev@eventmesh.apache.org`, which will be sent to everyone who subscribed to the mailing list.
 
 ## 2. Unsubscribe from the mailing list
-The steps for unsubscribing to a mailing list are similar to those for subscribing to a mailing list:：
-1. Send an email without any content or subject to: `dev-unsubscribe@eventmesh.apache.org`
-2. Wait until you receive an email with the subject line `confirm unsubscribe from dev@eventmesh.apache.org` 
-3. Reply directly to the email without changing the subject line or adding the email content
-4. Wait until you receive an email with the subject line `GOODBYE from dev@eventmesh.apache.org`
-5. Unsubscribe success
+The steps for unsubscribing to a mailing list are similar to those for subscribing to a mailing list:
+1. Send an email without any content or subject to: `dev-unsubscribe@eventmesh.apache.org`.
+2. Wait until you receive an email with the subject line `confirm unsubscribe from dev@eventmesh.apache.org`.
+3. Reply directly to the email without changing the subject line or adding the email content.
+4. Wait until you receive an email with the subject line `GOODBYE from dev@eventmesh.apache.org`.
+5. Unsubscribe success.
 
 
 ## 3. Issues related
@@ -51,4 +51,4 @@ For existing issues, if you are interested, you can reply and discuss as much as
 
 ## 4. Mail usage 
 
-Please refer to [How to use the mailing list](03-how-to-use-email.md) for email specifications and tips
+Please refer to [How to use the mailing list](03-how-to-use-email.md) for email specifications and tips.

community/04-release.md

@@ -31,7 +31,7 @@ $ gpg --version #Check the version, it should be 2.x
 
 According to the prompt, generate the key
 
-> Note：please use Apache mail box generate GPG Key
+> Note: please use Apache mail box generate GPG Key
 
 ```shell
 $ gpg --full-gen-key
@@ -94,7 +94,7 @@ $ gpg --keyserver hkp://keyserver.ubuntu.com --recv-keys 579C25F5 # Verify wheth
 default-key 28681CB1
 ```
 
-**If there are multiple public keys, useless keys can also be deleted：**
+**If there are multiple public keys, useless keys can also be deleted:**
 
 ```shell
 $ gpg --delete-secret-keys 29BBC3CB # first delete the private key and specify the key id
@@ -250,7 +250,7 @@ Execute the following command, you need to sign and encrypt files such as jar, s
 $ gradle signMavenJavaPublication publish
 ```
 
-After the above command is executed successfully, the version to be released will be automatically uploaded to Apache's staging repository. All Artifacts that are deployed to the remote [maven repository](http://repository.apache.org/) will be in the staging state，visit https://repository.apache.org/#stagingRepositories ,log in with Apache's LDAP account, You will see the uploaded version, and the content of the `Repository` column is ${STAGING.REPOSITORY}. Click `Close` to tell Nexus that the build is complete and only then will the build be usable. If there is a problem with the electronic signature, `Close` will fail, and you can view the failure information through `Activity`.
+After the above command is executed successfully, the version to be released will be automatically uploaded to Apache's staging repository. All Artifacts that are deployed to the remote [maven repository](http://repository.apache.org/) will be in the staging state, visit https://repository.apache.org/#stagingRepositories ,log in with Apache's LDAP account, You will see the uploaded version, and the content of the `Repository` column is ${STAGING.REPOSITORY}. Click `Close` to tell Nexus that the build is complete and only then will the build be usable. If there is a problem with the electronic signature, `Close` will fail, and you can view the failure information through `Activity`.
 
