ApHSC (Arduino powered Heated Seat Controller)

Aftermarket Heated Seat Switching (powered by Arduino)

By: Luis E Alvarado

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Software | Hardware

Purpose:

To control a ComfortHeat "Automotive Carbon Fiber Seat Heaters" by Rostra
with the stock control panel of a vehicle, in my case, a 2011 Suzuki Kizashi.

Rostra Kit: 250-1872 - Universal Kit, Double thumb-dial Switch

Notes:

This program requires the use of additional hardware for proper functionality.
Please visit the hardware link above to check that out.

Instructions:

Rev. 2:

Solder all components and mount your Arduino Nano to the board.
Flash via USB.

Rev. 4b:

Solder (Reflow Oven recommended) all components.
Use an Arduino Uno as ISP, the official Arduino ISP or compatible programmer to flash over ICSP.

Releases