AceRoutine

NEW: Profiling in v1.5: Version 1.5 adds the ability to profile the execution time of Coroutine::runCoroutine() and render the histogram as a table or a JSON object. See Coroutine Profiling for details.

A low-memory, fast-switching, cooperative multitasking library using stackless coroutines on Arduino platforms.

This library is an implementation of the ProtoThreads library for the Arduino platform. It emulates a stackless coroutine that can suspend execution using a yield() or delay() functionality to allow other coroutines to execute. When the scheduler makes its way back to the original coroutine, the execution continues right after the yield() or delay().

There are only 2 core classes in this library:

Coroutine class provides the context variables for all coroutines
CoroutineScheduler class handles the scheduling (optional)

The following classes are used for profiling:

CoroutineProfiler interface
LogBinProfiler provides an implementation that tracks the execution time in 32 logarithmic bins from 1us to 4295s.
LogBinTableRenderer prints the histogram as a table
LogBinJsonRenderer prints the histogram as a JSON object

The following is an experimental feature whose API and functionality may change considerably in the future:

Channel class allows coroutines to send messages to each other

The library provides a number of macros to help create coroutines and manage their life cycle:

COROUTINE(): defines an instance of the Coroutine class or an instance of a user-defined subclass of Coroutine
COROUTINE_BEGIN(): must occur at the start of a coroutine body
COROUTINE_END(): must occur at the end of the coroutine body
COROUTINE_YIELD(): yields execution back to the caller, often CoroutineScheduler but not necessarily
COROUTINE_AWAIT(condition): yield until condition becomes true
COROUTINE_DELAY(millis): yields back execution for millis. The millis parameter is defined as a uint16_t.
COROUTINE_DELAY_MICROS(micros): yields back execution for micros. The micros parameter is defined as a uint16_t.
COROUTINE_DELAY_SECONDS(seconds): yields back execution for seconds. The seconds parameter is defined as a uint16_t.
COROUTINE_LOOP(): convenience macro that loops forever
COROUTINE_CHANNEL_WRITE(channel, value): writes a value to a Channel
COROUTINE_CHANNEL_READ(channel, value): reads a value from a Channel

Here are some of the compelling features of this library compared to others (in my opinion of course):

low memory usage
- 8-bit (e.g. AVR) processors:
  - the first Coroutine consumes about 230 bytes of flash
  - each additional Coroutine consumes 170 bytes of flash
  - each Coroutine consumes 16 bytes of static RAM
  - CoroutineScheduler consumes only about 40 bytes of flash and 2 bytes of RAM independent of the number of coroutines
- 32-bit (e.g. STM32, ESP8266, ESP32) processors
  - the first Coroutine consumes between 120-450 bytes of flash
  - each additional Coroutine consumes about 130-160 bytes of flash,
  - each Coroutine consumes 28 bytes of static RAM
  - CoroutineScheduler consumes only about 40-60 bytes of flash and 4 bytes of static RAM independent of the number of coroutines
extremely fast context switching
- Direct Scheduling (call Coroutine::runCoroutine() directly)
  - ~1.0 microseconds on a 16 MHz ATmega328P
  - ~0.4 microseconds on a 48 MHz SAMD21
  - ~0.3 microseconds on a 72 MHz STM32
  - ~0.3 microseconds on a 80 MHz ESP8266
  - ~0.1 microseconds on a 240 MHz ESP32
  - ~0.17 microseconds on 96 MHz Teensy 3.2 (depending on compiler settings)
- Coroutine Scheduling (use CoroutineScheduler::loop()):
  - ~5.2 microseconds on a 16 MHz ATmega328P
  - ~1.3 microseconds on a 48 MHz SAMD21
  - ~0.9 microseconds on a 72 MHz STM32
  - ~0.8 microseconds on a 80 MHz ESP8266
  - ~0.3 microseconds on a 240 MHz ESP32
  - ~0.4 microseconds on 96 MHz Teensy 3.2 (depending on compiler settings)
uses the computed goto feature of the GCC compiler (also supported by Clang) to avoid the Duff's Device hack
- allows switch statements in the coroutines
C/C++ macros eliminate boilerplate code and make the code easy to read
the base Coroutine class is easy to subclass to add additional variables and functions
fully unit tested using AUnit

Some limitations are:

A Coroutine cannot return any values.
A Coroutine is stackless and therefore cannot preserve local stack variables across multiple calls. Often the class member variables or function static variables are reasonable substitutes.
Coroutines are designed to be statically allocated, not dynamically created and destroyed on the heap. Dynamic memory allocation on an 8-bit microcontroller with 2kB of RAM would cause too much heap fragmentation. And the virtual destructor pulls in malloc() and free() which increases flash memory by 600 bytes on AVR processors.
A Channel is an experimental feature and has limited features. It is currently an unbuffered, synchronized channel. It can be used by only one reader and one writer.

