Minor changes, testing release

conf.py

@@ -26,7 +26,7 @@
 author = 'Swedish National CryoEM Facility '
 
 # The full version, including alpha/beta/rc tags
-version = '0.0.1'
+version = '0.0.2'
 release = '0.0.0'
 
 

index.rst

@@ -20,7 +20,6 @@ Here you will find the documentation for
 
     acq/loading
     acq/session
-    acq/scipion
     acq/talos
     acq/titan
     acq/f3ec

prep/glow_discharge.rst

@@ -7,10 +7,11 @@ Glow Discharge Instructions
     Note: Taken from https://www.dropbox.com/sh/rtss2c5qblmurmf/AABqRvU3X9eIrM7wiR3a9Jg1a?dl=0&preview=GLOW+DISCHARGE+INSTRUCTIONS.pdf
     Review and Update
 
+
 PELCO easiGlow™
---------
+---------------
 
-* Switch on the machine and just click on `AUTO RUN`. The parameters that will be used are indicated in the screen. If you wish to change them just press `PROJ`and then change the parameters using the touch screen. 
+* Switch on the machine and just click on `AUTO RUN`. The parameters that will be used are indicated in the screen. If you wish to change them just press `PROJ` and then change the parameters using the touch screen.
 * Useful parameters to change are the current and the time for glow discharge. The vacuum level to be reached is set to 0.39mBar.
 * You can decide also to run one of the preset programs.
     * To run a program press `MAIN` then select `PROTOCOLS` in the touch screen, then `RUN SCREEN` and `AUTORUN`.
@@ -24,8 +25,9 @@ PELCO easiGlow™
 * When glow discharging positively using amylamine a shorter time (PROGRAM 1 or 2) is recommended. Remember to run an empty run after you used amylamine.
 * Please do not change program setting without telling me. We can always decide to change these programs, but then we need to upgrade this sheet
 
+
 Quorum GloQube® Plus
---------
+--------------------
 
 * Switch on the machine using the main power switch at the back of the machine
 * **For air glow discharge**