Merge pull request #546 from chipsalliance/remove-sv-plugin

Remove the SystemVerilog plugin

.github/workflows/build-and-test.sh

@@ -28,13 +28,13 @@ fi
 
 start_section Building
 
-if [ "$PLUGIN_NAME" == "xdc" ] || [ "$PLUGIN_NAME" == "sdc" ]; then 
+if [ "$PLUGIN_NAME" == "xdc" ] || [ "$PLUGIN_NAME" == "sdc" ]; then
     make design_introspection.so -j`nproc`
 	make install_design_introspection -j`nproc`
-fi 
+fi
 
 export CXXFLAGS=-Werror
-make UHDM_INSTALL_DIR=`pwd`/env/conda/envs/yosys-plugins/ ${PLUGIN_NAME}.so -j`nproc`
+make ${PLUGIN_NAME}.so -j`nproc`
 unset CXXFLAGS
 
 end_section

.github/workflows/ci.yml

@@ -35,8 +35,6 @@ jobs:
           - design_introspection
           - integrateinv
           - ql-qlf
-          - systemverilog
-          - uhdm
           - dsp-ff
 
     steps:

.github/workflows/setup.sh

@@ -47,9 +47,9 @@ end_section
 #Install yosys
 start_section Install-Yosys
 (
-    echo '================================='
-    echo 'Making env with Yosys and Surelog'
-    echo '================================='
+    echo '====================='
+    echo 'Making env with Yosys'
+    echo '====================='
     make env
     source env/conda/bin/activate yosys-plugins
     conda list

Makefile

@@ -24,7 +24,7 @@
 # TODO: pass as -D to gcc so that modules can provide e.g. --version flags.
 PLUGIN_VERSION = 1.20230906
 
-PLUGIN_LIST := fasm xdc params sdc ql-iob design_introspection integrateinv ql-qlf systemverilog uhdm dsp-ff
+PLUGIN_LIST := fasm xdc params sdc ql-iob design_introspection integrateinv ql-qlf dsp-ff
 PLUGINS := $(foreach plugin,$(PLUGIN_LIST),$(plugin).so)
 PLUGINS_INSTALL := $(foreach plugin,$(PLUGIN_LIST),install_$(plugin))
 PLUGINS_CLEAN := $(foreach plugin,$(PLUGIN_LIST),clean_$(plugin))
@@ -87,3 +87,17 @@ VERIBLE_FORMAT ?= verible-verilog-format
 .PHONY: format-verilog
 format-verilog:
 	find */tests \( -name "*.v" -o -name "*.sv" \) -and -not -path '*/third_party/*' -print0 | xargs -0 $(VERIBLE_FORMAT) --inplace
+
+# Notify that the SystemVerilog plugin has been moved
+.PHONY: systemverilog.so
+systemverilog.so:
+	$(error The SystemVerilog plugin has been moved to https://github.com/chipsalliance/systemverilog-plugin.)
+
+.PHONY: install_systemverilog
+install_systemverilog: systemverilog.so
+
+.PHONY: clean_systemverilog
+clean_systemverilog: systemverilog.so
+
+.PHONY: test_systemverilog
+test_systemverilog: systemverilog.so

README.md

@@ -99,15 +99,7 @@ The plugin adds the following commands:
 
 ## SystemVerilog plugin
 
-Reads SystemVerilog and UHDM files and processes them into yosys AST.
-
-The plugin adds the following commands:
-
-* read_systemverilog
-* read_uhdm
-
-Detailed help on the supported command(s) can be obtained by running `help <command_name>` in Yosys.
-
+The SystemVerilog plugin has been moved to [chipsalliance/systemverilog-plugin](https://github.com/chipsalliance/systemverilog-plugin).
 