After I had completed most of this library, I discovered that I had essentially reimplemented the <ProtoThread.h> library in the Cosa framework. The difference is that AceRoutine is a self-contained library that works on any platform supporting the Arduino API (AVR, Teensy, ESP8266, ESP32, etc), and it provides a handful of additional macros that can reduce boilerplate code.

Version: 1.5.1 (2022-09-20)

Changelog: CHANGELOG.md

Hello Coroutines

HelloCoroutine

This is the HelloCoroutine.ino sample sketch which uses the COROUTINE() macro to automatically handle a number of boilerplate code, and some internal bookkeeping operations. Using the COROUTINE() macro works well for relatively small and simple coroutines.

#include <AceRoutine.h>
using namespace ace_routine;

const int LED = LED_BUILTIN;
const int LED_ON = HIGH;
const int LED_OFF = LOW;

COROUTINE(blinkLed) {
  COROUTINE_LOOP() {
    digitalWrite(LED, LED_ON);
    COROUTINE_DELAY(100);
    digitalWrite(LED, LED_OFF);
    COROUTINE_DELAY(500);
  }
}

COROUTINE(printHelloWorld) {
  COROUTINE_LOOP() {
    Serial.print(F("Hello, "));
    Serial.flush();
    COROUTINE_DELAY(1000);
    Serial.println(F("World"));
    COROUTINE_DELAY(4000);
  }
}

void setup() {
  delay(1000);
  Serial.begin(115200);
  while (!Serial); // Leonardo/Micro
  pinMode(LED, OUTPUT);
}

void loop() {
  blinkLed.runCoroutine();
  printHelloWorld.runCoroutine();
}

The printHelloWorld coroutine prints "Hello, ", waits 1 second, then prints "World", then waits 4 more seconds, then repeats from the start. At the same time, the blinkLed coroutine blinks the builtin LED on and off, on for 100 ms and off for 500 ms.

HelloScheduler

The HelloScheduler.ino sketch implements the same thing using the CoroutineScheduler:

#include <AceRoutine.h>
using namespace ace_routine;

... // same as above

void setup() {
  delay(1000);
  Serial.begin(115200);
  while (!Serial); // Leonardo/Micro
  pinMode(LED, OUTPUT);

  CoroutineScheduler::setup();
}

void loop() {
  CoroutineScheduler::loop();
}

The CoroutineScheduler can automatically manage all coroutines defined by the COROUTINE() macro, which eliminates the need to itemize your coroutines in the loop() method manually. Unfortunately, this convenience is not free (see MemoryBenchmark):

The CoroutineScheduler singleton instance increases the flash memory by about 110 bytes.
The CoroutineScheduler::loop() method calls the Coroutine::runCoroutine() method through the virtual dispatch instead of directly, which is slower and takes more flash memory.
Each Coroutine instance consumes an additional ~70 bytes of flash when using the CoroutineScheduler.

On 8-bit processors with limited memory, the additional resource consumption can be important. On 32-bit processors with far more memory, these additional resources are often inconsequential. Therefore the CoroutineScheduler is recommended mostly on 32-bit processors.

HelloManualCoroutine

The HelloManualCoroutine.ino program shows what the code looks like without the convenience of the COROUTINE() macro. For more complex programs, with more than a few coroutines, especially if the coroutines need to communicate with each other, this coding structure can be more powerful.

