WAL-E is a program designed to perform continuous archiving of PostgreSQL WAL files and base backups.
To correspond on using WAL-E or to collaborate on its development, do not hesitate to send mail to the mailing list at wal-e@googlegroups.com (archives and subscription settings). Github issues are also currently being used to track known problems, so please feel free to submit those.
Table of Contents
WAL-E has these key commands:
- backup-fetch
- backup-push
- wal-fetch
- wal-push
- delete
All of these operators work in a context of several environment variables that WAL-E reads. The variables set depend on the storage provider being used, and are detailed below.
WAL-E's organizing concept is the PREFIX. Prefixes must be set
uniquely for each writing database, and prefix all objects stored
for a given database. For example: s3://bucket/databasename.
Of these, the "push" operators send backup data to storage and "fetch" operators get backup data from storage.
wal commands are called by Postgres's archive_command and
restore_command to fetch or pull write ahead log, and backup
commands are used to fetch or push a hot backup of the base database
that WAL segments can be applied to. Finally, the delete command
is used to prune the archives as to retain a finite number of backups.
- WALE_S3_PREFIX (e.g.
s3://bucket/path/optionallymorepath) - AWS_ACCESS_KEY_ID
- AWS_SECRET_ACCESS_KEY
- AWS_REGION (e.g.
us-east-1)
Optional:
- WALE_S3_ENDPOINT: See Manually specifying the S3 Endpoint
- WALE_WABS_PREFIX (e.g.
wabs://container/path/optionallymorepath) - WABS_ACCOUNT_NAME
- WABS_ACCESS_KEY
- WALE_SWIFT_PREFIX (e.g.
swift://container/path/optionallymorepath) - SWIFT_AUTHURL
- SWIFT_TENANT
- SWIFT_USER
- SWIFT_PASSWORD
Optional Variables:
- SWIFT_AUTH_VERSION which defaults to
2. Some object stores such as Softlayer require version1. - SWIFT_ENDPOINT_TYPE defaults to
publicURL, this may be set tointernalURLon object stores like Rackspace Cloud Files in order to use the internal network.
Important
Ensure that all writing servers have different _PREFIXes set. Reuse of a value between two, writing databases will likely cause unrecoverable backups.
- python (>= 2.7)
- lzop
- psql (>= 8.4)
- pv
This software also has Python dependencies: installing with pip
will attempt to resolve them:
- gevent>=1.0.2
- boto>=2.24.0
- azure>=0.7.0
- python-swiftclient>=1.8.0
- python-keystoneclient>=0.4.2
- argparse, if not on Python 2.7
It is possible to use WAL-E without the dependencies of back-end storage one does not use installed: the imports for those are only performed if the storage configuration demands their use.
Pushing a base backup to S3:
$ AWS_SECRET_ACCESS_KEY=... wal-e \ -k AWS_ACCESS_KEY_ID \ --s3-prefix=s3://some-bucket/directory/or/whatever \ backup-push /var/lib/my/database
Sending a WAL segment to WABS:
$ WABS_ACCESS_KEY=... wal-e \ -a WABS_ACCOUNT_NAME \ --wabs-prefix=wabs://some-bucket/directory/or/whatever \ wal-push /var/lib/my/database/pg_xlog/WAL_SEGMENT_LONG_HEX
Push a base backup to Swift:
$ WALE_SWIFT_PREFIX="swift://my_container_name" \ SWIFT_AUTHURL="http://my_keystone_url/v2.0/" \ SWIFT_TENANT="my_tennant" \ SWIFT_USER="my_user" \ SWIFT_PASSWORD="my_password" wal-e \ backup-push /var/lib/my/database
It is generally recommended that one use some sort of environment variable management with WAL-E: working with it this way is less verbose, less prone to error, and less likely to expose secret information in logs.
