[WIP][DNM] Initial commit adding BASS in bttester

.gdb_out

@@ -0,0 +1,156 @@
+GNU gdb (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 12.1.90.20221210-git
+Copyright (C) 2022 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+Type "show copying" and "show warranty" for details.
+This GDB was configured as "--host=i686-w64-mingw32 --target=arm-none-eabi".
+Type "show configuration" for configuration details.
+For bug reporting instructions, please see:
+<https://bugs.linaro.org/>.
+Find the GDB manual and other documentation resources online at:
+ <http://www.gnu.org/software/gdb/documentation/>.
+
+For help, type "help".
+Type "apropos word" to search for commands related to "word".
+SEGGER J-Link GDB Server V7.96 Command Line Version
+
+JLinkARM.dll V7.96 (DLL compiled Mar 7 2024 16:49:04)
+
+Command line: -device nrf52840_xxaa -speed 1000 -if SWD -port 3333 -singlerun
+-----GDB Server start settings-----
+GDBInit file: none
+GDB Server Listening port: 3333
+SWO raw output listening port: 2332
+Terminal I/O port: 2333
+Accept remote connection: localhost only
+Generate logfile: off
+Verify download: off
+Init regs on start: off
+Silent mode: off
+Single run mode: on
+Target connection timeout: 0 ms
+------J-Link related settings------
+J-Link Host interface: USB
+J-Link script: none
+J-Link settings file: none
+------Target related settings------
+Target device: nrf52840_xxaa
+Target device parameters: none
+Target interface: SWD
+Target interface speed: 1000kHz
+Target endian: little
+
+Connecting to J-Link...
+J-Link is connected.
+Firmware: J-Link OB-SAM3U128-V2-NordicSemi compiled Oct 30 2023 12:12:17
+Hardware: V1.00
+S/N: 683403725
+Feature(s): RDI, FlashBP, FlashDL, JFlash, GDB
+Checking target voltage...
+Target voltage: 3.30 V
+Listening on TCP/IP port 3333
+Connecting to target...
+Halting core...
+Connected to target
+Waiting for GDB connection...Connected to 0000:0000:0000:0000:0000:0000:0000:0001
+GDB client (conn. 888) requested target.xml from GDB Server
+warning: No executable has been specified and target does not support
+determining executable automatically. Try using the "file" command.
+Reading common registers: Read register 'r0' (4 bytes) from hardware: 0xFF7F0000
+Read register 'r1' (4 bytes) from hardware: 0x01010600
+Read register 'r2' (4 bytes) from hardware: 0x00010600
+Read register 'r3' (4 bytes) from hardware: 0x00100140
+Read register 'r4' (4 bytes) from hardware: 0x80000000
+Read register 'r5' (4 bytes) from hardware: 0x80000000
+Read register 'r6' (4 bytes) from hardware: 0x00000000
+Read register 'r7' (4 bytes) from hardware: 0x01060000
+Read register 'r8' (4 bytes) from hardware: 0x00000000
+Read register 'r9' (4 bytes) from hardware: 0x40000000
+Read register 'r10' (4 bytes) from hardware: 0x00000000
+Read register 'r11' (4 bytes) from hardware: 0x00000000