#include <Arduino.h>
#include <AceRoutine.h>
using namespace ace_routine;

const int LED = LED_BUILTIN;
const int LED_ON = HIGH;
const int LED_OFF = LOW;

class BlinkLedCoroutine: public Coroutine {
  public:
    int runCoroutine() override {
      COROUTINE_LOOP() {
        digitalWrite(LED, LED_ON);
        COROUTINE_DELAY(100);
        digitalWrite(LED, LED_OFF);
        COROUTINE_DELAY(500);
      }
    }
};

class PrintHelloWorldCoroutine: public Coroutine {
  public:
    int runCoroutine() override {
      COROUTINE_LOOP() {
        Serial.print(F("Hello, "));
        Serial.flush();
        COROUTINE_DELAY(1000);
        Serial.println(F("World"));
        COROUTINE_DELAY(4000);
      }
    }
};

BlinkLedCoroutine blinkLed;
PrintHelloWorldCoroutine printHelloWorld;

void setup() {
  delay(1000);
  Serial.begin(115200);
  while (!Serial); // Leonardo/Micro
  pinMode(LED, OUTPUT);
}

void loop() {
  blinkLed.runCoroutine();
  printHelloWorld.runCoroutine();
}

HelloCoroutineWithProfiler

Version 1.5 added support for profiling the execution time of Coroutine::runCoroutine() through the CoroutineProfiler interface. Currently only a single implementation (LogBinProfiler) is provided.

The HelloCoroutineWithProfiler.ino program shows how to setup the profilers and extract the profiling information using the Coroutine::runCoroutineWithProfiler() instead of the usual Coroutine::runCoroutine():

#include <AceRoutine.h>
using namespace ace_routine;

const int PIN = 2;
const int LED = LED_BUILTIN;
const int LED_ON = HIGH;
const int LED_OFF = LOW;

COROUTINE(blinkLed) {
  COROUTINE_LOOP() {
    digitalWrite(LED, LED_ON);
    COROUTINE_DELAY(100);
    digitalWrite(LED, LED_OFF);
    COROUTINE_DELAY(500);
  }
}

COROUTINE(printHelloWorld) {
  COROUTINE_LOOP() {
    Serial.print(F("Hello, "));
    Serial.flush();
    COROUTINE_DELAY(1000);
    Serial.println(F("World"));
    COROUTINE_DELAY(4000);
  }
}

COROUTINE(printProfiling) {
  COROUTINE_LOOP() {
    LogBinTableRenderer::printTo(
        Serial, 3 /*startBin*/, 14 /*endBin*/, false /*clear*/);
    LogBinJsonRenderer::printTo(
        Serial, 3 /*startBin*/, 14 /*endBin*/);

    COROUTINE_DELAY(5000);
  }
}

LogBinProfiler profiler1;
LogBinProfiler profiler2;
LogBinProfiler profiler3;

void setup() {
  delay(1000);
  Serial.begin(115200);
  while (!Serial); // Leonardo/Micro

  pinMode(LED, OUTPUT);
  pinMode(PIN, INPUT);

  // Coroutine names can be either C-string or F-string.
  blinkLed.setName("blinkLed");
  readPin.setName(F("readPin"));

  // Manually attach the profilers to the coroutines.
  blinkLed.setProfiler(&profiler1);
  readPin.setProfiler(&profiler2);
  printProfiling.setProfiler(&profiler3);
}

void loop() {
  blinkLed.runCoroutineWithProfiler();
  printHelloWorld.runCoroutineWithProfiler();
  printProfiling.runCoroutineWithProfiler();
}

Every 5 seconds, the printProfiling coroutine will print the profiling information in 2 formats on the Serial port:

a formatted table through the LogBinTableRenderer
a JSON object using the LogBinJsonRenderer

name         <16us <32us <64us<128us<256us<512us  <1ms  <2ms  <4ms  <8ms    >>
0x1DB        16921 52650     0     0     0     0     0     0     0     0     1
readPin      65535  1189     0     0     0     0     0     0     0     0     0
blinkLed     65535   830     0     0     0     0     0     0     0     0     0
{
"0x1DB":[16921,52650,0,0,0,0,0,0,0,0,1],
"readPin":[65535,1189,0,0,0,0,0,0,0,0,0],
"blinkLed":[65535,830,0,0,0,0,0,0,0,0,0]
}

HelloSchedulerWithProfiler

The HelloSchedulerWithProfiler.ino sketch implements the same thing as HelloCoroutineWithProfiler using 2 techniques to handle more than a handful of coroutines:

use LogBinProfiler::createProfilers() to automatically create the profilers on the heap and assign them to all coroutines
use CoroutineScheduler::loopWithProfiler() method instead of the CoroutineScheduler::loop() method.

