decomp-toolkit

Yet another GameCube/Wii decompilation toolkit.

decomp-toolkit functions both as a command-line tool for developers, and as a replacement for various parts of a decompilation project's build system.

For use in a new decompilation project, see dtk-template, which provides a project structure and build system that uses decomp-toolkit under the hood.

Sections

• Goals
• Background
• Analyzer features
• Other approaches
• Terminology
• Commands
  • ar create
  • ar extract
  • demangle
  • disc info
  • disc extract
  • disc convert
  • disc verify
  • dol info
  • dol split
  • dol diff
  • dol apply
  • dol config
  • dwarf dump
  • elf disasm
  • elf fixup
  • elf2dol
  • map
  • rel info
  • rel merge
  • rso info
  • rso make
  • shasum
  • nlzss decompress
  • rarc list
  • rarc extract
  • u8 list
  • u8 extract
  • vfs ls
  • vfs cp
  • yay0 decompress
  • yay0 compress
  • yaz0 decompress
  • yaz0 compress
  • wad info
  • wad extract
  • wad verify

Goals

• Automate as much as possible, allowing developers to focus on matching code rather than months-long tedious setup.
• Provide highly accurate and performant analysis and tooling.
• Provide everything in a single portable binary. This simplifies project setup: a script can simply fetch the binary from GitHub.
• Replace common usages of msys2 and GNU assembler, eliminating the need to depend on devkitPro.
• Integrate well with other decompilation tooling like objdiff and decomp.me.

Background

The goal of a matching decompilation project is to write C/C++ code that compiles back to the exact same binary as the original game. This often requires using the same compiler as the original game. (For GameCube and Wii, Metrowerks CodeWarrior)

When compiling C/C++ code, the compiler (in our case, mwcceppc) generates an object file (.o) for every source file. This object file contains the compiled machine code, as well as information that the linker (mwldeppc) uses to generate the final executable.

One way to verify that our code is a match is by taking any code that has been decompiled, and linking it alongside portions of the original binary that have not been decompiled yet. First, we create relocatable objects from the original binary:

(Heavily simplified)

Then, each object can be replaced by a decompiled version as matching code is written. If the linker still generates a binary that is byte-for-byte identical to the original, then we know that the decompiled code is a match.

decomp-toolkit provides tooling for analyzing and splitting the original binary into relocatable objects, as well as generating the linker script and other files needed to link the decompiled code.

Analyzer features

Function boundary analysis
Discovers function boundaries with high accuracy. Uses various heuristics to disambiguate tail calls from inner-function control flow.

Signature analysis
Utilizes a built-in signature database to identify common Metrowerks and SDK functions and objects.
This also helps decomp-toolkit automatically generate required splits, like __init_cpp_exceptions.

Relocation analysis
Performs control-flow analysis and rebuilds relocations with high accuracy.
With some manual tweaking (mainly in data), this should generate fully-shiftable objects.

Section analysis
Automatically identifies DOL and REL sections based on information from signature and relocation analysis.

Object analysis
Attempts to identify the type and size of data objects by analyzing usage.
Also attempts to identify string literals, wide string literals, and string tables.

Splitting
Generates split object files in memory based on user configuration.
In order to support relinking with mwldeppc.exe, any unsplit .ctors, .dtors, extab and extabindex entries are analyzed and automatically split along with their associated functions. This ensures that the linker will properly generate these sections without any additional configuration.
A topological sort is performed to determine the final link order of the split objects.

Object file writing
Writes object files directly, with no assembler required. (Bye devkitPPC!)
If desired, optionally writes GNU assembler-compatible files alongside the object files.

Linker script generation
Generates ldscript.lcf for mwldeppc.exe.

Commands

ar create

Create a static library (.a) from the input objects.

$ dtk ar create out.a input_1.o input_2.o
# or
$ echo input_1.o >> rspfile
$ echo input_2.o >> rspfile
$ dtk ar create out.a @rspfile

ar extract

Extracts the contents of static library (.a) files.

Accepts multiple files, glob patterns (e.g. *.a) and response files (e.g. @rspfile).

Options:

• -o, --out <output-dir>: Output directory. Defaults to the current directory.
• -v, --verbose: Verbose output.
• -q, --quiet: Suppresses all output except errors.

# Extracts to outdir
$ dtk ar extract lib.a -o outdir

# With multiple inputs, extracts to separate directories
# Extracts to outdir/lib1, outdir/lib2
$ dtk ar extract lib1.a lib2.a -o outdir

demangle

Demangles CodeWarrior C++ symbols. A thin wrapper for cwdemangle.

