Merge branch 'main' into feature-20

* main:
  feature: Add Icon for F-Droid to Fastlane
  chore: Add Info about KUKSA CLI and Python Library
  chore: Drop ".val" suffix
  docs: Adapt Documentation as per Review Findings
  docs: Add Quickstart Guide
  feature(Build): Remove F-Droid BuildType

README.md

@@ -31,5 +31,8 @@ Find out more about KUKSA:
 - KUKSA Android SDK: https://github.com/eclipse-kuksa/kuksa-android-sdk/
 - KUKSA Companion App: https://github.com/eclipse-kuksa/kuksa-android-companion/
 
+Read our [quickstart guide](docs/QUICKSTART.md) to find out how to use the KUKSA Companion App 
+and setup it's infrastructure. 
+
 Includes digital car model by BMW AG licensed under CC-BY-4.0 
 (https://github.com/bmwcarit/digital-car-3d).

app/build.gradle.kts

@@ -71,11 +71,6 @@ android {
             )
             signingConfig = signingConfigs.getByName("release")
         }
-        // For the F-Droid store release where an unsigned artifact is needed
-        create("fDroid") {
-            initWith(getByName("release"))
-            signingConfig = null
-        }
     }
     compileOptions {
         sourceCompatibility = JavaVersion.VERSION_17

docs/CONTRIBUTING.md

@@ -1,5 +1,8 @@
 ## Getting started
 
+Read our [quickstart guide](docs/QUICKSTART.md) to find out how to use the KUKSA Companion App
+and setup it's infrastructure.
+
 ### Make Changes
 