#include <AceRoutine.h>
using namespace ace_routine;

const int PIN = 2;
const int LED = LED_BUILTIN;
const int LED_ON = HIGH;
const int LED_OFF = LOW;

COROUTINE(blinkLed) {
  COROUTINE_LOOP() {
    digitalWrite(LED, LED_ON);
    COROUTINE_DELAY(100);
    digitalWrite(LED, LED_OFF);
    COROUTINE_DELAY(500);
  }
}

COROUTINE(printHelloWorld) {
  COROUTINE_LOOP() {
    Serial.print(F("Hello, "));
    Serial.flush();
    COROUTINE_DELAY(1000);
    Serial.println(F("World"));
    COROUTINE_DELAY(4000);
  }
}

COROUTINE(printProfiling) {
  COROUTINE_LOOP() {
    LogBinTableRenderer::printTo(
        Serial, 3 /*startBin*/, 14 /*endBin*/, false /*clear*/);
    LogBinJsonRenderer::printTo(
        Serial, 3 /*startBin*/, 14 /*endBin*/);

    COROUTINE_DELAY(5000);
  }
}

void setup() {
  delay(1000);
  Serial.begin(115200);
  while (!Serial); // Leonardo/Micro

  pinMode(LED, OUTPUT);
  pinMode(PIN, INPUT);

  // Coroutine names can be either C-string or F-string.
  blinkLed.setName("blinkLed");
  readPin.setName(F("readPin"));

  // Create profilers on the heap and attach them to all coroutines.
  LogBinProfiler::createProfilers();

  CoroutineScheduler::setup();
}

void loop() {
  CoroutineScheduler::loopWithProfiler();
}

The printProfiling coroutine will print the same information as before every 5 seconds:

name         <16us <32us <64us<128us<256us<512us  <1ms  <2ms  <4ms  <8ms    >>
0x1DB        16921 52650     0     0     0     0     0     0     0     0     1
readPin      65535  1189     0     0     0     0     0     0     0     0     0
blinkLed     65535   830     0     0     0     0     0     0     0     0     0
{
"0x1DB":[16921,52650,0,0,0,0,0,0,0,0,1],
"readPin":[65535,1189,0,0,0,0,0,0,0,0,0],
"blinkLed":[65535,830,0,0,0,0,0,0,0,0,0]
}

Installation

The latest stable release is available in the Arduino IDE Library Manager. Two libraries need to be installed as of v1.5.0:

Search for "AceRoutine". Click Install.
It should automatically install (or prompt you to install) the "AceCommon" library.

The development version can be installed by cloning the following git repos:

AceRoutine (https://github.com/bxparks/AceRoutine)
AceCommon (https://github.com/bxparks/AceCommon)

You can copy these directories to the ./libraries directory used by the Arduino IDE. (You should see 2 directories, named ./libraries/AceRoutine and ./libraries/AceCommon). Or you can create symlinks from /.libraries to these directories.

The develop branch contains the latest working version. The master branch contains the stable release.

Source Code

The source files are organized as follows:

src/AceRoutine.h - main header file
src/ace_routine/ - implementation files
src/ace_routine/testing/ - internal testing files
tests/ - unit tests which depend on AUnit
examples/ - example programs

Documentation

README.md - this file
Doxygen docs published on GitHub Pages
USER_GUIDE.md

Examples

The following programs are provided under the examples directory:

Beginner Examples
- HelloCoroutine.ino
- HelloScheduler.ino: same as HelloCoroutine except using the CoroutineScheduler instead of manually running the coroutines
- HelloManualCoroutine.ino: same as HelloCoroutine except the Coroutine subclasses and instances are created and registered manually
- HelloCoroutineWithProfiler.ino
- HelloSchedulerWithProfiler.ino: same as HelloCoroutineWithProfiler using CoroutineScheduler
Intermediate Examples
- BlinkSlowFastRoutine.ino: use coroutines to read a button and control how the LED blinks
- BlinkSlowFastManualRoutine.ino: same as BlinkSlowFastRoutine but using manual Coroutine subclasses
- CountAndBlink.ino: count and blink at the same time
- Delay.ino: validate the COROUTINE_DELAY() macro
Advanced Examples
- SoundManager: Use a sound manager coroutine to control the sounds made by a sound generator coroutine, using the reset() function to interrupt the sound generator.
Channels (experimental)
- Pipe.ino: uses a Channel to allow a Writer to send messages to a Reader through a "pipe" (unfinished)
- Task.ino: uses a Channel to allow a Writer to send messages to a Reade (unfinished)
- a working example of Channels can be found in the CommandLineInterface package in the AceUtils library (https://github.com/bxparks/AceUtils).
Benchmarks
- Internal programs to extract various CPU and memory benchmarks.
- AutoBenchmark.ino: performs CPU benchmarking
- MemoryBenchmark.ino: determines the flash and static memory consumptions of certain AceRoutine features
- ChannelBenchmark.ino: determines the amount of CPU overhead of a Channel by using 2 coroutines to ping-pong an integer across 2 channels

