Merge branch 'master' into add-ch-lint

.autocorrectignore

@@ -0,0 +1,2 @@
+versioned_docs/
+version-*/

.autocorrectrc

@@ -0,0 +1,4 @@
+rules:
+  space-bracket: 0
+context:
+  codeblock: 0

README.md

@@ -34,7 +34,7 @@ npm run serve
 Before you commit your changes, you can check the style of the contents by running the following command:
 
 ```sh
-$ yarn autocorrect --lint
+$ npm run autocorrect --lint
 ```
 
 And then follow the instructions to fix the style issues.

community/02-how-to-subscribe.md

@@ -24,20 +24,20 @@ As long as you subscribe to this mailing list, you can get the latest developmen
 ## 1. Subscribe to the mailing list
 **For example,Take subscribing to the dev@eventmesh.apache.org mailing list**
 
-The steps are as follows：
- 1. Send an email without any content or subject:  `dev-subscribe@eventmesh.apache.org`
- 2. Wait until you receive an email with the subject line `confirm subscribe to dev@eventmesh.apache.org` (if you have not received it for a long time, please confirm whether the email is blocked by your email, if you have not been blocked and will receive a reply for a long time, return to step 1)
+The steps are as follows:
+ 1. Send an email without any content or subject:  `dev-subscribe@eventmesh.apache.org`.
+ 2. Wait until you receive an email with the subject line `confirm subscribe to dev@eventmesh.apache.org` (if you have not received it for a long time, please confirm whether the email is blocked by your email, if you have not been blocked and will receive a reply for a long time, return to step 1).
  3. Reply directly to the email without changing the subject line or adding the email content.
- 4. Wait until you receive an email with the subject line `WELCOME to dev@eventmesh.apache.org` .
+ 4. Wait until you receive an email with the subject line `WELCOME to dev@eventmesh.apache.org`.
  5. If you receive an email from (4), you have successfully subscribed to the email. To initiate a discussion, you can send an email directly to `dev@eventmesh.apache.org`, which will be sent to everyone who subscribed to the mailing list.
 
 ## 2. Unsubscribe from the mailing list
-The steps for unsubscribing to a mailing list are similar to those for subscribing to a mailing list:：
-1. Send an email without any content or subject to: `dev-unsubscribe@eventmesh.apache.org`
-2. Wait until you receive an email with the subject line `confirm unsubscribe from dev@eventmesh.apache.org` 
-3. Reply directly to the email without changing the subject line or adding the email content
-4. Wait until you receive an email with the subject line `GOODBYE from dev@eventmesh.apache.org`
-5. Unsubscribe success
+The steps for unsubscribing to a mailing list are similar to those for subscribing to a mailing list:
+1. Send an email without any content or subject to: `dev-unsubscribe@eventmesh.apache.org`.
+2. Wait until you receive an email with the subject line `confirm unsubscribe from dev@eventmesh.apache.org`.
+3. Reply directly to the email without changing the subject line or adding the email content.
+4. Wait until you receive an email with the subject line `GOODBYE from dev@eventmesh.apache.org`.
+5. Unsubscribe success.
 
 
 ## 3. Issues related
@@ -51,4 +51,4 @@ For existing issues, if you are interested, you can reply and discuss as much as
 
 ## 4. Mail usage 
 
-Please refer to [How to use the mailing list](03-how-to-use-email.md) for email specifications and tips
+Please refer to [How to use the mailing list](03-how-to-use-email.md) for email specifications and tips.

community/04-release.md

@@ -31,7 +31,7 @@ $ gpg --version #Check the version, it should be 2.x
 
 According to the prompt, generate the key
 
-> Note：please use Apache mail box generate GPG Key
+> Note: please use Apache mail box generate GPG Key
 
 ```shell
 $ gpg --full-gen-key
@@ -94,7 +94,7 @@ $ gpg --keyserver hkp://keyserver.ubuntu.com --recv-keys 579C25F5 # Verify wheth
 default-key 28681CB1
 ```
 
-**If there are multiple public keys, useless keys can also be deleted：**
+**If there are multiple public keys, useless keys can also be deleted:**
 
 ```shell
 $ gpg --delete-secret-keys 29BBC3CB # first delete the private key and specify the key id
@@ -250,7 +250,7 @@ Execute the following command, you need to sign and encrypt files such as jar, s
 $ gradle signMavenJavaPublication publish
 ```
 
