Version 0.1.2

- VSYS on PWR_ON1 and COEX0 on RF frontend. - RF switch is flipped back to correct position. - minor visual corrections in the schematics. Co-Authored-By: Eirik Skanke <eirik.skanke@nordicsemi.no>
bifravst · Jun 18, 2020 · 8d01c13 · 8d01c13
1 parent 87b8b51
commit 8d01c13
Show file tree

Hide file tree

Showing 39 changed files with 1,222 additions and 731 deletions.
diff --git a/README.md b/README.md
@@ -2,6 +2,8 @@
 
 Design files for a custom cat tracker board based on the [nRF9160](https://www.nordicsemi.com/Products/Low-power-cellular-IoT/nRF9160).
 
+See [the PDF slides](./presentation.pdf) for an introduction to the design.
+
 ## Front
 
 ![3D Rendering](./3d.jpg)

diff --git a/altium files/_main.SchDoc b/altium files/_main.SchDoc
diff --git a/altium files/_nRF9160.SchDoc b/altium files/_nRF9160.SchDoc
diff --git a/altium files/_nRF9160_tracker_v0_1_2.BomDoc b/altium files/_nRF9160_tracker_v0_1_2.BomDoc
diff --git a/altium files/_power.SchDoc b/altium files/_power.SchDoc
diff --git a/altium files/_sensors_and_IOs.SchDoc b/altium files/_sensors_and_IOs.SchDoc
diff --git a/altium files/_tracker.PcbDoc b/altium files/_tracker.PcbDoc
diff --git a/altium files/_nRF9160_tracker.PrjPcb → altium files/cat_tracker_v0_1_2.PrjPcb b/altium files/_nRF9160_tracker.PrjPcb → altium files/cat_tracker_v0_1_2.PrjPcb
@@ -28,7 +28,7 @@ DItemRevisionGUID=
 ReportSuppressedErrorsInMessages=0
 FSMCodingStyle=eFMSDropDownList_OneProcess
 FSMEncodingStyle=eFMSDropDownList_OneHot
-OutputPath=
+OutputPath=Project Outputs for _nRF9160_tracker_v0_1_2
 LogFolderPath=
 ManagedProjectGUID=
 IncludeDesignInRelease=0
@@ -157,7 +157,7 @@ GenerateClassCluster=0
 DocumentUniqueId=DAKDJTNB
 
 [Document8]
-DocumentPath=_power.Harness
+DocumentPath=_nRF9160_tracker_v0_1_2.BomDoc
 AnnotationEnabled=1
 AnnotateStartValue=1
 AnnotationIndexControlEnabled=0
@@ -174,7 +174,7 @@ GenerateClassCluster=0
 DocumentUniqueId=
 
 [Document9]
-DocumentPath=_nRF9160.Harness
+DocumentPath=_nRF9160_tracker_v0_1_2.OutJob
 AnnotationEnabled=1
 AnnotateStartValue=1
 AnnotationIndexControlEnabled=0
@@ -191,6 +191,40 @@ GenerateClassCluster=0
 DocumentUniqueId=
 
 [Document10]
+DocumentPath=_power.Harness
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=
+
+[Document11]
+DocumentPath=_nRF9160.Harness
+AnnotationEnabled=1
+AnnotateStartValue=1
+AnnotationIndexControlEnabled=0
+AnnotateSuffix=
+AnnotateScope=All
+AnnotateOrder=-1
+DoLibraryUpdate=1
+DoDatabaseUpdate=1
+ClassGenCCAutoEnabled=1
+ClassGenCCAutoRoomEnabled=1
+ClassGenNCAutoScope=None
+DItemRevisionGUID=
+GenerateClassCluster=0
+DocumentUniqueId=
+
+[Document12]
 DocumentPath=_sensors_and_IOs.Harness
 AnnotationEnabled=1
 AnnotateStartValue=1
@@ -236,15 +270,15 @@ AutoOpenFile=-1
 AutoOpenOutJob=-1
 
 [Generic_SmartPDFSettings]
-ProjectMode=-1
+ProjectMode=0
 ZoomPrecision=50
 AddNetsInformation=-1
 AddNetPins=-1
 AddNetNetLabels=-1
 AddNetPorts=-1
 ShowComponentParameters=-1
 GlobalBookmarks=0
-ExportBOM=0
+ExportBOM=-1
 TemplateFilename=BOM Simple.XLT
 TemplateStoreRelative=-1
 PCB_PrintColor=1
@@ -268,7 +302,7 @@ SCH_HasExpandLogicalToPhysicalSheets=-1
 SaveSettingsToOutJob=0
 
