This is the base Nerves System configuration for the Raspberry Pi 4 Model B.
Michael Henzler / Wikimedia Commons / CC BY-SA
4.0
Feature | Description |
---|---|
CPU | 1.5 GHz quad-core Cortex-A72 (64-bit mode) |
Memory | 1 GB, 2 GB, 4 GB DRAM |
Storage | MicroSD |
Linux kernel | 6.1 w/ Raspberry Pi patches |
IEx terminal | HDMI and USB keyboard (can be changed to UART) |
GPIO, I2C, SPI | Yes - Elixir Circuits |
ADC | No |
PWM | Yes, but no Elixir support |
UART | 1 available - ttyS0 |
Display | HDMI or 7" RPi Touchscreen |
Camera | Official RPi Cameras (libcamera) |
Ethernet | Yes |
WiFi | Yes - VintageNet |
Bluetooth | Untested |
Audio | HDMI/Stereo out |
The most common way of using this Nerves System is create a project with mix nerves.new
and to export MIX_TARGET=rpi4
. See the Getting started
guide
for more information.
If you need custom modifications to this system for your device, clone this repository and update as described in Making custom systems.
Compilation times for a full system build take over an hour. Individual packages can be rebuilt using buildroot locally.
In order to rebuild the openocd_ly
package cleanly, after a local full build, the following commands can be run:
mix nerves.system.shell
make openocd_ly-dirclean
make
exit
The base image includes drivers for the onboard Raspberry Pi 4 wifi module
(brcmfmac
driver).
This system supports the official Raspberry Pi camera modules via
libcamera
. The libcamera
applications are included so it's
possible to replicate many of the examples in the official Raspberry Pi Camera
Documentation.
Here's an example commandline to run:
cmd("libcamera-jpeg -n -v -o /data/test.jpeg")
On success, you'll get an image in /data
that you can copy off with sftp
.
Since libcamera
is being used instead of MMAL, the Elixir
picam library won't work.
The Raspberry Pi has many options for audio output. This system supports the HDMI and stereo audio jack output. The Linux ALSA drivers are used for audio output.
The general Raspberry Pi audio documentation mostly applies to Nerves. For example, to force audio out the HDMI port, run:
cmd("amixer cset numid=3 2")
Change the last argument to amixer
to 1
to output to the stereo output jack.
This system supports storing provisioning information in a small key-value store outside of any filesystem. Provisioning is an optional step and reasonable defaults are provided if this is missing.
Provisioning information can be queried using the Nerves.Runtime KV store's
Nerves.Runtime.KV.get/1
function.
Keys used by this system are:
Key | Example Value | Description |
---|---|---|
nerves_serial_number |
"12345678" |
By default, this string is used to create unique hostnames and Erlang node names. If unset, it defaults to part of the Raspberry Pi's device ID. |
The normal procedure would be to set these keys once in manufacturing or before deployment and then leave them alone.
For example, to provision a serial number on a running device, run the following and reboot:
iex> cmd("fw_setenv nerves_serial_number 12345678")
This system supports setting the serial number offline. To do this, set the
NERVES_SERIAL_NUMBER
environment variable when burning the firmware. If you're
programming MicroSD cards using fwup
, the commandline is:
sudo NERVES_SERIAL_NUMBER=12345678 fwup path_to_firmware.fw
Serial numbers are stored on the MicroSD card so if the MicroSD card is replaced, the serial number will need to be reprogrammed. The numbers are stored in a U-boot environment block. This is a special region that is separate from the application partition so reformatting the application partition will not lose the serial number or any other data stored in this block.
Additional key value pairs can be provisioned by overriding the default
provisioning.conf file location by setting the environment variable
NERVES_PROVISIONING=/path/to/provisioning.conf
. The default provisioning.conf
will set the nerves_serial_number
, if you override the location to this file,
you will be responsible for setting this yourself.
There's a subtle coupling between the nerves_system_br
version and the Linux
kernel version used here. nerves_system_br
provides the versions of
rpi-userland
and rpi-firmware
that get installed. I prefer to match them to
the Linux kernel to avoid any issues. Unfortunately, none of these are tagged by
the Raspberry Pi Foundation so I either attempt to match what's in Raspbian or
take versions of the repositories that have similar commit times.
The Linux kernel compiled for Nerves is a stripped down version of the default Raspberry Pi Linux kernel. This is done to remove unnecessary features, select some Nerves-specific features like F2FS and SquashFS support, and to save space.