envdir, part of the daemontools package is one recommended approach to setting environment variables. One can prepare an envdir-compatible directory like so:
# Assumption: the group is trusted to read secret information # S3 Setup $ umask u=rwx,g=rx,o= $ mkdir -p /etc/wal-e.d/env $ echo "secret-key-content" > /etc/wal-e.d/env/AWS_SECRET_ACCESS_KEY $ echo "access-key" > /etc/wal-e.d/env/AWS_ACCESS_KEY_ID $ echo 's3://some-bucket/directory/or/whatever' > \ /etc/wal-e.d/env/WALE_S3_PREFIX $ chown -R root:postgres /etc/wal-e.d # Assumption: the group is trusted to read secret information # WABS Setup $ umask u=rwx,g=rx,o= $ mkdir -p /etc/wal-e.d/env $ echo "secret-key-content" > /etc/wal-e.d/env/WABS_ACCESS_KEY $ echo "access-key" > /etc/wal-e.d/env/WABS_ACCOUNT_NAME $ echo 'wabs://some-container/directory/or/whatever' > \ /etc/wal-e.d/env/WALE_WABS_PREFIX $ chown -R root:postgres /etc/wal-e.d
After having done this preparation, it is possible to run WAL-E commands much more simply, with less risk of accidentally using incorrect values:
$ envdir /etc/wal-e.d/env wal-e backup-push ... $ envdir /etc/wal-e.d/env wal-e wal-push ...
envdir is conveniently combined with the archive_command functionality
used by PostgreSQL to enable continuous archiving. To enable
continuous archiving, one needs to edit postgresql.conf and
restart the server. The important settings to enable continuous
archiving are related here:
wal_level = archive # hot_standby in 9.0 is also acceptable archive_mode = on archive_command = 'envdir /etc/wal-e.d/env wal-e wal-push %p' archive_timeout = 60
Every segment archived will be noted in the PostgreSQL log.
Warning
PostgreSQL users can check the pg_settings table and see the archive_command employed. Do not put secret information into postgresql.conf for that reason, and use envdir instead.
A base backup (via backup-push) can be uploaded at any time, but
this must be done at least once in order to perform a restoration. It
must be done again if any WAL segment was not correctly uploaded:
point in time recovery will not be able to continue if there are any
gaps in the WAL segments.
Pulling a base backup from S3:
$ sudo -u postgres bash -c \ "envdir /etc/wal-e.d/pull-env wal-e \ --s3-prefix=s3://some-bucket/directory/or/whatever \ backup-fetch /var/lib/my/database LATEST"
This command makes use of the "LATEST" pseudo-name for a backup, which queries S3 to find the latest complete backup. Otherwise, a real name can be used:
$ sudo -u postgres bash -c \ "envdir /etc/wal-e.d/pull-env wal-e \ --s3-prefix=s3://some-bucket/directory/or/whatever \ backup-fetch \ /var/lib/my/database base_LONGWALNUMBER_POSITION_NUMBER"
One can find the name of available backups via the experimental
backup-list operator, or using one's remote data store browsing
program of choice, by looking at the PREFIX/basebackups_NNN/...
directory.
It is also likely one will need to provide a recovery.conf file,
as documented in the PostgreSQL manual, to recover the base backup, as
WAL files will need to be downloaded to make the hot-backup taken with
backup-push. The WAL-E's wal-fetch subcommand is designed to be
useful for this very purpose, as it may be used in a recovery.conf
file like this:
restore_command = 'envdir /etc/wal-e.d/env wal-e wal-fetch "%f" "%p"'
Warning
If the archived database contains user defined tablespaces please review
the backup-fetch section below before utilizing that command.
backup-push, backup-fetch, wal-push, wal-fetch represent
the primary functionality of WAL-E and must reside on the database machine.
Unlike wal-push and wal-fetch commands, which function as described
above, the backup-push and backup-fetch require a little additional
explanation.
By default backup-push will include all user defined tablespaces in
the database backup. please see the backup-fetch section below for
WAL-E's tablespace restoration behavior.
