Skip to content

RoboRock vacuum robot service which allows playing different voice-lines each time they are played.

Notifications You must be signed in to change notification settings

erkexzcx/rrmultivoice

Repository files navigation

rrmultivoice

Binary downloads

This service grants ability for RockRobo vacuum robot to have different voice-lines each time it says something.

Ever get bored of hearing starting to clean? Well, what if you hear these, each time a different voice line?

  • Starting to clean. Or as I like to call it, the eternal punishment.
  • Starting to clean. Can't wait.
  • Starting to clean. Again, and again, and again.
  • Starting to clean. Again. Your personal maid is at your service.
  • Starting to clean. Another day, another disaster to tidy up.

This project makes it possible!

Get started

Verifying compatibility

SSH access

First thing first - your RockRobo must be rooted. You must be able to access it via ssh.

Process name

There is a process on your robot vacuum that plays those sounds. Play the sound (e.g. "locate robot" action) and issue this command while audio is playing:

[root@rockrobo data]# lsof | grep -i wav
533     /opt/rockrobo/cleaner/bin/RoboController        /opt/rockrobo/resources/sounds/en/findme.wav

Great, you found it. It's called RoboController. If this is different for you - please raise an issue.

Sounds location

From the previous step, you've found the location of the sounds (/opt/rockrobo/resources/sounds/en/) as well as process name.

Available storage

Using below command you can check how much space you have in your robot vacuum:

[root@rockrobo data]# df -h /opt/rockrobo/resources/sounds/en/
Filesystem                Size      Used Available Use% Mounted on
rootfs                  493.9M    200.4M    268.0M  43% /

From this output you can see that the sounds are using / mountpoint, which has 493.9M total storage and 268.0M available. Great, because your uploaded files will need to be within the same partition as the sounds directory.

With workaround it's possible to use different partition, but more on that later.

Get audio files

You can use my provided sound packs additional_sounds.tar.gz from this repo. Alternatively, your next best choice is to generate them yourself. See my other project https://github.com/erkexzcx/rrvoicegen.

Upload audio files

Note about hard links

Why hard links?

This application swaps hard links to original sounds locations. It monitors the process that plays these sounds and once sound has been played - it immediatelly swaps it with a other one, so next time it is played - you will hear a different voice line. Using hard links is basically a way to save space and avoid creating a file copy.

Explanation of what is hard link:

A hard link is a reference or pointer to a file's physical location on a disk, similar to a shortcut, but within the file system itself. Unlike a shortcut, a hard link is indistinguishable from the original file and has the same inode (the data structure in a Unix-style file system that describes a filesystem object such as a file or a directory). This means that even if you delete the original file, the hard link will still contain the file's data.

Hard link limitation:

A hard link is a direct reference to the physical data on the disk and it must be on the same partition or disk as the original file. This is because hard links are essentially pointers to the same inode (data block) on the disk where the original file data is stored. If you attempt to create a hard link across different partitions or disks, it would fail because each partition or disk maintains its own set of inodes.

Which means you have 2 options here:

Option 1: Use as is (the rest of example is based on this method), considering empty space of / partition (where /opt/rockrobo/resources/sounds/en/ is located).

Option 2: If you need more storage, maybe you can find another partition, such as mountpoint /mnt/data. In this case, you should delete everything from en folder, create (for example) /mnt/data/rrmultivoice/en dir and mount it to /opt/rockrobo/resources/sounds/en using mount --bind command as well as appropriate /etc/fstab entry (to mount on boot). Note that I have not tried this method, so you are on your own.

Delete existing files

SSH to the vacuum robot and delete (or backup somewhere) original audio files:

rm -rf /opt/rockrobo/resources/sounds/en/*

Upload multiple folders of sounds

Now create a new directory in there:

mkdir /opt/rockrobo/resources/sounds/en/additional_sounds

Now upload your voice-lines packs (folders) to that folder. Here is the command that I used to upload all folders from additional_sounds on my PC to vacuum robot at /opt/rockrobo/resources/sounds/en/additional_sounds/:

scp -r -O additional_sounds/* 123.123.123.123:/opt/rockrobo/resources/sounds/en/additional_sounds/

Here is how I can verify if things are in place:

[root@rockrobo ]# cd /opt/rockrobo/resources/sounds/en
[root@rockrobo en]# ls -l | grep -v .wav
drwxr-xr-x    7 root     root          1024 Oct 15 17:47 additional_sounds
[root@rockrobo en]# ls -l additional_sounds | grep -v .wav
drwxr-xr-x    2 root     root          4096 Oct 15 17:43 custom1
drwxr-xr-x    2 root     root          5120 Oct 15 17:44 custom2
drwxr-xr-x    2 root     root          4096 Oct 15 17:44 custom3
drwxr-xr-x    2 root     root          5120 Oct 15 17:44 custom4
drwxr-xr-x    2 root     root          4096 Oct 15 17:44 custom5

Populate with hard links

So the last missing thing is that the /opt/rockrobo/resources/sounds/en/ directory contains no sounds. We need to populate it with initial sounds by using hard links. Note that soft links do not work (audio files are not being played).

Let's say one of the sound packs (folders) you have is this: /opt/rockrobo/resources/sounds/en/additional_sounds/custom1

In this case, run below command:

find /opt/rockrobo/resources/sounds/en/additional_sounds/custom1 -type f -exec ln {} /opt/rockrobo/resources/sounds/en/ \;

Now your /opt/rockrobo/resources/sounds/en/ is populated with files that robot can play.

Test if service works

SSH to your robot vacuum and inspect CPU architecture. In my case it's armv7:

[root@rockrobo ]# cat /proc/cpuinfo | grep Processor
Processor       : ARMv7 Processor rev 5 (v7l)

Since now you know the architecture, you can download an appropriate binary for your robot CPU from here: https://github.com/erkexzcx/rrmultivoice/releases/latest

Recommended place to put binary file is /mnt/data/rrmultivoice.

Before you try, understand command line arguments and their default values (if not specified):

[root@rockrobo ]# /mnt/data/rrmultivoice -help
Usage of /mnt/data/rrmultivoice:
  -interval duration
        Interval for scanning fds. (default 300ms)
  -packsdir string
        Directory of additional sound directories (default "/opt/rockrobo/resources/sounds/en/additional_sounds")
  -soundsdir string
        Original directory from which robot plays voice-lines. (default "/opt/rockrobo/resources/sounds/en/")

Note about -interval - this service scans RoboController process for opened files. If one of those opened files is /opt/rockrobo/resources/sounds/en/ - it updates hard link. So basically it's polling interval. The whole check takes about 1-2ms, so setting it to something very low (e.g. 20ms) should be fine. However, I suggest keeping it default.

Now you can test the service to see if it works like this:

[root@rockrobo ]# /mnt/data/rrmultivoice
2023/10/15 20:15:13 Found RoboController PID: 533
2023/10/15 20:15:16 Replacing file: start.wav
2023/10/15 20:15:24 Replacing file: stop_clean.wav
2023/10/15 20:15:25 Replacing file: charging.wav

Try to spam some commands, such as start cleaning or go back to the dock multiple times. Each time it should say something different (depending on what voice-lines packs (dirs) you supplied it). It means everything is works and the remaining part - set it to start on boot.

Start on boot

I am not certainly sure about this procedure, so I will cover only what worked for me. For better guidance and for different models - you should check out another repo that contains instructions on how to start binary on boot: https://github.com/porech/roborock-oucher

I have RoboRock S5 and for me, using /etc/init folder to put shell scripts works. I've created a file /etc/init/S12rrmultivoice file with the following contents:

#!/bin/sh

load() {
    curtime=`cat /proc/uptime | awk -F ' ' '{print $1}'`
    echo "[$curtime] start rrmultivoice"
    start-stop-daemon -S -b -q -m -p /var/run/rrmultivoice.pid -x /mnt/data/rrmultivoice
}

unload() {
    echo "Stopping rrmultivoice" >/dev/kmsg
    start-stop-daemon -K -q -p /var/run/rrmultivoice.pid
}

case "$1" in
    start)
        load
        ;;
    stop)
        unload
        ;;
    restart)
        unload
        load
        ;;
    *)
        echo "$0 <start/stop/restart>"
        ;;
esac

And lastly do a chmod +x /etc/init/S12rrmultivoice. Now reboot and test if voice-lines are changing.

Note that I am not quite sure how should I pass command-line arguments for this, but I never needed to.

About

RoboRock vacuum robot service which allows playing different voice-lines each time they are played.

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages