nimble/phy/cmac: Move chip variant detection to core

Chip variant detection does not work properly in ble_rf_init since it
may be called when PD_SYS is disabled. We better do this in core on CMAC
startup as PD_SYS is always enabled at that time.

nimble/drivers/dialog_cmac/src/ble_rf.c

@@ -30,14 +30,6 @@
 #define RF_CALIBRATION_1 (0x02)
 #define RF_CALIBRATION_2 (0x04)
 
-enum chip_variant {
- CHIP_VARIANT_TSMC,
- CHIP_VARIANT_GF,
- CHIP_VARIANT_UNKNOWN
-};
-
-static int g_chip_variant;
-
 static const int8_t g_ble_rf_power_lvls[] = {
  -18, -12, -8, -6, -3, -2, -1, 0, 1, 2, 3, 4, 4, 5, 6
 };
@@ -122,21 +114,6 @@ set_reg16_mask(uint32_t addr, uint16_t mask, uint16_t val)
  *reg = (*reg & (~mask)) | (val & mask);
 }
 
-static inline int 
-read_chip_variant(void)
-{
- uint32_t chip_id1 = get_reg32_bits(0x50040200, 0xFF);
-
- switch (chip_id1) {
- case '2':
- return CHIP_VARIANT_TSMC;
- case '3':
- return CHIP_VARIANT_GF;
- default:
- return CHIP_VARIANT_UNKNOWN;
- }
-}
-
 static void
 delay_us(uint32_t delay_us)
 {
@@ -256,7 +233,7 @@ ble_rf_synth_is_enabled(void)
 static void
 ble_rf_synth_apply_recommended_settings(void)
 {
- if (g_chip_variant == CHIP_VARIANT_GF) {
+ if (mcu_chip_variant_get() == MCU_CHIP_VARIANT_GF) {
  set_reg32_mask(0x40022034, 0x00000018, 0x0215807B);
  }
  set_reg32_mask(0x40022048, 0x0000000c, 0x000000d5);
@@ -361,7 +338,7 @@ ble_rf_calibration_1(void)
  set_reg32(0x40020000, 0x0f168820);
  set_reg32_bits(0x40022000, 0x00000001, 0);
  set_reg32_bits(0x4002101c, 0x00001e00, 0);
- if (g_chip_variant == CHIP_VARIANT_TSMC) {
+ if (mcu_chip_variant_get() == MCU_CHIP_VARIANT_TSMC) {
  set_reg32_bits(0x4002001c, 0x0000003f, 47);
  } else {
  set_reg32_bits(0x4002001c, 0x0000003f, 44);
@@ -567,8 +544,7 @@ ble_rf_init(void)
  static bool done = false;
  uint32_t val;
 
- g_chip_variant = read_chip_variant();
- assert(g_chip_variant != CHIP_VARIANT_UNKNOWN);
+ assert(mcu_chip_variant_get());
 
  ble_rf_disable();