VerneMQ is a high-performance, distributed MQTT message broker. It scales horizontally and vertically on commodity hardware to support a high number of concurrent publishers and consumers while maintaining low latency and fault tolerance. VerneMQ is the reliable message hub for your IoT platform or smart products.
VerneMQ is an Apache2 licensed distributed MQTT broker, developed in Erlang.
docker run --name vernemq1 -d erlio/docker-vernemq
Somtimes you need to configure a forwarding for ports (on a Mac for example):
docker run -p 1883:1883 --name vernemq1 -d erlio/docker-vernemq
This starts a new node that listens on 1883 for MQTT connections and on 8080 for MQTT over websocket connections. However, at this moment the broker won't be able to authenticate the connecting clients. To allow anonymous clients use the DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on environment variable.
docker run -e "DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on" --name vernemq1 -d erlio/docker-vernemq
This allows a newly started container to automatically join a VerneMQ cluster. Assuming you started your first node like the example above you could autojoin the cluster (which currently consists of a single container 'vernemq1') like the following:
docker run -e "DOCKER_VERNEMQ_DISCOVERY_NODE=<IP-OF-VERNEMQ1>" --name vernemq2 -d erlio/docker-vernemq
(Note, you can find the IP of a docker container using docker inspect <containername/cid> | grep \"IPAddress\").
When running VerneMQ inside Kubernetes, it is possible to cause pods matching a specific label to cluster altogether automatically. This feature uses Kubernetes' API to discover other peers, and relies on the default pod service account which has to be enabled.
Simply set DOCKER_VERNEMQ_DISCOVERY_KUBERNETES=1 in your pod's environment, and expose your own pod name through MY_POD_NAME . By default, this setting will cause all pods in the same namespace with the app=vernemq label to join the same cluster. Cluster name (defaults to cluster.local), namespace and label settings can be overridden with DOCKER_VERNEMQ_KUBERNETES_CLUSTER_NAME, DOCKER_VERNEMQ_KUBERNETES_NAMESPACE and DOCKER_VERNEMQ_KUBERNETES_LABEL_SELECTOR respectively.
An example configuration of your pod's environment looks like this:
env:
- name: DOCKER_VERNEMQ_DISCOVERY_KUBERNETES
value: "1"
- name: MY_POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: DOCKER_VERNEMQ_KUBERNETES_LABEL_SELECTOR
value: "app=vernemq,release=myinstance"
When enabling Kubernetes autoclustering, don't set DOCKER_VERNEMQ_DISCOVERY_NODE.
If you encounter "SSL certification error (subject name does not match the host name)" like below, you may try to set
DOCKER_VERNEMQ_KUBERNETES_INSECUREto "1".kubectl logs vernemq-0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (51) SSL: certificate subject name 'client' does not match target host name 'kubernetes.default.svc.cluster.local' % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (51) SSL: certificate subject name 'client' does not match target host name 'kubernetes.default.svc.cluster.local' vernemq failed to start within 15 seconds, see the output of 'vernemq console' for more information. If you want to wait longer, set the environment variable WAIT_FOR_ERLANG to the number of seconds to wait. ...
To check if the bove containers have successfully clustered you can issue the vmq-admin command:
docker exec vernemq1 vmq-admin cluster show
+--------------------+-------+
| Node |Running|
+--------------------+-------+
|VerneMQ@172.17.0.151| true |
|VerneMQ@172.17.0.152| true |
+--------------------+-------+
If you started VerneMQ cluster inside Kubernetes using DOCKER_VERNEMQ_DISCOVERY_KUBERNETES=1, you can execute vmq-admin through kubectl:
kubectl exec vernemq-0 -- vmq-admin cluster show
+---------------------------------------------------+-------+
| Node |Running|
+---------------------------------------------------+-------+
|VerneMQ@vernemq-0.vernemq.default.svc.cluster.local| true |
|VerneMQ@vernemq-1.vernemq.default.svc.cluster.local| true |
+---------------------------------------------------+-------+
All vmq-admin commands are available. See https://vernemq.com/docs/administration/ for more information.
All configuration parameters that are available in vernemq.conf can be defined
using the DOCKER_VERNEMQ prefix followed by the confguration parameter name.
E.g: allow_anonymous=on is -e "DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on" or
allow_register_during_netsplit=on is
-e "DOCKER_VERNEMQ_ALLOW_REGISTER_DURING_NETSPLIT=on". All available configuration
parameters can be found on https://vernemq.com/docs/configuration/.
VerneMQ store crash and error log files in /var/log/vernemq/, and, by default,
doesn't write console log to the disk to avoid filling the container disk space.
However this behaviour can be changed by setting the environment variable DOCKER_VERNEMQ_LOG__CONSOLE to both
which tells VerneMQ to send logs to stdout and /var/log/vernemq/console.log.
For more information please see VerneMQ logging documentation: https://docs.vernemq.com/configuring-vernemq/logging
Some of our configuration variables contain dots .. For example if you want to
adjust the log level of VerneMQ you'd use -e "DOCKER_VERNEMQ_LOG.CONSOLE.LEVEL=debug". However, some container platforms
such as Kubernetes don't support dots and other special characters in
environment variables. If you are on such a platform you could substitute the
dots with two underscores __. The example above would look like -e "DOCKER_VERNEMQ_LOG__CONSOLE__LEVEL=debug".
There some some exceptions on configuration names contains dots. You can see follow examples:
| format in vernemq.conf | format in environment variable name |
|---|---|
vmq_webhooks.pool_timeout = 60000 |
DOCKER_VERNEMQ_VMQ_WEBHOOKS__POOL_timeout=6000 |
vmq_webhooks.pool_timeout = 60000 |
DOCKER_VERNEMQ_VMQ_WEBHOOKS.pool_timeout=60000 |
You can set up File Based Authentication by adding users and passwords as environment variables as follows:
DOCKER_VERNEMQ_USER_<USERNAME>='password'
where <USERNAME> is the username you want to use. This can be done as many times as necessary
to create the users you want. The usernames will always be created in lowercase
CAVEAT - You cannot have a = character in your password.