Comparisons to Other Multitasking Libraries

There are several interesting and useful multithreading libraries for Arduino. I'll divide the libraries in to 2 camps:

tasks
threads or coroutines

Task Managers

Task managers run a set of tasks. They do not provide a way to resume execution after yield() or delay().

Threads or Coroutines

In order of increasing complexity, here are some libraries that provide broader abstraction of threads or coroutines:

Littlebits coroutines
- Implemented using Duff's Device which means that nested switch statements don't work.
- The scheduler has a fixed queue size.
- The context structure is exposed.
Arduino-Scheduler
- Overrides the system's yield() for a seamless experience.
- Uses setjmp() and longjmp().
- Provides an independent stack to each coroutine whose size is configurable at runtime (defaults to 128 for AVR, 1024 for 32-bit processors).
- ESP8266 or ESP32 not supported (or at least I did not see it).
Cosa framework
- A full-featured, alternative development environment using the Arduino IDE, but not compatible with the Arduino API or libraries.
- Installs as a separate "core" using the Board Manager.
- Includes various ways of multi-tasking (Events, ProtoThreads, Threads, Coroutines).
- The <ProtoThread.h> library in the Cosa framework uses basically the same technique as this AceRoutine library.

Comparing AceRoutine to Other Libraries

The AceRoutine library falls in the "Threads or Coroutines" camp. The inspiration for this library came from ProtoThreads and Coroutines in C where an incredibly brilliant and ugly technique called Duff's Device is used to perform labeled goto statements inside the "coroutines" to resume execution from the point of the last yield() or delay(). It occurred to me that I could make the code a lot cleaner and easier to use in a number of ways:

Instead of using Duff's Device, I could use the GCC language extension called the computed goto. I would lose ANSI C compatbility, but all of the Arduino platforms (AVR, Teensy, ESP8266, ESP32) use the GCC compiler and the Arduino software already relies on GCC-specific features (e.g. flash strings using PROGMEM attribute). In return, switch statements would work inside the coroutines, which wasn't possible using the Duff's Device.
Each "coroutine" needs to keep some small number of context variables. In the C language, this needs to be passed around using a struct. It occurred to me that in C++, we could make the context variables almost disappear by making "coroutine" an instance of a class and moving the context variables into the member variables.
I could use C-processor macros similar to the ones used in AUnit to hide much of the boilerplate code and complexity from the user

I looked around to see if there already was a library that implemented these ideas and I couldn't find one. However, after writing most of this library, I discovered that my implementation was very close to the <ProtoThread.h> module in the Cosa framework. It was eerie to see how similar the 2 implementations had turned out at the lower level. I think the AceRoutine library has a couple of advantages:

it provides additional macros (i.e. COROUTINE() and EXTERN_COROUTINE()) to eliminate boilerplate code, and
it is a standalone Arduino library that does not depend on a larger framework.

Resource Consumption

Static Memory

All objects are statically allocated (i.e. not heap or stack).