 ## Clock Gating plugin
 

environment.yml

@@ -20,5 +20,4 @@ channels:
   - litex-hub
 dependencies:
   - litex-hub::yosys=0.17_7_g990c9b8e1=20220512_085338_py37
-  - litex-hub::surelog
   - litex-hub::iverilog

systemverilog-plugin/README.md

@@ -1,117 +1,3 @@
 # SystemVerilog Plugin
 
-Reads SystemVerilog and UHDM files and processes them into Yosys AST.
-
-The plugin adds the following commands:
-
-* `read_systemverilog`
-* `read_uhdm`
-
-A more detailed help on the supported commands can be obtained by running `help <command_name>` in Yosys.
-
-Please see the dedicated [integration repository](https://github.com/antmicro/yosys-uhdm-plugin-integration) which contains more information about installation and usage of this plugin.
-This repository also runs dedicated CI pipelines that perform extensive testing of this plugin.
-
-## Installation
-
-A pre-built binary can be downloaded from the [release page](https://github.com/antmicro/yosys-uhdm-plugin-integration/releases).
-The release archive contains an installation script that detects Yosys installation and installs the plugin.
-
-To build from sources please refer to the [integration repository](https://github.com/antmicro/yosys-uhdm-plugin-integration).
-
-## Usage
-
-Usage of the plugin is very simple.
-
-This paragraph describes the synthesis process given the following `counter.sv` file:
-
-```
-module top (
-  input clk,
-  output [3:0] led
-);
-  localparam BITS = 4;
-  localparam LOG2DELAY = 22;
-
-  wire bufg;
-  BUFG bufgctrl (
-      .I(clk),
-      .O(bufg)
-  );
-  reg [BITS+LOG2DELAY-1:0] counter = 0;
-  always @(posedge bufg) begin
-    counter <= counter + 1;
-  end
-  assign led[3:0] = counter >> LOG2DELAY;
-endmodule
-```
-
-To load the plugin, execute `plugin -i systemverilog`.
-Then to load SystemVerilog sources, execute `read_systemverilog`.
-The rest of the flow is exactly the same as without the plugin.
-
-To synthesize the `counter.sv` file:
-
-```
-yosys> plugin -i systemverilog
-yosys> read_systemverilog  counter.v
-1. Executing Verilog with UHDM frontend.
-[INF:CM0023] Creating log file ./slpp_all/surelog.log.
-[WRN:PA0205] counter.v:1: No timescale set for "top".
-[INF:CP0300] Compilation...
-[INF:CP0303] counter.v:1: Compile module "work@top".
-(...)
-Generating RTLIL representation for module `\top'.
-
-yosys> synth_xilinx
-
-2. Executing SYNTH_XILINX pass.
-
-(...)
-
-3.50. Printing statistics.
-
-=== top ===
-
-   Number of wires:                 10
-   Number of wire bits:            167
-   Number of public wires:           4
-   Number of public wire bits:      32
-   Number of memories:               0
-   Number of memory bits:            0
-   Number of processes:              0
-   Number of cells:                 40
-     BUFG                            1
-     CARRY4                          7
-     FDRE                           26
-     IBUF                            1
-     INV                             1
-     OBUF                            4
-
-   Estimated number of LCs:          0
-
-3.51. Executing CHECK pass (checking for obvious problems).
-Checking module top...
-Found and reported 0 problems.
-
-yosys> write_edif counter.edif
-
-4. Executing EDIF backend.
-
-```
-As a result we get a `counter.edif` file that can be further processed to get the bitstream.
-
-### Parsing multiple files
-When parsing multiple files you can either pass them together to the `read_systemverilog` command
-or read them one by one using `-defer` flag. In the latter case, you will need to call 
-`readsystemverilog -link` after processing all files to elaborate them. An example flow would
-look like below:
-```
-plugin -i systemverilog
-# Read each file separately
-read_systemverilog -defer dut.sv
-read_systemverilog -defer top.sv
-# Finish reading files, elaborate the design
-read_systemverilog -link
-# Continue Yosys flow...
-```
+The SystemVerilog plugin has been moved to [chipsalliance/systemverilog-plugin](https://github.com/chipsalliance/systemverilog-plugin).