There are two possible scenarios in which backup-fetch is run:
If the archived database did not contain any user defined tablespaces
at the time of backup it is safe to execute backup-fetch with no
additional work by following previous examples.
If the archived database did contain user defined tablespaces at the time of backup there are specific behaviors of WAL-E you must be aware of:
WAL-E expects that tablespace symlinks will be in place prior to a
backup-fetch run. This means prepare your target path by insuring
${PG_CLUSTER_DIRECTORY}/pg_tblspc contains all required symlinks
before restoration time. If any expected symlink does not exist
backup-fetch will fail.
If you are unable to reproduce tablespace storage structures prior to
running backup-fetch you can set the option flag --blind-restore.
This will direct WAL-E to skip the symlink verification process and place
all data directly in the ${PG_CLUSTER_DIRECTORY}/pg_tblspc path.
Optionally, you can provide a restoration specification file to WAL-E
using the backup-fetch --restore-spec RESTORE_SPEC option.
This spec must be valid JSON and contain all contained tablespaces
as well as the target storage path they require, and the symlink
postgres expects for the tablespace. Here is an example for a
cluster with a single tablespace:
{
"12345": {
"loc": "/data/postgres/tablespaces/tblspc001/",
"link": "pg_tblspc/12345"
},
"tablespaces": [
"12345"
],
}
Given this information WAL-E will create the data storage directory
and symlink it appropriately in ${PG_CLUSTER_DIRECTORY}/pg_tblspc.
Warning
"link" properties of tablespaces in the restore specification
must contain the pg_tblspc prefix, it will not be added for you.
These are commands that are not used expressly for backup or WAL
pushing and fetching, but are important to the monitoring or
maintenance of WAL-E archived databases. Unlike the critical four
operators for taking and restoring backups (backup-push,
backup-fetch, wal-push, wal-fetch) that must reside on the
database machine, these commands can be productively run from any
computer with the appropriate _PREFIX set and the necessary credentials to
manipulate or read data there.
backup-list is useful for listing base backups that are complete for a
given WAL-E context. Some fields are only filled in when the
--detail option is passed to backup-list [1].
Note
Some --detail only fields are not strictly to the right of
fields that do not require --detail be passed. This is not a
problem if one uses any CSV parsing library (as two tab-delimiters
will be emitted) to signify the empty column, but if one is hoping
to use string mangling to extract fields, exhibit care.
Firstly, the fields that are filled in regardless of if --detail
is passed or not:
| Header in CSV | Meaning |
|---|---|
| name | The name of the backup, which can be
passed to the delete and
backup-fetch commands. |
| last_modified | The date and time the backup was completed and uploaded, rendered in an ISO-compatible format with timezone information. |
| wal_segment_backup_start | The wal segment number. It is a 24-character hexadecimal number. This information identifies the timeline and relative ordering of various backups. |
| wal_segment_offset_backup_start | The offset in the WAL segment that this backup starts at. This is mostly to avoid ambiguity in event of backups that may start in the same WAL segment. |
Secondly, the fields that are filled in only when --detail is
passed:
| Header in CSV | Meaning |
|---|---|
| expanded_size_bytes | The decompressed size of the backup in bytes. |
| wal_segment_backup_stop | The last WAL segment file required to bring this backup into a consistent state, and thus available for hot-standby. |
| wal_segment_offset_backup_stop | The offset in the last WAL segment file required to bring this backup into a consistent state. |
| [1] | backup-list --detail is slower (one web
request per backup, rather than one web request per thousand
backups or so) than backup-list, and often (but not always) the
information in the regular backup-list is all one needs. |
delete contains additional subcommands that are used for deleting
data from storage for various reasons. These commands are organized
separately because the delete subcommand itself takes options that
apply to any subcommand that does deletion, such as --confirm.
All deletions are designed to be reentrant and idempotent: there are no negative consequences if one runs several deletions at once or if one resubmits the same deletion command several times, with or without canceling other deletions that may be concurrent.