 [Generic_EDE]
-OutputDir=
+OutputDir=Project Outputs for _nRF9160_tracker_v0_1_2
 
 [OutputGroup1]
 Name=Netlist Outputs
@@ -379,7 +413,7 @@ OutputDefault20=0
 [OutputGroup2]
 Name=Simulator Outputs
 Description=
-TargetPrinter=\\viper.nvlsi.no\TRD-E2-PRINT01
+TargetPrinter=Microsoft Print to PDF
 PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
 
 [OutputGroup3]
@@ -425,8 +459,10 @@ OutputType2=PCB 3D Print
 OutputName2=PCB 3D Print
 OutputDocumentPath2=
 OutputVariantName2=[No Variations]
-OutputDefault2=0
+OutputDefault2=1
 PageOptions2=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintScale=1.00|XCorrection=1.00|YCorrection=1.00|PrintKind=1|BorderSize=5000000|LeftOffset=0|BottomOffset=0|Orientation=2|PaperLength=1000|PaperWidth=1000|Scale=100|PaperSource=7|PrintQuality=-3|MediaType=1|DitherType=10|PrintScaleMode=1|PaperKind=A4|PaperIndex=9
+Configuration2_Name1=OutputConfigurationParameter1
+Configuration2_Item1=Record=Pcb3DPrintView|ResX=300|ResY=300|ViewX=29176712|ViewY=19577366|LookAtX=15265682|LookAtY=46764232|LookAtZ=-49999.99609375|UpX=-0.457059860229492|UpY=0.548314452171326|UpZ=-0.700319468975067|FOV=45|QuatX=-0.36692476272583|QuatY=-0.0969592332839966|QuatZ=0.302007764577866|QuatW=0.874503552913666|Zoom=5.28160950258631E-5|UnitsPercent=True|UnitsDPI=True|LockResAspect=True|ViewConfigType=.config_3d|CustomCamera=True|ViewFromTop=True|ScreenWidth=1541|ScreenHeight=1034|ViewConfig=RECORD\3Board\2CFGALL.CONFIGURATIONKIND\33\2CFGALL.CONFIGURATIONDESC\3Altium%203D%20Blue%20Configuration\2CFGALL.COMPONENTBODYREFPOINTCOLOR\316777215\2CFGALL.COMPONENTBODYSNAPPOINTCOLOR\316777215\2CFGALL.SHOWCOMPONENTSNAPMARKERS\3FALSE\2CFG3D.POSITIVETOPSOLDERMASK\3TRUE\2CFG3D.POSITIVEBOTTOMSOLDERMASK\3TRUE\2CFG3D.SHOWCOMPONENTBODIES\3TRUE\2CFG3D.SHOWCOMPONENTSTEPMODELS\3TRUE\2CFG3D.COMPONENTMODELPREFERENCE\30\2CFG3D.SHOWCOMPONENTAXES\3TRUE\2CFG3D.SHOWBOARDCORE\3TRUE\2CFG3D.SHOWBOARDPREPREG\3TRUE\2CFG3D.SHOWTOPSILKSCREEN\3TRUE\2CFG3D.SHOWBOTSILKSCREEN\3TRUE\2CFG3D.SHOWORIGINMARKER\3TRUE\2CFG3D.EYEDIST\32000\2CFG3D.SHOWCUTOUTS\3TRUE\2CFG3D.SHOWROUTETOOLPATH\3TRUE\2CFG3D.SHOWROOMS3D\3FALSE\2CFG3D.USESYSCOLORSFOR3D\3FALSE\2CFG3D.WORKSPACECOLOR\38553110\2CFG3D.BOARDCORECOLOR\313761015\2CFG3D.BOARDPREPREGCOLOR\30\2CFG3D.TOPSOLDERMASKCOLOR\37026967\2CFG3D.BOTSOLDERMASKCOLOR\37026967\2CFG3D.COPPERCOLOR\33323360\2CFG3D.