On 8-bit processors (AVR Nano, Uno, etc):

sizeof(Coroutine): 16
sizeof(CoroutineScheduler): 2
sizeof(Channel<int>): 5
sizeof(LogBinProfiler): 66
sizeof(LogBinTableRenderer): 1
sizeof(LogBinJsonRenderer): 1

On 32-bit processors (e.g. Teensy ARM, ESP8266, ESP32):

sizeof(Coroutine): 28
sizeof(CoroutineScheduler): 4
sizeof(Channel<int>): 12
sizeof(LogBinProfiler): 68
sizeof(LogBinTableRenderer): 1
sizeof(LogBinJsonRenderer): 1

The CoroutineScheduler consumes only 2 bytes (8-bit processors) or 4 bytes (32-bit processors) of static memory no matter how many coroutines are created. That's because it depends on a singly-linked list whose pointers live on the Coroutine object, not in the CoroutineScheduler. But using the CoroutineScheduler::loop() instead of calling Coroutine::runCoroutine() directly increases flash memory usage by 70-100 bytes.

The Channel object requires 2 copies of the parameterized <T> type so its size is equal to 1 + 2 * sizeof(T), rounded to the nearest memory alignment boundary (i.e. a total of 12 bytes for a 32-bit processor).

Flash Memory

The examples/MemoryBenchmark program gathers flash and memory consumption numbers for various boards (AVR, ESP8266, ESP32, etc) for a handful of AceRoutine features. Here are some highlights:

Arduino Nano (8-bits)

+--------------------------------------------------------------------+
| functionality                         |  flash/  ram |       delta |
|---------------------------------------+--------------+-------------|
| Baseline                              |   1616/  186 |     0/    0 |
|---------------------------------------+--------------+-------------|
| One Delay Function                    |   1664/  188 |    48/    2 |
| Two Delay Functions                   |   1726/  190 |   110/    4 |
|---------------------------------------+--------------+-------------|
| One Coroutine (millis)                |   1804/  212 |   188/   26 |
| Two Coroutines (millis)               |   1998/  236 |   382/   50 |
|---------------------------------------+--------------+-------------|
| One Coroutine (micros)                |   1776/  212 |   160/   26 |
| Two Coroutines (micros)               |   1942/  236 |   326/   50 |
|---------------------------------------+--------------+-------------|
| One Coroutine (seconds)               |   1904/  212 |   288/   26 |
| Two Coroutines (seconds)              |   2130/  236 |   514/   50 |
|---------------------------------------+--------------+-------------|
| One Coroutine, Profiler               |   1874/  212 |   258/   26 |
| Two Coroutines, Profiler              |   2132/  236 |   516/   50 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (millis)     |   1928/  214 |   312/   28 |
| Scheduler, Two Coroutines (millis)    |   2114/  238 |   498/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (micros)     |   1900/  214 |   284/   28 |
| Scheduler, Two Coroutines (micros)    |   2058/  238 |   442/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (seconds)    |   2028/  214 |   412/   28 |
| Scheduler, Two Coroutines (seconds)   |   2246/  238 |   630/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (setup)      |   1978/  214 |   362/   28 |
| Scheduler, Two Coroutines (setup)     |   2264/  238 |   648/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (man setup)  |   1956/  214 |   340/   28 |
| Scheduler, Two Coroutines (man setup) |   2250/  238 |   634/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine, Profiler    |   1992/  214 |   376/   28 |
| Scheduler, Two Coroutines, Profiler   |   2178/  238 |   562/   52 |
|---------------------------------------+--------------+-------------|
| Scheduler, LogBinProfiler             |   2112/  286 |   496/  100 |
| Scheduler, LogBinTableRenderer        |   3514/  304 |  1898/  118 |
| Scheduler, LogBinJsonRenderer         |   3034/  308 |  1418/  122 |
|---------------------------------------+--------------+-------------|
| Blink Function                        |   1948/  189 |   332/    3 |
| Blink Coroutine                       |   2118/  212 |   502/   26 |
+--------------------------------------------------------------------+

ESP8266 (32-bits)