+Read register 'r12' (4 bytes) from hardware: 0x00000000
+Read register 'sp' (4 bytes) from hardware: 0x00DA0020
+Read register 'lr' (4 bytes) from hardware: 0x19FE0400
+Read register 'pc' (4 bytes) from hardware: 0xA0FE0400
+Read register 'xpsr' (4 bytes) from hardware: 0x00000021
+Read 4 bytes @ address 0x0004FEA0 (Data = 0xBD38B954)
+Read 2 bytes @ address 0x0004FEA0 (Data = 0xB954)
+0x0004fea0 in ?? ()
+Received monitor command: reset
+Resetting target
+Resetting target
+Downloading 16000 bytes @ address 0x0000C000
+Downloading 15968 bytes @ address 0x0000FE80
+Downloading 16000 bytes @ address 0x00013CE0
+Downloading 16096 bytes @ address 0x00017B60
+Downloading 16048 bytes @ address 0x0001BA40
+Downloading 15824 bytes @ address 0x0001F8F0
+Downloading 16160 bytes @ address 0x000236C0
+Downloading 16064 bytes @ address 0x000275E0
+Downloading 16096 bytes @ address 0x0002B4A0
+Downloading 16048 bytes @ address 0x0002F380
+Downloading 16096 bytes @ address 0x00033230
+Downloading 16048 bytes @ address 0x00037110
+Downloading 16016 bytes @ address 0x0003AFC0
+Downloading 16016 bytes @ address 0x0003EE50
+Downloading 16064 bytes @ address 0x00042CE0
+Downloading 15936 bytes @ address 0x00046BA0
+Downloading 15952 bytes @ address 0x0004A9E0
+Downloading 16128 bytes @ address 0x0004E830
+Downloading 11416 bytes @ address 0x00052730
+Restoring binary file ..\..\bin\targets\bttester\app\@apache-mynewt-nimble\apps\bttester\bttester.img into memory (0xc000 to 0x553c8)
+Reading register 'msp' = 0x20040000
+Reading register 'psp' = 0x00000000
+Reading register 'primask' = 0x00000000
+Reading register 'basepri' = 0x00000000
+Reading register 'faultmask' = 0x00000000
+Reading register 'control' = 0x00000000
+Reading register 'apsr' = 0x00000000
+Reading register 'epsr' = 0x01000000
+Reading register 'ipsr' = 0x00000000
+Reading register 'iapsr' = 0x00000000
+Reading register 'eapsr' = 0x01000000
+Reading register 'iepsr' = 0x01000000
+Reading register 'fpscr' = 0x00000000
+r0 0x7fff 32767
+r1 0x60101 393473
+r2 0x60100 393472
+r3 0x40011000 1073811456
+r4 0x80 128
+r5 0x80 128
+r6 0x0 0
+r7 0x601 1537
+r8 0x0 0
+r9 0x40 64
+r10 0x0 0
+r11 0x0 0
+r12 0x0 0
+sp 0x2000da00 0x2000da00
+lr 0x4fe19 327193
+pc 0x4fea0 0x4fea0
+xpsr 0x21000000 553648128
+msp 0x20040000 0x20040000
+psp 0x0 0x0
+primask 0x0 0
+basepri 0x0 0
+faultmask 0x0 0
+control 0x0 0
+apsr 0x0 0
+epsr 0x1000000 16777216
+ipsr 0x0 0
+iapsr 0x0 0
+eapsr 0x1000000 16777216
+iepsr 0x1000000 16777216
+fpscr 0x0 0
+Received monitor command: reset
+Resetting target
+Resetting target
+GDB closed TCP/IP connection (Socket 888)
+A debugging session is active.
+
+ Inferior 1 [Remote target] will be killed.
+
+Quit anyway? (y or n) [answered Y; input not from terminal]
+Restoring target state and closing J-Link connection...
+Shutting down...