TOPSILKSCREENCOLOR\315461355\2CFG3D.BOTSILKSCREENCOLOR\315461355\2CFG3D.WORKSPACELUMINANCEVARIATION\330\2CFG3D.WORKSPACEBEGINCOLOR\316777215\2CFG3D.WORKSPACEENDCOLOR\316777215\2CFG3D.WORKSPACECOLOROPACITY\31.000000\2CFG3D.BOARDCORECOLOROPACITY\31.000000\2CFG3D.BOARDPREPREGCOLOROPACITY\30.500000\2CFG3D.TOPSOLDERMASKCOLOROPACITY\30.860000\2CFG3D.BOTSOLDERMASKCOLOROPACITY\30.857557\2CFG3D.COPPERCOLOROPACITY\31.000000\2CFG3D.TOPSILKSCREENCOLOROPACITY\31.000000\2CFG3D.BOTSILKSCREENCOLOROPACITY\31.000000\2CFG3D.BOARDTHICKNESSSCALING\31.000000\2CFG3D.SHOWMECHANICALLAYERS\3FALSE\2CFG3D.MECHANICALLAYERSOPACITY\31.000000
 OutputType3=PCB 3D Video
 OutputName3=PCB 3D Video
 OutputDocumentPath3=
@@ -487,7 +523,7 @@ PageOptions11=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|Print
 [OutputGroup4]
 Name=Assembly Outputs
 Description=
-TargetPrinter=\\viper.nvlsi.no\TRD-E2-PRINT01
+TargetPrinter=Microsoft Print to PDF
 PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
 OutputType1=Test Points For Assembly
 OutputName1=Test Point Report
@@ -513,7 +549,7 @@ PageOptions3=Record=PageOptions|CenterHorizontal=True|CenterVertical=True|PrintS
 [OutputGroup5]
 Name=Fabrication Outputs
 Description=
-TargetPrinter=\\viper.nvlsi.no\TRD-E2-PRINT01
+TargetPrinter=Microsoft Print to PDF
 PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintJobKind=1|PrintWhat=1
 OutputType1=CompositeDrill
 OutputName1=Composite Drill Drawing
@@ -1041,36 +1077,6 @@ OutputName11=Export STEP
 OutputDocumentPath11=
 OutputVariantName11=
 OutputDefault11=0
-OutputType12=Ansoft Neutral
-OutputName12=Ansoft Neutral (AutoPCB)
-OutputDocumentPath12=
-OutputVariantName12=
-OutputDefault12=0
-OutputType13=HyperLynx
-OutputName13=HyperLynx (AutoPCB)
-OutputDocumentPath13=
-OutputVariantName13=
-OutputDefault13=0
-OutputType14=Orcad v7 Capture Design
-OutputName14=Orcad v7 Capture Design (AutoSCH)
-OutputDocumentPath14=
-OutputVariantName14=
-OutputDefault14=0
-OutputType15=P-CAD ASCII
-OutputName15=P-CAD ASCII (AutoPCB)
-OutputDocumentPath15=
-OutputVariantName15=
-OutputDefault15=0
-OutputType16=P-CAD V16 Schematic Design
-OutputName16=P-CAD V16 Schematic Design (AutoSCH)
-OutputDocumentPath16=
-OutputVariantName16=
-OutputDefault16=0
-OutputType17=SiSoft
-OutputName17=SiSoft (AutoPCB)
-OutputDocumentPath17=
-OutputVariantName17=
-OutputDefault17=0
 