+--------------------------------------------------------------------+
| functionality                         |  flash/  ram |       delta |
|---------------------------------------+--------------+-------------|
| Baseline                              | 264981/27984 |     0/    0 |
|---------------------------------------+--------------+-------------|
| One Delay Function                    | 265045/27992 |    64/    8 |
| Two Delay Functions                   | 265109/27992 |   128/    8 |
|---------------------------------------+--------------+-------------|
| One Coroutine (millis)                | 265177/28028 |   196/   44 |
| Two Coroutines (millis)               | 265337/28060 |   356/   76 |
|---------------------------------------+--------------+-------------|
| One Coroutine (micros)                | 265209/28028 |   228/   44 |
| Two Coroutines (micros)               | 265369/28060 |   388/   76 |
|---------------------------------------+--------------+-------------|
| One Coroutine (seconds)               | 265209/28028 |   228/   44 |
| Two Coroutines (seconds)              | 265385/28060 |   404/   76 |
|---------------------------------------+--------------+-------------|
| One Coroutine, Profiler               | 265257/28028 |   276/   44 |
| Two Coroutines, Profiler              | 265433/28060 |   452/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (millis)     | 265241/28036 |   260/   52 |
| Scheduler, Two Coroutines (millis)    | 265385/28060 |   404/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (micros)     | 265257/28036 |   276/   52 |
| Scheduler, Two Coroutines (micros)    | 265401/28060 |   420/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (seconds)    | 265257/28036 |   276/   52 |
| Scheduler, Two Coroutines (seconds)   | 265417/28060 |   436/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (setup)      | 265273/28036 |   292/   52 |
| Scheduler, Two Coroutines (setup)     | 265433/28060 |   452/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine (man setup)  | 265257/28036 |   276/   52 |
| Scheduler, Two Coroutines (man setup) | 265433/28060 |   452/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, One Coroutine, Profiler    | 265321/28036 |   340/   52 |
| Scheduler, Two Coroutines, Profiler   | 265449/28060 |   468/   76 |
|---------------------------------------+--------------+-------------|
| Scheduler, LogBinProfiler             | 265465/28100 |   484/  116 |
| Scheduler, LogBinTableRenderer        | 267381/28100 |  2400/  116 |
| Scheduler, LogBinJsonRenderer         | 266789/28104 |  1808/  120 |
|---------------------------------------+--------------+-------------|
| Blink Function                        | 265669/28064 |   688/   80 |
| Blink Coroutine                       | 265801/28100 |   820/  116 |
+--------------------------------------------------------------------+

Comparing Blink Function and Blink Coroutine is probably the most fair comparison, because they implement the exact same functionality. The code is given in Comparison To NonBlocking Function. The Blink Function implements the asymmetric blink (HIGH and LOW having different durations) functionality using a simple, non-blocking function with an internal prevMillis static variable. The Blink Coroutine implements the same logic using a Coroutine. The Coroutine version is far more readable and maintainable, with only about 220 additional bytes of flash on AVR, and 130 bytes on an ESP8266. In many situations, the increase in flash memory size may be worth paying to get easier code maintenance.

CPU

See examples/AutoBenchmark. Here are 2 samples:

Arduino Nano:

+---------------------------------+--------+-------------+--------+
| Functionality                   |  iters | micros/iter |   diff |
|---------------------------------+--------+-------------+--------|
| EmptyLoop                       |  10000 |       1.700 |  0.000 |
|---------------------------------+--------+-------------+--------|
| DirectScheduling                |  10000 |       2.900 |  1.200 |
| DirectSchedulingWithProfiler    |  10000 |       5.700 |  4.000 |
|---------------------------------+--------+-------------+--------|
| CoroutineScheduling             |  10000 |       7.100 |  5.400 |
| CoroutineSchedulingWithProfiler |  10000 |       9.300 |  7.600 |
+---------------------------------+--------+-------------+--------+

ESP8266:

+---------------------------------+--------+-------------+--------+
| Functionality                   |  iters | micros/iter |   diff |
|---------------------------------+--------+-------------+--------|
| EmptyLoop                       |  10000 |       0.200 |  0.000 |
|---------------------------------+--------+-------------+--------|
| DirectScheduling                |  10000 |       0.500 |  0.300 |
| DirectSchedulingWithProfiler    |  10000 |       0.800 |  0.600 |
|---------------------------------+--------+-------------+--------|
| CoroutineScheduling             |  10000 |       0.900 |  0.700 |
| CoroutineSchedulingWithProfiler |  10000 |       1.100 |  0.900 |
+---------------------------------+--------+-------------+--------+

System Requirements

Hardware

Tier 1: Fully Supported

These boards are tested on each release:

Arduino Nano (16 MHz ATmega328P)
SparkFun Pro Micro (16 MHz ATmega32U4)
STM32 Blue Pill (STM32F103C8, 72 MHz ARM Cortex-M3)
NodeMCU 1.0 (ESP-12E module, 80 MHz ESP8266)
WeMos D1 Mini (ESP-12E module, 80 MHz ESP8266)
ESP32 dev board (ESP-WROOM-32 module, 240 MHz dual core Tensilica LX6)
Teensy 3.2 (96 MHz ARM Cortex-M4)