These commands have a dry-run mode that is the default. The
command is basically optimized for not deleting data except in a very
specific circumstance to avoid operator error. Should a dry-run be
performed, wal-e will instead simply report every key it would
otherwise delete if it was not running in dry-run mode, along with
prominent HINT-lines for every key noting that nothing was actually
deleted from the blob store.
To actually delete any data, one must pass --confirm to wal-e
delete. If one passes both --dry-run and --confirm, a dry
run will be performed, regardless of the order of options passed.
Currently, these kinds of deletions are supported. Examples omit environment variable configuration for clarity:
before: Delete all backups and wal segment files before the given base-backup name. This does not include the base backup passed: it will remain a viable backup.Example:
$ wal-e delete [--confirm] before base_00000004000002DF000000A6_03626144
retain: Leave the given number of backups in place, and delete all base backups and wal segment files older than them.Example:
$ wal-e delete [--confirm] retain 5
old-versions: Delete all backups and wal file segments with an older format. This is only intended to be run after a major WAL-E version upgrade and the subsequent base-backup. If no base backup is successfully performed first, one is more exposed to data loss until one does perform a base backup.Example:
$ wal-e delete [--confirm] old-versions
everything: Delete all backups and wal file segments in the context. This is appropriate if one is decommissioning a database and has no need for its archives.Example:
$ wal-e delete [--confirm] everything
All assets pushed to storage are run through the program "lzop" which compresses the object using the very fast lzo compression algorithm. It takes roughly 2 CPU seconds to compress a gigabyte, which when sending things to storage at about 25MB/s occupies about 5% CPU time. Compression ratios are expected to make file sizes 50% or less of the original file size in most cases, making backups and restorations considerably faster.
Because storage services generally require the Content-Length header of a stored object to be set up-front, it is necessary to completely finish compressing an entire input file and storing the compressed output in a temporary file. Thus, the temporary file directory needs to be big enough and fast enough to support this, although this tool is designed to avoid calling fsync(), so some memory can be leveraged.
Base backups first have their files consolidated into disjoint tar files of limited length to avoid the relatively large per-file transfer overhead. This has the effect of making base backups and restores much faster when many small relations and ancillary files are involved.
To encrypt backups as well as compress them, first generate a key pair
using gpg --gen-key. You don't need the private key on the machine
to back up, but you will need it to restore. The private key may have
a password, but to restore, the password should be present in GPG
agent. WAL-E does not support entering GPG passwords via a tty device.
Once this is done, set the WALE_GPG_KEY_ID environment variable or
the --gpg-key-id command line option to the ID of the secret key
for backup and restore commands.
Here's an example of how you can restore with a private key that has a password, by forcing decryption of an arbitrary file with the correct key to unlock the GPG keychain:
# This assumes you have "keychain" gpg-agent installed. eval $( keychain --eval --agents gpg ) # If you want default gpg-agent, use this instead # eval $( gpg-agent --daemon ) # Force storing the private key password in the agent. Here you # will need to enter the key password. export TEMPFILE=`tempfile` gpg --recipient "$WALE_GPG_KEY_ID" --encrypt "$TEMPFILE" gpg --decrypt "$TEMPFILE".gpg || exit 1 rm "$TEMPFILE" "$TEMPFILE".gpg unset TEMPFILE # Now use wal-e to fetch the backup. wal-e backup-fetch [...] # If you have WAL segments encrypted, don't forget to add # restore_command to recovery.conf, e.g. # # restore_command = 'wal-e wal-fetch "%f" "%p"' # Start the restoration postgres server in a context where you have # gpg-agent's environment variables initialized, such as the current # shell. pg_ctl -D [...] start
To reduce the read load on base backups, they are sent through the
tool pv first. To use this rate-limited-read mode, use the option
--cluster-read-rate-limit as seen in wal-e backup-push.
WAL-E supports logging configuration with following environment variables:
WALE_LOG_DESTINATIONcomma separated values, syslog and stderr are supported. The default is equivalent to:syslog,stderr.WALE_SYSLOG_FACILITYfromLOCAL0toLOCAL7andUSER.