-After the above command is executed successfully, the version to be released will be automatically uploaded to Apache's staging repository. All Artifacts that are deployed to the remote [maven repository](http://repository.apache.org/) will be in the staging state，visit https://repository.apache.org/#stagingRepositories ,log in with Apache's LDAP account, You will see the uploaded version, and the content of the `Repository` column is ${STAGING.REPOSITORY}. Click `Close` to tell Nexus that the build is complete and only then will the build be usable. If there is a problem with the electronic signature, `Close` will fail, and you can view the failure information through `Activity`.
+After the above command is executed successfully, the version to be released will be automatically uploaded to Apache's staging repository. All Artifacts that are deployed to the remote [maven repository](http://repository.apache.org/) will be in the staging state, visit https://repository.apache.org/#stagingRepositories ,log in with Apache's LDAP account, You will see the uploaded version, and the content of the `Repository` column is ${STAGING.REPOSITORY}. Click `Close` to tell Nexus that the build is complete and only then will the build be usable. If there is a problem with the electronic signature, `Close` will fail, and you can view the failure information through `Activity`.
 
 
 
@@ -604,7 +604,7 @@ https://eventmesh.apache.org/download/
 
 https://eventmesh.apache.org/zh/download/
 
-Download links for GPG signature files and hash verification files should use this prefix：`https://downloads.apache.org/eventmesh/`
+Download links for GPG signature files and hash verification files should use this prefix: `https://downloads.apache.org/eventmesh/`
 
 > Note: The project download link should use https://www.apache.org/dyn/closer.lua instead of closer.cgi or mirrors.cgi
 

community/05-how-to-vote-a-committer-pmc.md

@@ -243,7 +243,7 @@ After receiving the notification email that the account was created successfully
 
 - Enter [Apache Account Utility Platform] (https://id.apache.org/), create a password, set up a personal email address (`forwarding email address`) and a GitHub account (`Your GitHub Username`).
 - If you want to use `xxx@apache.org` mail service, please refer to [here](https://infra.apache.org/committer-email.html). Gmail is recommended as this forwarding mode is not easily found in most email service setups.
-- Follow【Authorize GitHub 2FA wiki】(https://help.github.com/articles/configuring-two-factor-authentication-via-a-totp-mobile-app/) to enable two-factor authorization (2FA) in [Github ](http://github.com/). When you set 2FA to "off", it will be delisted from the corresponding Apache committer write permission group until you set it again. (**Note: pay attention to recovery codes like passwords!**)
+- Follow [Authorize GitHub 2FA wiki](https://help.github.com/articles/configuring-two-factor-authentication-via-a-totp-mobile-app/) to enable two-factor authorization (2FA) in [Github ](http://github.com/). When you set 2FA to "off", it will be delisted from the corresponding Apache committer write permission group until you set it again. (**Note: pay attention to recovery codes like passwords!**)
 - Use the [GitBox Account Linking Utility] (https://gitbox.apache.org/setup/) to obtain the write permission of the EventMesh project.
 - [eventmesh-website](https://eventmesh.apache.org/team) related page update
 

docs/design-document/03-connect/02-http-connector.md

@@ -159,7 +159,7 @@ The data format of the message sent by the HTTP sink connector is as follows:
 - time: the time the request was sent
 - uuid: request unique identifier, one-to-one with the uuid of the callback data structure in webhook mode
 - eventId: event ID, composed of type and offset
-- data：actual data to be sent
+- data: actual data to be sent
 
 ```json
 {

docs/design-document/03-connect/10-file-connector.md

@@ -1,10 +1,10 @@
 # File
 
-## FileSinkConnector：Writes File file from EventMesh
+## FileSinkConnector: Writes File file from EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `sink-config.yml`.
-3. Started FileConnectServer，It will subscribe to the topic defined in `pubSubConfig.subject` in the EventMesh Runtime，And write the data to the path located : `connectorConfig.topic`/Year/Month/Day ; the file named:【 `connectorConfig.topic` + Current time Hour (24 hours) + timestamp 】.
+3. Started FileConnectServer, It will subscribe to the topic defined in `pubSubConfig.subject` in the EventMesh Runtime, And write the data to the path located : `connectorConfig.topic`/Year/Month/Day ; the file named:【 `connectorConfig.topic` + Current time Hour (24 hours) + timestamp 】.
 4. Using the Topic specified in `pubSubConfig.subject`, send a message to EventMesh, which you will persist in the file.
 