 [OutputGroup10]
 Name=PostProcess Outputs

diff --git a/documentation/nRF9160_tracker_BOM.pdf b/documentation/nRF9160_tracker_BOM.pdf
diff --git a/documentation/nRF9160_tracker_pcb_3d.pdf b/documentation/nRF9160_tracker_pcb_3d.pdf
diff --git a/documentation/nRF9160_tracker_schematic.pdf b/documentation/nRF9160_tracker_schematic.pdf
diff --git a/documentation/nRF9160_tracker_schematic_and_pcb.pdf b/documentation/nRF9160_tracker_schematic_and_pcb.pdf
diff --git a/documentation/nRF9160_tracker_stackup.pdf b/documentation/nRF9160_tracker_stackup.pdf
diff --git a/documentation/tracker_assembly_drawing.pdf b/documentation/tracker_assembly_drawing.pdf
diff --git a/documentation/tracker_dimensions.pdf b/documentation/tracker_dimensions.pdf
diff --git a/documentation/tracker_pcb.pdf b/documentation/tracker_pcb.pdf
diff --git a/documentation/tracker_user_guide_drawings.pdf b/documentation/tracker_user_guide_drawings.pdf
diff --git a/presentation.pdf b/presentation.pdf
diff --git a/production files/Status Report.Txt b/production files/Status Report.Txt
@@ -0,0 +1,10 @@
+Output: _tracker_pick_and_place
+Type  : Pick Place
+From  : PCB Document [_tracker.PcbDoc]
+   Generated File[_tracker_pick_and_place.csv]
+
+
+Files Generated   : 1
+Documents Printed : 0
+
+Finished Output Generation At 15:05:42 On 18.06.2020
diff --git a/production files/_tracker.DRR b/production files/_tracker.DRR
@@ -1,5 +1,5 @@
 ----------------------------------------------------------------------------------------------------------------------------------
-NCDrill File Report For: _tracker.PcbDoc   12.02.2020  14:52:57
+NCDrill File Report For: _tracker.PcbDoc   18.06.2020  15:05:40
 ----------------------------------------------------------------------------------------------------------------------------------
 
 Layer Pair : Top Layer to Bottom Layer

diff --git a/production files/_tracker.EXTREP b/production files/_tracker.EXTREP
@@ -1,5 +1,5 @@
 ------------------------------------------------------------------------------------------
-Gerber File Extension Report For: _tracker.GBR   12.02.2020  14:52:58
+Gerber File Extension Report For: _tracker.GBR   18.06.2020  15:05:41
 ------------------------------------------------------------------------------------------
 
 
@@ -8,12 +8,12 @@ Layer Extension     Layer Description
 ------------------------------------------------------------------------------------------
 .GTO                Top Overlay                             
 .GTP                Top Paste                               
-.GTS                Top Solder                              
+.GTS                Top Solder Mask                         
 .GTL                Top Layer                               
 .G1                 Mid-Layer 1                             
 .G2                 Mid-Layer 2                             
 .GBL                Bottom Layer                            
-.GBS                Bottom Solder                           
+.GBS                Bottom Solder Mask                      
 .GBP                Bottom Paste                            
 .GBO                Bottom Overlay                          
 .GM1                Board Outline                           

diff --git a/production files/_tracker.G1 b/production files/_tracker.G1
@@ -1,5 +1,5 @@
 G04*
-G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.9 (164)*
+G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.13 (296)*
 G04*
 G04 Layer_Physical_Order=2*
 G04 Layer_Color=36540*

diff --git a/production files/_tracker.G2 b/production files/_tracker.G2
@@ -1,5 +1,5 @@
 G04*
-G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.9 (164)*
+G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.13 (296)*
 G04*
 G04 Layer_Physical_Order=3*
 G04 Layer_Color=16440176*
@@ -12,7 +12,7 @@ G75*
 %ADD12C,0.0059*%
 %ADD15C,0.0118*%
 %ADD19C,0.0049*%
-%ADD128C,0.0197*%
+%ADD127C,0.0197*%
 %ADD139O,0.0354X0.0630*%
 %ADD142C,0.0197*%
 %ADD143C,0.0240*%
@@ -3676,7 +3676,7 @@ X12062Y9626D02*
 X12490D01*
 X7079Y8550D02*
 X7386D01*
-D128*
+D127*
 X2087Y7966D02*
 X4014D01*
 X-3272Y7432D02*

diff --git a/production files/_tracker.GBL b/production files/_tracker.GBL
@@ -1,5 +1,5 @@
 G04*
-G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.9 (164)*
+G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,20.0.13 (296)*
 G04*
 G04 Layer_Physical_Order=4*
 G04 Layer_Color=16711680*
@@ -18,7 +18,7 @@ G75*
 %ADD119C,0.0236*%
 %ADD122C,0.0354*%
 %ADD123C,0.1181*%
-%ADD128C,0.0197*%
+%ADD127C,0.0197*%
 %ADD138C,0.0390*%
 %ADD139O,0.0354X0.0630*%
 %ADD140C,0.0591*%
@@ -2292,7 +2292,7 @@ D03*
 D123*
 X14764Y10827D02*
 D03*
-D128*
+D127*
 X-1417Y10236D02*
 X-866Y10787D01*
 X-2392Y10236D02*