$ dtk demangle 'BuildLight__9CGuiLightCFv'
CGuiLight::BuildLight() const

disc info

disc commands are wrappers around the nod library and its nodtool command line tool.

Displays information about disc images.

To list the contents of a disc image, use vfs ls.

Supported disc image formats:

• ISO (GCM)
• WIA / RVZ
• WBFS (+ NKit 2 lossless)
• CISO (+ NKit 2 lossless)
• NFS (Wii U VC)
• GCZ
• TGC

$ dtk disc info /path/to/game.iso

disc extract

Extracts the contents of disc images to a directory.

See disc info for supported formats.

Note

vfs cp is more flexible and supports disc images.

$ dtk disc extract /path/to/game.iso [outdir]

By default, only the main data partition is extracted.
Use the -p/--partition option to choose a different partition.
(Options: all, data, update, channel, or a partition index)

disc convert

Converts any supported disc image to raw ISO (GCM).

If the format is lossless, the output will be identical to the original disc image.

See disc info for supported formats.

$ dtk disc convert /path/to/game.wia /path/to/game.iso

disc verify

Hashes the contents of a disc image and verifies it against a built-in Redump database.

See disc info for supported formats.

$ dtk disc verify /path/to/game.iso

dol info

Analyzes a DOL file and outputs information section and symbol information.

See vfs ls for information on the VFS abstraction.

$ dtk dol info input.dol
# or, directly from a disc image
$ dtk dol info 'disc.rvz:sys/main.dol'

dol split

Important

This command is intended to be used as part of a decompilation project's build system.
For an example project structure and for documentation on the configuration, see dtk-template.

Analyzes and splits a DOL file into relocatable objects based on user configuration.

$ dtk dol split config.yml target

dol diff

Simple diff tool for issues in a linked ELF. (Yes, not DOL. It's misnamed.)
Tries to find the most obvious difference causing a mismatch.

Pass in the project configuration file, and the path to the linked ELF file to compare against.

$ dtk dol diff config.yml build/main.elf

dol apply

Applies updated symbols from a linked ELF to the project configuration. (Again, misnamed.)

Useful after matching a file. It will pull updated symbol information from the final result.

$ dtk dol apply config.yml build/main.elf

dol config

Generates an initial project configuration file from a DOL (& RELs).

Pass in the DOL file, and any REL files that are linked with it.
Or, for Wii games, pass in the selfile.sel. (Not RSOs)

$ dtk dol config main.dol rels/*.rel -o config.yml

dwarf dump

Dumps DWARF 1.1 information from an ELF file. (Does not support DWARF 2+)

$ dtk dwarf dump input.elf

elf disasm

Disassemble an unstripped CodeWarrior ELF file. Attempts to automatically split objects and rebuild relocations when possible.

$ dtk elf disasm input.elf out

elf fixup

Fixes issues with GNU assembler-built objects to ensure compatibility with mwldeppc.exe.

• Strips empty sections
• Generates section symbols for all allocatable sections
• Where possible, replaces section-relative relocations with direct relocations.
• Adds an (asm) suffix to the file symbol. (For matching progress calculation)

# input and output can be the same
$ dtk elf fixup file.o file.o

elf2dol

Creates a DOL file from the provided ELF file.

$ dtk elf2dol input.elf output.dol
# or, to ignore certain sections
$ dtk elf2dol input.elf output.dol --ignore debug_section1 --ignore debug_section2

map

Processes CodeWarrior map files and provides information about symbols and TUs.

$ dtk map entries Game.MAP 'Unit.o'
# Outputs all symbols that are referenced by Unit.o
# This is useful for finding deduplicated weak functions,
# which only show on first use in the link map.

$ dtk map symbol Game.MAP 'Function__5ClassFv'
# Outputs reference information for Function__5ClassFv
# CodeWarrior link maps can get very deeply nested,
# so this is useful for emitting direct references
# in a readable format.

rel info

Prints information about a REL file.

See vfs ls for information on the VFS abstraction.

$ dtk rel info input.rel
# or, directly from a disc image
$ dtk rel info 'disc.rvz:files/RELS.arc:amem/d_a_tag_so.rel'

rel merge

Merges a DOL file and associated RELs into a single ELF file, suitable for analysis in your favorite reverse engineering software.

$ dtk rel info main.dol rels/*.rel -o merged.elf

rso info

Warning

This command is not yet functional.

Prints information about an RSO file.

$ dtk rso info input.rso

rso make

Warning

This command does not yet support creating SEL files.

Creates an RSO file from a relocatable ELF file.