 ```yaml
@@ -24,11 +24,11 @@ connectorConfig:
     topic: TopicTest
 ```
 
-## FileSourceConnector：Read from File to EventMesh
+## FileSourceConnector: Read from File to EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `source-config.yml`.
-3. Started FileConnectServer，It sends the data read from `connectorConfig.filePath` to `pubSubConfig.subject` in the EventMesh Runtime.
+3. Started FileConnectServer, It sends the data read from `connectorConfig.filePath` to `pubSubConfig.subject` in the EventMesh Runtime.
 4. The append to the file content is recognized, and you receive the message in EventMesh.
 
 ```yaml

docs/design-document/03-connect/11-kafka-connector.md

@@ -1,6 +1,6 @@
 # Kafka
 
-## KafkaSinkConnector：From EventMesh to Kafka
+## KafkaSinkConnector: From EventMesh to Kafka
 
 1. Start your EventMesh Runtime.
 2. Enable sinkConnector and check `sink-config.yml`.
@@ -27,7 +27,7 @@ connectorConfig:
   valueConverter: org.apache.kafka.common.serialization.StringSerializer
 ```
 
-## KafkaSourceConnector：From Kafka to EventMesh
+## KafkaSourceConnector: From Kafka to EventMesh
 
 1. Start your EventMesh Runtime.
 2. Enable sourceConnector and check `source-config.yml`.

i18n/zh/docusaurus-plugin-content-blog/meetup-content-review.md

@@ -2,4 +2,4 @@
 
 |**Data**|**Topic & Videos**|
 |:----|:----|
-|17/05/2022|[解决SaaS组合式应用集成标准化问题--EventMesh在华为的实践应用](https://www.bilibili.com/video/BV1cA4y1d7uw/?vd_source=7fa3cce048d504c8a511cfe78a2ec8c5)|
+|17/05/2022|[解决 SaaS 组合式应用集成标准化问题--EventMesh 在华为的实践应用](https://www.bilibili.com/video/BV1cA4y1d7uw/?vd_source=7fa3cce048d504c8a511cfe78a2ec8c5)|

i18n/zh/docusaurus-plugin-content-docs-community/current/02-how-to-subscribe.md

@@ -9,16 +9,16 @@ Apache 为每个项目配置了一系列邮件列表。邮件列表是 Apache 
 
 社区日常运维中的很多事情都是通过邮件列表来承载的，比如技术讨论、任何想法或建议、项目问答、新功能/特性/重大变更的决定和通知、版本发布投票等。只要是和项目相关的，都可以在这里发起讨论。
 
-只要订阅这个邮件列表，就可以第一时间了解EventMesh社区的最新动态，与社区保持同步。
+只要订阅这个邮件列表，就可以第一时间了解 EventMesh 社区的最新动态，与社区保持同步。
 
-**EventMesh项目邮件列表**
+**EventMesh 项目邮件列表**
 
-|名称|描述|订阅邮件|退订邮件|邮件归档|
+|名称 | 描述 | 订阅邮件 | 退订邮件 | 邮件归档|
 |:-----|:--------|:------|:-------|:-----|
-| [users@eventmesh.apache.org](mailto:users@eventmesh.apache.org)|用户讨论| [订阅](mailto:users-subscribe@eventmesh.apache.org)| [退订](mailto:users-unsubscribe@eventmesh.apache.org)| [归档](https://lists.apache.org/list.html?users@eventmesh.apache.org)|
+| [users@eventmesh.apache.org](mailto:users@eventmesh.apache.org)|用户讨论 | [订阅](mailto:users-subscribe@eventmesh.apache.org)| [退订](mailto:users-unsubscribe@eventmesh.apache.org)| [归档](https://lists.apache.org/list.html?users@eventmesh.apache.org)|
 | [dev@eventmesh.apache.org](mailto:dev@eventmesh.apache.org) | 社区活动信息 | [订阅](mailto:dev-subscribe@eventmesh.apache.org) | [退订](mailto:dev-unsubscribe@eventmesh.apache.org) | [归档](https://lists.apache.org/list.html?dev@eventmesh.apache.org) |