apps/bttester/pkg.yml

@@ -36,6 +36,7 @@ pkg.deps:
  - "@apache-mynewt-nimble/nimble/host/services/gap"
  - "@apache-mynewt-nimble/nimble/host/services/gatt"
  - "@apache-mynewt-nimble/nimble/host/services/dis"
+ - "@apache-mynewt-nimble/nimble/host/audio/services/bass"
  - "@apache-mynewt-nimble/nimble/host/store/config"
  - "@apache-mynewt-core/hw/drivers/uart"
  - "@apache-mynewt-core/hw/drivers/rtt"

apps/bttester/src/btp/btp.h

@@ -48,6 +48,7 @@
 #define BTP_SERVICE_ID_MESH 4
 #define BTP_SERVICE_ID_GATTC 6
 #define BTP_SERVICE_ID_BAP 14
+#define BTP_SERVICE_ID_BASS 14
 
 #define BTP_SERVICE_ID_MAX BTP_SERVICE_ID_BAP
 

apps/bttester/src/btp/btp_bass.h

@@ -0,0 +1,37 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+#ifndef H_BTP_BASS_
+#define H_BTP_BASS_
+
+#include "nimble/ble.h"
+#include <stdint.h>
+
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif
+
+/* BAS Service */
+/* commands */
+#define BTP_BASS_READ_SUPPORTED_COMMANDS 0x01
+struct btp_bass_read_supported_commands_rp {
+ uint8_t data[0];
+} __packed;
+
+#endif /* H_BTP_BASS_ */

apps/bttester/src/btp/btp_gap.h

@@ -70,6 +70,7 @@ struct btp_gap_read_controller_index_list_rp {
 #define BTP_GAP_SETTINGS_PRIVACY 13
 #define BTP_GAP_SETTINGS_CONTROLLER_CONFIG 14
 #define BTP_GAP_SETTINGS_STATIC_ADDRESS 15
+#define BTP_GAP_SETTINGS_EXTENDED_ADVERTISING 17
 #define BTP_GAP_SETTINGS_PERIODIC_ADVERTISING 18
 
 #define BTP_GAP_READ_CONTROLLER_INFO 0x03
@@ -258,6 +259,15 @@ struct btp_gap_set_filter_accept_list_cmd {
  ble_addr_t addrs[];
 } __packed;
 
+#define GAP_SET_EXT_ADV 0x21
+struct btp_gap_set_ext_advertising_cmd {
+ uint8_t flags;
+} __packed;
+
+struct btp_gap_set_ext_advertising_rp {
+ uint32_t current_settings;
+} __packed;
+
 #define GAP_PADV_CONFIGURE 0x22
 struct gap_periodic_adv_configure_cmd {
  uint8_t flags;

apps/bttester/src/btp/bttester.h

@@ -148,6 +148,9 @@ tester_init_bap(void);
 uint8_t
 tester_unregister_bap(void);
 #endif /* MYNEWT_VAL(BLE_ISO_BROADCAST_SOURCE) */
-
-#endif /* __BTTESTER_H__ */
+uint8_t
+tester_init_bass(void);
+uint8_t
+tester_unregister_bass(void);
+#endif /* MYNEWT_VAL(BLE_ISO_BROADCASTER) */
 

apps/bttester/src/btp_bass.c

@@ -0,0 +1,77 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+/* btp_bass.c - Bluetooth Broadcast Audio Stream Service Tester */
+
+#include "syscfg/syscfg.h"
+#include <stdint.h>
+
+#if MYNEWT_VAL(BLE_AUDIO)
+
+#include "btp/btp_bass.h"
+
+
+#include "btp/btp.h"
+#include "console/console.h"
+
+#include "nimble/ble.h"
+#include "host/ble_hs.h"
+#include "host/util/util.h"
+#include "math.h"
+
+#include "audio/ble_audio_broadcast_source.h"
+#include "services/bass/ble_audio_svc_bass.h"
+#include "audio/ble_audio.h"
+#include "host/ble_iso.h"
+
+#include "bsp/bsp.h"
+
+static uint8_t
+supported_commands(const void *cmd, uint16_t cmd_len,
+ void *rsp, uint16_t *rsp_len)
+{
+ return BTP_STATUS_SUCCESS;
+}
+
+static const struct btp_handler handlers[] = {
+ {
+ .opcode = BTP_BASS_READ_SUPPORTED_COMMANDS,
+ .index = BTP_INDEX_NONE,
+ .expect_len = 0,
+ .func = supported_commands,
+ },
+};
+
+uint8_t
+tester_init_bass(void)
+{
+ tester_register_command_handlers(BTP_SERVICE_ID_BASS, handlers,
+ ARRAY_SIZE(handlers));
+
+ return BTP_STATUS_SUCCESS;
+}
+
+uint8_t
+tester_unregister_bass(void)
+{
+ return BTP_STATUS_SUCCESS;
+}
+
+#endif /* MYNEWT_VAL(BLE_AUDIO) */
+

apps/bttester/src/btp_core.c

@@ -106,7 +106,7 @@ register_service(const void *cmd, uint16_t cmd_len,
  case BTP_SERVICE_ID_BAP:
  status = tester_init_bap();
  break;
-#endif /* MYNEWT_VAL(BLE_ISO_BROADCAST_SOURCE) */
+#endif /* MYNEWT_VAL(BLE_ISO_BROADCASTER) */
  case BTP_SERVICE_ID_GATTC:
  status = tester_init_gatt_cl();
  break;