 
 
@@ -604,7 +604,7 @@ https://eventmesh.apache.org/download/
 
 https://eventmesh.apache.org/zh/download/
 
-Download links for GPG signature files and hash verification files should use this prefix：`https://downloads.apache.org/eventmesh/`
+Download links for GPG signature files and hash verification files should use this prefix: `https://downloads.apache.org/eventmesh/`
 
 > Note: The project download link should use https://www.apache.org/dyn/closer.lua instead of closer.cgi or mirrors.cgi
 

community/05-how-to-vote-a-committer-pmc.md

@@ -243,7 +243,7 @@ After receiving the notification email that the account was created successfully
 
 - Enter [Apache Account Utility Platform] (https://id.apache.org/), create a password, set up a personal email address (`forwarding email address`) and a GitHub account (`Your GitHub Username`).
 - If you want to use `xxx@apache.org` mail service, please refer to [here](https://infra.apache.org/committer-email.html). Gmail is recommended as this forwarding mode is not easily found in most email service setups.
-- Follow【Authorize GitHub 2FA wiki】(https://help.github.com/articles/configuring-two-factor-authentication-via-a-totp-mobile-app/) to enable two-factor authorization (2FA) in [Github ](http://github.com/). When you set 2FA to "off", it will be delisted from the corresponding Apache committer write permission group until you set it again. (**Note: pay attention to recovery codes like passwords!**)
+- Follow [Authorize GitHub 2FA wiki](https://help.github.com/articles/configuring-two-factor-authentication-via-a-totp-mobile-app/) to enable two-factor authorization (2FA) in [Github ](http://github.com/). When you set 2FA to "off", it will be delisted from the corresponding Apache committer write permission group until you set it again. (**Note: pay attention to recovery codes like passwords!**)
 - Use the [GitBox Account Linking Utility] (https://gitbox.apache.org/setup/) to obtain the write permission of the EventMesh project.
 - [eventmesh-website](https://eventmesh.apache.org/team) related page update
 

docs/design-document/03-connect/02-http-connector.md

@@ -159,7 +159,7 @@ The data format of the message sent by the HTTP sink connector is as follows:
 - time: the time the request was sent
 - uuid: request unique identifier, one-to-one with the uuid of the callback data structure in webhook mode
 - eventId: event ID, composed of type and offset
-- data：actual data to be sent
+- data: actual data to be sent
 
 ```json
 {

docs/design-document/03-connect/10-file-connector.md

@@ -1,10 +1,10 @@
 # File
 
-## FileSinkConnector：Writes File file from EventMesh
+## FileSinkConnector: Writes File file from EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `sink-config.yml`.
-3. Started FileConnectServer，It will subscribe to the topic defined in `pubSubConfig.subject` in the EventMesh Runtime，And write the data to the path located : `connectorConfig.topic`/Year/Month/Day ; the file named:【 `connectorConfig.topic` + Current time Hour (24 hours) + timestamp 】.
+3. Started FileConnectServer, It will subscribe to the topic defined in `pubSubConfig.subject` in the EventMesh Runtime, And write the data to the path located : `connectorConfig.topic`/Year/Month/Day ; the file named:【 `connectorConfig.topic` + Current time Hour (24 hours) + timestamp 】.
 4. Using the Topic specified in `pubSubConfig.subject`, send a message to EventMesh, which you will persist in the file.
 
 ```yaml
@@ -24,11 +24,11 @@ connectorConfig:
     topic: TopicTest
 ```
 
-## FileSourceConnector：Read from File to EventMesh
+## FileSourceConnector: Read from File to EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `source-config.yml`.
-3. Started FileConnectServer，It sends the data read from `connectorConfig.filePath` to `pubSubConfig.subject` in the EventMesh Runtime.
+3. Started FileConnectServer, It sends the data read from `connectorConfig.filePath` to `pubSubConfig.subject` in the EventMesh Runtime.
 4. The append to the file content is recognized, and you receive the message in EventMesh.
 
 ```yaml

docs/design-document/03-connect/11-kafka-connector.md

@@ -1,6 +1,6 @@
 # Kafka
 
-## KafkaSinkConnector：From EventMesh to Kafka
+## KafkaSinkConnector: From EventMesh to Kafka
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `sink-config.yml`.
@@ -27,7 +27,7 @@ connectorConfig:
   valueConverter: org.apache.kafka.common.serialization.StringSerializer
 ```
 
-## KafkaSourceConnector：From Kafka to EventMesh
+## KafkaSourceConnector: From Kafka to EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sourceConnector and check `source-config.yml`.