Skip to content

Latest commit

 

History

History
141 lines (84 loc) · 5.65 KB

README.en.md

File metadata and controls

141 lines (84 loc) · 5.65 KB
Raw

Warp Scanner

language : 🇮🇷Persian| 🇹🇷Turkish| 🇬🇧English| 🇨🇳Chinese| 🇯🇵Japanese

نسخه اندرویدی با صفحه گرافیکی:

WarpScanner Android

Download Thermox from Google Play Do not download Thermox from Google Play

Termux 📲

Run the following code in AppTermax

212284100-561aa473-3905-4a80-b561-0d28506553ee

bash <(curl -fsSL https://raw.githubusercontent.com/arshiacomplus/WarpScanner/main/install.sh)

212284100-561aa473-3905-4a80-b561-0d28506553ee

[!WARNING]

Since it tries to install Python in the first step, it might need a VPN!

1. IP scanner is IPv4, IPv6

▫️ The ability to save version four IPs in storage/emulated/0/ and a file called result.csv
Therefore, it should be noted that by entering the number one and then y and maybe again y
And then you have to give the memory access to Termox that you are asked
And then
Note: You can create a clean IP for Vahid panel (with inter) and bpb panel (with comma).
Save in the result file
Then you enter the number one (IP version four)



2. Get Wireguard config

▫️اگه توی گرفتن کانفیگ وایرگارد به ارور تایم اوت خوردید چند بار دیگه تست کنید

3. Get Wireguard configuration without needing to scan IP

(It is for people who get the error best_result[0]they eat) In this case, you can first scan the IP from other scanners And after selecting the third option, you will be asked to enter the IP with the port, or if you enter N, it will select the IP that I have already entered.



4. To receive wireguard configuration in a sub link with the desired number, enter option 4. Try to use even numbers for the configuration number.

If you get a timeout error, try a few more times

5. To get Wireguard config for use in v2ray and MahsaNG

This is for those who get error requests 👈👈https://t.me/arshia_mod_fun/298

By entering option 1 and after that 2 You can get the IP version of Shish, which is also implemented for Option 5 Wireguard configuration for Mehsa Anji and Vettori.

After copying the Wire Guard configuration with the IP version of Shish and then importing it into the client, do this so as not to run into a bug.

  • 1. Pencil button
  • 2. Putting the bracket next to the IP[ipvsh]
  • 3. Storage

6. To get wireguard configuration for Vettori and Mehsa Anji and... without IP scan

If you press n, it will select the IP that I have already set Otherwise IP with port example:

ipv4:port you enter

7. To get config, warp on warp for v2ray and MahsaNG, you can use option 7 (help was taken from the bpb panel....)

You will be asked whether Po sites (Kung Fu Panda) will be blocked or not

8. You can sub warp that warp for v2ray or MahsaNg



9. You can make a short cut

Give it a name and close the Thermox window and open a new one.

Type of use:

  • Enter the name you gave to run the script
  • To delete it, press the same number again and press Y



10. Open this config file option.confWireguard is made for Windscribe and Wireguard

11. By clicking this option, you can get a wireguard configuration for Nika Anji

12. By clicking this option, you can get Wireguard configuration for Nika Anji without the need to scan IP

13. To get Wireguard Wow config with noise values ​​for Nika Anji and Mehsa Anji

14. برای گرفته کانفیگ وایرگارد Wow با مقادیر نویز برای نیکا انجی و مهسا انجی در ساب لینک

15. To get the wireguard configuration for Singbox and the old version of Hidify

16. To get Wireguard configuration for Singbox and old version of Hidify without IP scan

17. To get the wireguard configuration for Singbox and the old version of Hidify in the sublink of the option

to donate

Trx:
TKUpVDG5DqLDUSg3X1hhidRPuhm1GmqZ2G
USDT:
0xpsi10bdbhhddfsfhbhbhhsssssssssss 42296553aa

Support the project

If you like my project, you can support my project by giving stars, following and introducing it to your friends

آموزش ویدیو ای بزودی گذاشته میشه ❤️ در حال توسعه ست پس اگه پیشنهادی داشتید بهشون بفرمائید