 | [commits@eventmesh.apache.org](mailto:commits@eventmesh.apache.org) | 代码库更新信息 | [订阅](mailto:commits-subscribe@eventmesh.apache.org) | [退订](mailto:commits-unsubscribe@eventmesh.apache.org) | [归档](https://lists.apache.org/list.html?commits@eventmesh.apache.org) |
-| [issues@eventmesh.apache.org](mailto:issues@eventmesh.apache.org) | 问题或PR的评论和审查 | [订阅](mailto:issues-subscribe@eventmesh.apache.org) | [退订](mailto:issues-unsubscribe@eventmesh.apache.org) | [归档](https://lists.apache.org/list.html?issues@eventmesh.apache.org) |
+| [issues@eventmesh.apache.org](mailto:issues@eventmesh.apache.org) | 问题或 PR 的评论和审查 | [订阅](mailto:issues-subscribe@eventmesh.apache.org) | [退订](mailto:issues-unsubscribe@eventmesh.apache.org) | [归档](https://lists.apache.org/list.html?issues@eventmesh.apache.org) |
 
 ## 1. 订阅邮件列表
 
@@ -27,7 +27,7 @@ Apache 为每个项目配置了一系列邮件列表。邮件列表是 Apache 
 步骤如下：
 
 1. 发送一封没有任何内容和主题的邮件：`dev-subscribe@eventmesh.apache.org`
-2. 等到收到一封主题为`确认订阅dev@eventmesh.apache.org`的邮件（如果长时间没有收到，请确认邮件是否被您的邮箱屏蔽，如果有未被屏蔽，长时间会收到回复，返回步骤1）
+2. 等到收到一封主题为`确认订阅dev@eventmesh.apache.org`的邮件（如果长时间没有收到，请确认邮件是否被您的邮箱屏蔽，如果有未被屏蔽，长时间会收到回复，返回步骤 1）
 3. 直接回复电子邮件，不更改主题行或添加电子邮件内容。
 4. 等到您收到一封主题为“WELCOME to dev@eventmesh.apache.org”的电子邮件。
 5. 如果您收到来自（4）的邮件，则您已成功订阅该邮件。要发起讨论，您可以直接发送电子邮件至 `dev@eventmesh.apache.org`，这将发送给订阅邮件列表的每个人。
@@ -43,11 +43,11 @@ Apache 为每个项目配置了一系列邮件列表。邮件列表是 Apache 
 
 ## 3. 相关问题
 
-> EventMesh的issues地址[https://github.com/apache/eventmesh/issues](https://github.com/apache/eventmesh/issues)
+> EventMesh 的 issues 地址[https://github.com/apache/eventmesh/issues](https://github.com/apache/eventmesh/issues)
 
-对于新的问题/想法，您可以通过\[new issues\]创建一个新的issue，并尽可能详细地描述issue，以便社区成员跟进、讨论和解决。对于项目的任何问题，建议先创建issue进行记录和跟进，这样整个过程可以很好的保存和归档，方便后续用户检索。
+对于新的问题/想法，您可以通过\[new issues\]创建一个新的 issue，并尽可能详细地描述 issue，以便社区成员跟进、讨论和解决。对于项目的任何问题，建议先创建 issue 进行记录和跟进，这样整个过程可以很好的保存和归档，方便后续用户检索。
 
-对于存在的问题，如果大家有兴趣，可以回复讨论，不限。对于任务/BUG类型的问题，有兴趣的可以关注或直接参与任务。非常欢迎社区伙伴为 EventMesh 贡献自己的力量。
+对于存在的问题，如果大家有兴趣，可以回复讨论，不限。对于任务/BUG 类型的问题，有兴趣的可以关注或直接参与任务。非常欢迎社区伙伴为 EventMesh 贡献自己的力量。
 
 
 ## 4.邮件使用

i18n/zh/docusaurus-plugin-content-docs-community/current/03-how-to-use-email.md

@@ -9,7 +9,7 @@ sidebar_position: 1
 
 > 当成为 Committer 后，你就会拥有一个 Apache 邮箱，本教程基于 `Gmail` 使用 Apache 邮箱。
 
-#### 1. 登录Gmail
+#### 1. 登录 Gmail
 
 * [Gmail's official website](https://gmail.google.com) 在这里
 
@@ -37,12 +37,12 @@ Your ApacheID is: xxxx
 
 #### 5. 添加 Apache 邮箱
 
-* 登录到 [id.apache.org](https://id.apache.org/), 配置你的apache邮箱转发地址
+* 登录到 [id.apache.org](https://id.apache.org/), 配置你的 apache 邮箱转发地址
 
 ![forwarding-email](/images/email/forwarding-email.png)
 
-* 添加apache邮箱至Gmail配置
+* 添加 apache 邮箱至 Gmail 配置
 
 ![add-apache-email](/images/email/add-apache-email.png)
 
-> 未配置前，默认使用Gmail邮箱发送，可以添加apache邮箱作为默认发送邮箱。这个过程需要相关的配置和邮箱来确认和验证。
+> 未配置前，默认使用 Gmail 邮箱发送，可以添加 apache 邮箱作为默认发送邮箱。这个过程需要相关的配置和邮箱来确认和验证。