To restrict log statements to warnings and errors, use the --terse
option.
In certain situations, the wal-push process can take long enough
that it can't keep up with WAL segments being produced by Postgres,
which can lead to unbounded disk usage and an eventual crash of the
database.
One can instruct WAL-E to pool WAL segments together and send them in
groups by passing the --pool-size parameter to wal-push. This
can increase throughput significantly.
As of version 0.7.x, --pool-size defaults to 8.
Storing credentials on AWS EC2 instances has usability and security drawbacks. When using WAL-E with AWS S3 and AWS EC2, most uses of WAL-E would benefit from use with the AWS Instance Profile feature, which automatically generates and rotates credentials on behalf of an instance.
To instruct WAL-E to use these credentials for access to S3, pass the
--aws-instance-profile flag.
Instance profiles may not be preferred in more complex scenarios when one has multiple AWS IAM policies written for multiple programs run on an instance, or an existing key management infrastructure.
If one wishes to target WAL-E against an alternate S3 endpoint
(e.g. Ceph RADOS), one can set the WALE_S3_ENDPOINT environment
variable. This can also be used take fine-grained control over
endpoints and calling conventions with AWS.
The format is that of:
protocol+convention://hostname:port
Where valid protocols are http and https, and conventions are
path, virtualhost, and subdomain.
Example:
# Turns off encryption and specifies us-west-1 endpoint. WALE_S3_ENDPOINT=http+path://s3-us-west-1.amazonaws.com:80 # For radosgw. WALE_S3_ENDPOINT=http+path://hostname # As seen when using Deis, which uses radosgw. WALE_S3_ENDPOINT=http+path://deis-store-gateway:8888
Development is heavily reliant on the tool tox being existent within the development environment. All additional dependencies of WAL-E are managed by tox. In addition, the coding conventions are checked by the tox configuration included with WAL-E.
To run the tests, one need only run:
$ tox -e py27
There are a variety of other environments tested by tox handling
old and new library versions, but -e py27 is normally the
environment one should iterate with.
To run a somewhat more lengthy suite of integration tests that communicate with AWS S3, one might run tox like this:
$ WALE_S3_INTEGRATION_TESTS=TRUE \ AWS_ACCESS_KEY_ID=[AKIA...] \ AWS_SECRET_ACCESS_KEY=[...] \ WALE_WABS_INTEGRATION_TESTS=TRUE \ WABS_ACCOUNT_NAME=[...] \ WABS_ACCESS_KEY=[...] \ tox -e py27 -- -n 8
Looking carefully at the above, notice the -n 8 added the tox
invocation. This -n 8 is after a -- that indicates to tox
that the subsequent arguments are for the underlying test program
pytest.
This is to enable parallel test execution, which makes the integration tests complete a small fraction of the time it would take otherwise. It is a design requirement of new tests that parallel execution not be sacrificed.
The above invocation tests WAL-E with every test environment
defined in tox.ini. When iterating, testing all of those is
typically not a desirable use of time, so one can restrict the
integration test to one virtual environment, in a combination of
features seen in all the previous examples:
$ WALE_S3_INTEGRATION_TESTS=TRUE \ AWS_ACCESS_KEY_ID=[AKIA...] \ AWS_SECRET_ACCESS_KEY=[...] \ WALE_WABS_INTEGRATION_TESTS=TRUE \ WABS_ACCOUNT_NAME=[...] \ WABS_ACCESS_KEY=[...] \ tox -e py27 -- -n 8
Coverage testing can be used by combining any of these using
pytest-cov, e.g.: tox -- --cov wal_e and
tox -- --cov wal_e --cov-report html; see htmlcov/index.html.
Finally, the test framework used is pytest. If possible, do not submit Python unittest style tests: those tend to be more verbose and anemic in power; however, any automated testing is better than a lack thereof, so if you are familiar with unittest, do not let the preference for pytest idiom be an impediment to submitting code.