Skip to content

elehobica/pico_st7735_80x160

Repository files navigation

ST7735 Test waveshare_rp2040_lcd_096

Raspberry Pi Pico ST7735 80x160 LCD Library

Overview

ST7735 80x160 LCD display library for Raspberry Pi Pico

This project supports:

  • ST7735 80x160 LCD
  • Backlight control by PWM

Supported Board

  • Raspberry Pi Pico
  • ST7735S 80x160 LCD
  • Waveshare RP2040-LCD-0.96 Board (ST7735S 80x160 LCD build-in)

Pin Assignment

ST7735S 80x160 LCD (Raspberry Pi Pico Board)

Pico Pin # Pin Name Function ST7735S 80x160 Board
12 GP9 GPIO BLK
14 GP10 SPI1_SCK SCL
15 GP11 SPI1_TX SDA
17 GP13 SPI1_CSn CS
19 GP14 GPIO DC
20 GP15 GPIO RES
18 GND GND GND
36 3V3(OUT) 3.3V VCC

ST7735S_schematic

ST7735S 80x160 LCD (Waveshare RP2040-LCD-0.96 Board)

Uncomment #define BOARD_WAVESHARE_RP2040_LCD_096 in lcd.h

Pin # Pin Name Function Signal Name
11 GP8 GPIO DC
12 GP9 SPI1_CSn CS
14 GP10 SPI1_SCK SCL
15 GP11 SPI1_TX DIN
16 GP12 GPIO RST
-- GP25 GPIO BL

Serial (CP2102 module)

Pico Pin # Pin Name Function CP2102 module
1 GP0 UART0_TX RXD
2 GP1 UART0_RX TXD
3 GND GND GND

How to build

  • See "Getting started with Raspberry Pi Pico"
  • Put "pico-sdk", "pico-examples" and "pico-extras" on the same level with this project folder.
  • Set environmental variables for PICO_SDK_PATH, PICO_EXTRAS_PATH and PICO_EXAMPLES_PATH
  • Confirmed with Pico SDK 2.0.0
> git clone -b 2.0.0 https://github.com/raspberrypi/pico-sdk.git
> cd pico-sdk
> git submodule update -i
> cd ..
> git clone -b sdk-2.0.0 https://github.com/raspberrypi/pico-examples.git
>
> git clone -b sdk-2.0.0 https://github.com/raspberrypi/pico-extras.git
>
> git clone -b main https://github.com/elehobica/pico_st7735_80x160.git

Windows

  • Build is confirmed with Developer Command Prompt for VS 2022 and Visual Studio Code on Windows environment
  • Confirmed with cmake-3.27.2-windows-x86_64 and gcc-arm-none-eabi-10.3-2021.10-win32
  • Lanuch "Developer Command Prompt for VS 2022"
> cd pico_st7735_80x160\test
> mkdir build && cd build
> cmake -G "NMake Makefiles" ..
> nmake
  • Put "pico_st7735_80x160.uf2" on RPI-RP2 drive

Linux

$ cd pico_st7735_80x160/test
$ mkdir build && cd build
$ cmake ..
$ make -j4
  • Download "pico_st7735_80x160.uf2" on RPI-RP2 drive

Configuration

Configure library settings by LCD_Config() with pico_st7735_80x160_config_t

pico_st7735_80x160_config_t lcd_cfg = {
    SPI_CLK_FREQ_DEFAULT,
    spi1,
    PIN_LCD_SPI1_CS_DEFAULT,
    PIN_LCD_SPI1_SCK_DEFAULT,
    PIN_LCD_SPI1_MOSI_DEFAULT,
    PIN_LCD_DC_DEFAULT,
    PIN_LCD_RST_DEFAULT,
    PIN_LCD_BLK_DEFAULT,
    INVERSION_DEFAULT,  // 0: non-color-inversion, 1: color-inversion
    RGB_ORDER_DEFAULT,  // 0: RGB, 1: BGR
    ROTATION_DEFAULT,
    H_OFS_DEFAULT,
    V_OFS_DEFAULT,
    X_MIRROR_DEFAULT
};
LCD_Config(&lcd_cfg);

Backlight Control from Serial Terminal

When scrolling text display appears at demo final, program accepts Serial Terminal control.

  • '+' to increase backlight level
  • '-' to decrease backlight level
  • 'r' to repeat demo

Application Example