Options:

• -o, --output <File>: Output RSO file.
• -m, --module-name <Name>: Module name (or path). Default: input name
• -e, --export <File>: File containing exported symbol names. (Newline separated)

$ dtk rso make input.elf -o input.rso

shasum

Calculate and verify SHA-1 hashes.

$ dtk shasum baserom.dol
949c5ed7368aef547e0b0db1c3678f466e2afbff  baserom.dol

$ dtk shasum -c baserom.sha1 
baserom.dol: OK

nlzss decompress

Decompresses NLZSS-compressed files.

$ dtk nlzss decompress input.bin.lz -o output.bin
# or, for batch processing
$ dtk nlzss decompress rels/*.lz -o rels

rarc list

Note

vfs ls is more flexible and supports RARC archives.
This command is now equivalent to dtk vfs ls -r input.arc:

Lists the contents of an RARC (older .arc) archive.

$ dtk rarc list input.arc

rarc extract

Note

vfs cp is more flexible and supports RARC archives.
This command is now equivalent to dtk vfs cp input.arc: output_dir

Extracts the contents of an RARC (older .arc) archive.

$ dtk rarc extract input.arc -o output_dir

u8 list

Note

vfs ls is more flexible and supports U8 archives.
This command is now equivalent to dtk vfs ls -r input.arc:

Extracts the contents of a U8 (newer .arc) archive.

$ dtk u8 list input.arc

u8 extract

Note

vfs cp is more flexible and supports U8 archives.
This command is now equivalent to dtk vfs cp input.arc: output_dir

Extracts the contents of a U8 (newer .arc) archive.

$ dtk u8 extract input.arc -o output_dir

vfs ls

decomp-toolkit has a powerful virtual filesystem (VFS) abstraction that allows you to work with a variety of containers. All operations happen in memory with minimal overhead and no temporary files.

Supported containers:

• Disc images (see disc info for supported formats)
• RARC archives (older .arc)
• U8 archives (newer .arc)
• WAD files (Wii VC)

Supported compression formats are handled transparently:

• Yay0 (SZP) / Yaz0 (SZS)
• NLZSS (.lz) (Use :nlzss in the path)

vfs ls lists the contents of a container or directory.

Options:

• -r, --recursive: Recursively list contents.
• -s, --short: Only list file names.

Examples:

# List the contents of the `amem` directory inside `RELS.arc` in a disc image
$ dtk vfs ls 'disc.rvz:files/RELS.arc:amem'
# List the contents of `RELS.arc` recursively
$ dtk vfs ls -r 'disc.rvz:files/RELS.arc:'

# All commands that accept a file path can also accept a VFS path
$ dtk rel info 'disc.rvz:files/RELS.arc:amem/d_a_tag_so.rel'
# Example disc image within a disc image
$ dtk dol info 'disc.rvz:files/zz_demo.tgc:sys/main.dol'

vfs cp

See vfs ls for information on the VFS abstraction.

vfs cp copies files and directories recursively to the host filesystem.

Options:

• --no-decompress: Do not decompress files when copying.
• -q, --quiet: Suppresses all output except errors.

Examples:

# Extract a file from a nested path in a disc image to the current directory
$ dtk vfs cp 'disc.rvz:files/RELS.arc:amem/d_a_tag_so.rel' .

# Directories are copied recursively, making it easy to extract entire archives
$ dtk vfs cp 'disc.rvz:files/RELS.arc:' rels
# Or, to disable automatic decompression
$ dtk vfs cp --no-decompress 'disc.rvz:files/RELS.arc:' rels

yay0 decompress

Decompresses Yay0-compressed files.

$ dtk yay0 decompress input.bin.yay0 -o output.bin
# or, for batch processing
$ dtk yay0 decompress rels/*.yay0 -o rels

yay0 compress

Compresses files using Yay0 compression.

$ dtk yay0 compress input.bin -o output.bin.yay0
# or, for batch processing
$ dtk yay0 compress rels/* -o rels

yaz0 decompress

Decompresses Yaz0-compressed files.

$ dtk yaz0 decompress input.bin.yaz0 -o output.bin
# or, for batch processing
$ dtk yaz0 decompress rels/*.yaz0 -o rels

yaz0 compress

Compresses files using Yaz0 compression.

$ dtk yaz0 compress input.bin -o output.bin.yaz0
# or, for batch processing
$ dtk yaz0 compress rels/* -o rels

wad info

Prints information about a WAD file.

$ dtk wad info input.wad

wad extract

Note

vfs cp is more flexible and supports WAD files.
This command is now equivalent to dtk vfs cp input.wad: output_dir

Extracts the contents of a WAD file.

$ dtk wad extract input.wad -o output_dir

wad verify

Verifies the contents of a WAD file.

$ dtk wad verify input.wad