Tier 2: Should work

These boards should work, but they are not tested frequently by me, or I don't own the specific hardware so they were tested by a community member:

ATtiny85 (8 MHz ATtiny85)
Arduino Pro Mini (16 MHz ATmega328P)
Mini Mega 2560 (Arduino Mega 2560 compatible, 16 MHz ATmega2560)
Teensy LC (48 MHz ARM Cortex-M0+)
Adafruit nRF52 Boards
- Circuit Playground Bluefruit tested by a community member

Tier 3: May work, but not supported

SAMD21 M0 Mini (48 MHz ARM Cortex-M0+)
- Arduino-branded SAMD21 boards use the ArduinoCore-API, so are explicitly blacklisted. See below.
- Other 3rd party SAMD21 boards may work using the SparkFun SAMD core.
- However, as of SparkFun SAMD Core v1.8.6 and Arduino IDE 1.8.19, I can no longer upload binaries to these 3rd party boards due to errors.
- Therefore, third party SAMD21 boards are now in this new Tier 3 category.
- This library may work on these boards, but I can no longer support them.

Tier Blacklisted

The following boards are not supported and are explicitly blacklisted to allow the compiler to print useful error messages instead of hundreds of lines of compiler errors:

Any platform using the ArduinoCore-API (https://github.com/arduino/ArduinoCore-api). For example:
- Arduino Nano Every
- Arduino MKRZero
- Arduino UNO R4
- Raspberry Pi Pico RP2040

Tool Chain

This library was developed and tested using:

This library is not compatible with:

Any platform using the ArduinoCore-API, for example:

It should work with PlatformIO but I have not tested it.

The library works on Linux or MacOS (using both g++ and clang++ compilers) using the EpoxyDuino emulation layer.

Operating System

I use Ubuntu 20.04 for the vast majority of my development. I expect that the library will work fine under MacOS and Windows, but I have not explicitly tested them.

License

MIT License

Feedback and Support

If you have any questions, comments, or feature requests for this library, please use the GitHub Discussions for this project. If you have bug reports, please file a ticket in GitHub Issues. Feature requests should go into Discussions first because they often have alternative solutions which are useful to remain visible, instead of disappearing from the default view of the Issue tracker after the ticket is closed.

Please refrain from emailing me directly unless the content is sensitive. The problem with email is that I cannot reference the email conversation when other people ask similar questions later.

Authors

Created by Brian T. Park (brian@xparks.net).

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

AceRoutine

Table of Contents

Hello Coroutines

HelloCoroutine

HelloScheduler

HelloManualCoroutine

HelloCoroutineWithProfiler

HelloSchedulerWithProfiler

Installation

Source Code

Documentation

Examples

Comparisons to Other Multitasking Libraries

Task Managers

Threads or Coroutines

Comparing AceRoutine to Other Libraries

Resource Consumption

Static Memory

Flash Memory

CPU

System Requirements

Hardware

Tool Chain

Operating System

License

Feedback and Support

Authors

About

Releases 20

Packages

Contributors 3

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 512 Commits
.github/workflows		.github/workflows
docs		docs
examples		examples
src		src
tests		tests
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
DEVELOPER.md		DEVELOPER.md
LICENSE		LICENSE
README.md		README.md
USER_GUIDE.md		USER_GUIDE.md
keywords.txt		keywords.txt
library.properties		library.properties

License

bxparks/AceRoutine

Folders and files

Latest commit

History

Repository files navigation

AceRoutine

Table of Contents

Hello Coroutines

HelloCoroutine

HelloScheduler

HelloManualCoroutine

HelloCoroutineWithProfiler

HelloSchedulerWithProfiler

Installation

Source Code

Documentation

Examples

Comparisons to Other Multitasking Libraries

Task Managers

Threads or Coroutines

Comparing AceRoutine to Other Libraries

Resource Consumption

Static Memory

Flash Memory

CPU

System Requirements

Hardware

Tool Chain

Operating System

License

Feedback and Support

Authors

About

Resources

License

Stars

Watchers

Forks

Releases 20

Packages 0

Contributors 3

Languages

Packages