Skip to content

SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

License

Notifications You must be signed in to change notification settings

atopile/spin-servo-drive

Repository files navigation

Servos are dope.

Compared to the steppers we stick on our 3D printers, CNC machines and paintball turrets:

  • They're way faster 🏃
  • Far more powerful (higher torque for longer) 💪
  • More accurate (higher resolution) 🎯
  • And they're closed loop (they know where they are) 🤖

The only downside is that they're expensive, like hundreds of dollars.

Introducing spin ✨ - the $30 servo for the masses (designed with atopile)

spin

Wiggle wiggle wiggle

wiggle-wiggle-wiggle

Build your own Spin Servo Motor Drive

This project is fully open source and designed with atopile, a new language and compiler to design electronics with code.

Latest auto-generated artifacts

Electronics: Gerbers, Bill of material, position files

Firmware

3D Files (PDFs, STEP files in the future)

Goals + (default) Specs

  • Obviously better option than stepper motors for 3D printers, CNC machines and robotics

  • Open-source design that is easy to:

    • contribute to
    • fork maintainable derivatives of
    • robust
  • 2x CAN comms with JST-GH connectors

  • XT30 power connector

  • 0.25Nm continuous rated torque (0.75Nm peak)

  • <0.1° resolution

  • 12V-24V input voltage

Getting started

This project was written in ato, a new electronics description language we are developing to help create and share electronic designs. Get started here: https://atopile.io/getting-started

Electronics

Write me please!

Firmware

Install PlatformIO into VSCode. It has the utilities to build, upload and debug the firmware.

You may also need to install libusb (eg. brew install libusb on OSx) to run the build!

There are a few build configurations:

  • debug is intended as a JTAG configuration and includes symbols to run the debugger.
  • dfu-manual uses the GNU command-line dfu-utility to trigger the upload via USB (Recommended USB workflow)
  • dfu uses the built-in PlatformIO dfu utility to program via USB (which I struggled with on OSx)

To run a build either use the sidebar (easiest IMO) or PlatformIO CLI (pio run --help).

Side-bar

platformio

CLI

platformio-cli

About

SPIN ✨ - Servos are awesome 🤩. Spin is an open-source hardware project to make it easy and cost effective to use fully-fledged BLDC servo motors 🚀

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published