 ### Commit Messages

docs/QUICKSTART.md

@@ -0,0 +1,133 @@
+## Introduction
+
+This guide explains on how to setup the infrastructure to use and test the KUKSA Companion App.
+
+## Requirements
+
+- Android Device with API Level >= 27 (Android 8.1)
+- a running [KUKSA DataBroker](https://github.com/eclipse/kuksa.val/tree/master/kuksa_databroker)
+- a running [Vehicle Mock Service](https://github.com/eclipse/kuksa.val.services/tree/main/mock_service) (Optional)
+
+## Setup KUKSA Databroker
+
+To use the Companion App a connection to a KUKSA Databroker is required. The 
+KUKSA Databroker might run inside a car or on your local system for testing purposes. The steps 
+to set up a local KUKSA Databroker can be found in
+the [KUKSA Quickstart Guide](https://github.com/eclipse/kuksa.val/blob/master/doc/quickstart.md)
+
+## Setup Vehicle Mock Service (Optional)
+
+This step is only required when connecting to a local running KUKSA Databroker, which is not 
+integrated into an actual vehicle.
+
+To use the Companion App the KUKSA Databroker needs to be connected to the Mock Service.
+The Mock Service simulates the interaction with the car e.g. sensors and actuators of a car. 
+The steps to set up a local instance of the Vehicle Mock Service can be found here:
+[Running mockservice](https://github.com/eclipse/kuksa.val.services/tree/main/mock_service#running-mockservice)
+
+The Mock Service needs to be run with the
+following [mock.py](https://github.com/eclipse-kuksa/kuksa-android-companion/blob/main/mock/mock.py).
+Simply replace the mock.py inside the Vehicle Mock Service repository with the one provided by this
+project to use it. 
+
+## Configure Companion App
+
+When you have access to a KUKSA Databroker, the next step is to setup the Companion App so it 
+can connect to the it.
+For this enter the "Settings" screen. The Settings screen can be found when clicking on the gear 
+icon in the Navigation Bar. Depending on your orientation the Navigation Bar can be found on top
+(portrait) or to the left (landscape) of the screen.
+
+Here you have to enter the following connection information:
+
+- Host: The host on which the KUKSA Databroker is running.
+- Port: The port on which the KUKSA Databroker is running.
+  Make sure you used the same port, when starting the KUKSA Databroker. The default value 
+  expected by the App is 55556 while the KUKSA Databroker by default starts at port 55555.
+- Enable TLS: This switch needs to be enabled, when you started your KUKSA Databroker in 
+  secure mode. Make sure you used the same mode, when starting the KUKSA Databroker.
+- Certificate: If TLS is enabled, it is mandatory to set a Certificate, which is used to establish
+  the secure connection.
+
+You can press the "refresh"-button, to start a new connection cycle. The "refresh"-button is the 
+self-referencing arrow in the Connection Status Bar. Depending on your connection status the
+Connection Status Bar is colored red if no connection could be established or green if you are 
+successfully connected to the KUKSA Databroker.
+
+## FAQ
+
+### Can't connect to KUKSA Databroker from Android Emulator
+
+When the App is run from an Android Emulator and the host device is running the 
+KUKSA Databroker. The host to be used is `10.0.2.2`. This is the internal loopback address of 
+the host device. See the [android documentation](https://developer.android.com/studio/run/emulator-networking) 
+for further details
+
+### I can't connect to the KUKSA Databroker from my mobile device. I am using a Proxy.
+
+The Proxy might prevent communication between the mobile device and the host device. Therefore even
+though the host device is running the KUKSA Databroker just fine, it is not possible for the 
+mobile device to connect to it.
+
+This can be solved by
+a) using an Android Emulator
+b) setting up a reverse port forwarding using adb
+`adb reverse tcp:55556 tcp:55556`
+This forwards all data from the host device port 55556 to the mobile device port 55556.
+The host to be used is `localhost:55556` in this case.
+
+Reverse port forwarding requires host device and mobile device to be connected using usb,
+usb debugging to be enabled on the mobile device and adb to be accessible on the host device.
+
+## Which Signals are used inside the Companion App?
+
+The KUKSA Companion App is based on version 4.0 of the Vehicle Signal Specification.
+
+It uses only a small portion of the Signals specified by the Vehicle Signal Specification for
+it's show case.
+
+Here is a list of signals which are used inside the app:
+
+Door Control:
+- Vehicle.Cabin.Door.Row1.DriverSide.IsLocked
+- Vehicle.Cabin.Door.Row1.PassengerSide.IsLocked
+- Vehicle.Cabin.Door.Row2.DriverSide.IsLocked
+- Vehicle.Cabin.Door.Row2.PassengerSide.IsLocked
+- Vehicle.Body.Trunk.Rear.IsLocked
+- Vehicle.Cabin.Door.Row1.DriverSide.IsOpen
+- Vehicle.Cabin.Door.Row1.PassengerSide.IsOpen
+- Vehicle.Cabin.Door.Row2.DriverSide.IsOpen
+- Vehicle.Cabin.Door.Row2.PassengerSide.IsOpen
+- Vehicle.Body.Trunk.Rear.IsOpen
+
+Temperature Control:
+- Vehicle.Cabin.HVAC.Station.Row1.Driver.Temperature
+- Vehicle.Cabin.HVAC.Station.Row1.Passenger.Temperature
+- Vehicle.Cabin.HVAC.Station.Row2.Driver.Temperature
+- Vehicle.Cabin.HVAC.Station.Row2.Passenger.Temperature
+
+Light Control:
+- Vehicle.Body.Lights.Beam.High.IsOn
+- Vehicle.Body.Lights.Beam.Low.IsOn
+- Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling
+- Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling
+- Vehicle.Body.Lights.Fog.Front.IsOn
+- Vehicle.Body.Lights.Fog.Rear.IsOn
+- Vehicle.Body.Lights.Hazard.IsSignaling
+- Vehicle.Body.Lights.Parking.IsOn
+- Vehicle.Body.Lights.Running.IsOn
+
+Tire Pressure:
+- Vehicle.Chassis.Axle.Row1.Wheel.Left.Tire.Pressure
+- Vehicle.Chassis.Axle.Row1.Wheel.Right.Tire.Pressure
+- Vehicle.Chassis.Axle.Row2.Wheel.Left.Tire.Pressure
+- Vehicle.Chassis.Axle.Row2.Wheel.Right.Tire.Pressure
+
+You can find more information about the signals used inside the app or other existing signals
+[here](https://covesa.github.io/vehicle_signal_specification/).
+
+## Are there alternate ways to change the data of a VSS path?
+
+You can change the data of an underlying VSS path manually by using the
+- [KUKSA CLI](https://github.com/eclipse/kuksa.val/blob/master/doc/quickstart.md#reading-and-writing-vss-data-via-cli)
+- [KUKSA Python Library](https://github.com/eclipse/kuksa.val/blob/master/doc/quickstart.md#reading-and-writing-vss-data-with-code)