Fixes #3837 #1466
build.yml
on: pull_request
verify-linting
26s
Check that solution can be restored
26s
build-typescript
2m 16s
build-integration
2m 52s
build-standalone
4m 55s
build-dart
1m 56s
analyzers
5m 46s
Matrix: build-javascript
Matrix: build-python
Matrix: build-rust
Annotations
243 warnings
Check that solution can be restored
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/setup-dotnet@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
verify-linting
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/setup-dotnet@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-dart
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-dart
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-dart:
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-typescript
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-typescript:
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (ubuntu-latest, 3.12)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.12):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (ubuntu-latest, 3.12):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (ubuntu-latest, 3.12):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (ubuntu-latest, 3.12):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (ubuntu-latest, 3.12):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (ubuntu-latest, 3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (ubuntu-latest, 3.11)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.11):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (ubuntu-latest, 3.11):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (ubuntu-latest, 3.11):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (ubuntu-latest, 3.11):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (ubuntu-latest, 3.11):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (ubuntu-latest, 3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (ubuntu-latest, 3.10)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (ubuntu-latest, 3.10):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (ubuntu-latest, 3.10):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (ubuntu-latest, 3.10):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (ubuntu-latest, 3.10):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (ubuntu-latest, 3.10):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (ubuntu-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-integration
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-integration:
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-rust (no_std)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-rust (no_std):
tests/Rust/tests/src/ApplicativeTests.fs#L1730
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-rust (no_std):
tests/Rust/tests/src/MiscTests.fs#L1206
This rule will never be matched
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (no_std)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (no_std)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (no_std)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (no_std)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (default)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-rust (default)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (default)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (default)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (default)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (default)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (default):
tests/Rust/tests/src/ApplicativeTests.fs#L1730
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-rust (default):
tests/Rust/tests/src/MiscTests.fs#L1206
This rule will never be matched
|
build-javascript (ubuntu-latest)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-javascript (ubuntu-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (ubuntu-latest):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (windows-latest, 3.12)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.12):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (windows-latest, 3.12):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (windows-latest, 3.12):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (windows-latest, 3.12):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (windows-latest, 3.12):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (windows-latest, 3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (windows-latest, 3.10)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.10):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (windows-latest, 3.10):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (windows-latest, 3.10):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (windows-latest, 3.10):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (windows-latest, 3.10):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (windows-latest, 3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-python (windows-latest, 3.11)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-python@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-python (windows-latest, 3.11):
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
build-python (windows-latest, 3.11):
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
build-python (windows-latest, 3.11):
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
build-python (windows-latest, 3.11):
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-python (windows-latest, 3.11):
tests/Python/TestType.fs#L571
An indexed property's getter and setter must have the same type. Property 'Item' has getter of type 'int' but setter of type 'string'.
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-python (windows-latest, 3.11):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-standalone
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-standalone:
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-rust (threaded)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-rust (threaded)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (threaded)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (threaded)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (threaded)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-rust (threaded):
tests/Rust/tests/src/ApplicativeTests.fs#L1730
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
build-rust (threaded):
tests/Rust/tests/src/MiscTests.fs#L1206
This rule will never be matched
|
analyzers
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: github/codeql-action/upload-sarif@v2. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
analyzers:
tests/React/SpreadSheet.fs#L248
This construct is deprecated. event.keyCode is deprecated see https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode for more information
|
analyzers:
tests/React/SpreadSheet.fs#L248
This construct is deprecated. event.keyCode is deprecated see https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode for more information
|
analyzers:
tests/React/SpreadSheet.fs#L248
This construct is deprecated. event.keyCode is deprecated see https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode for more information
|
analyzers:
src/quicktest-dart/QuickTest.fs#L41
Main module of program is empty: nothing will happen when it is run
|
analyzers:
tests/Python/TestApplicative.fs#L1088
This construct causes code to be less generic than indicated by the type annotations. The type variable 'T has been constrained to be type 'Result<'a,int>'.
|
analyzers:
tests/Python/TestApplicative.fs#L1090
The instantiation of the generic type 'Const' is missing and can't be inferred from the arguments or return type of this member. Consider providing a type instantiation when accessing this type, e.g. 'Const<_,_>'.
|
analyzers:
tests/Python/TestApplicative.fs#L1090
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Applicative<'T> has been constrained to be type 'Const<'a,Result<'b,int>>'.
|
analyzers:
tests/Python/TestApplicative.fs#L1653
This construct causes code to be less generic than indicated by the type annotations. The type variable 'Functor has been constrained to be type 'Functor'.
|
analyzers:
src/fable-library-rust/src/List.fs#L34
Failed to inline the value 'consNoTail' marked 'inline', perhaps because a recursive value was marked 'inline'
|
analyzers:
src/fable-library-rust/src/List.fs#L35
Failed to inline the value 'setConsTail' marked 'inline', perhaps because a recursive value was marked 'inline'
|
analyzers
CodeQL Action v2 will be deprecated on December 5th, 2024. Please update all occurrences of the CodeQL Action in your workflow files to v3. For more information, see https://github.blog/changelog/2024-01-12-code-scanning-deprecation-of-codeql-action-v2/
|
analyzers
Uploading multiple SARIF runs with the same category is deprecated and will be removed on June 4, 2025. Please update your workflow to upload a single run per category. For more information, see https://github.blog/changelog/2024-05-06-code-scanning-will-stop-combining-runs-from-a-single-upload
|
build-javascript (windows-latest)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-javascript (windows-latest)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions/setup-dotnet@v1, actions/setup-node@v2.4.1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L35
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L295
Failed to inline the value 'transformExprOpt' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L685
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L828
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L899
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L912
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|
build-javascript (windows-latest):
src/Fable.Transforms/FSharp2Fable.fs#L938
Failed to inline the value 'transformExprList' marked 'inline', perhaps because a recursive value was marked 'inline'
|