This program receives NRSC-5 digital radio stations using an SDR device like an SDRplay RSP, any SDR supported by SoapySDR, or an RTL-SDR dongle. It offers a command-line interface as well as an API upon which other applications can be built. Before using it, you'll first need to compile the program using the build instructions below.
- download and install the SDRPlay API version 3.X (currently 3.07) from here: https://www.sdrplay.com/downloads/
- download and unzip the latest version of the command line NRSC5 decoder for Windows 32 bit from here: https://github.com/fventuri/nrsc5/releases - to extract the program you have to accept the licenses (GPL3 and FAAD2)
- copy the 32 bit SDRplay API dll to the same folder where you have extracted the NRSC5 decoder - the 32 bit SDRplay API dll is normally under
C:\Program Files\SDRplay\API\x86\sdrplay_api.dll - run the nrsc5 decoder as follows:
nrsc5-32 89.9 0
- where the first number is the FM station frequency and second number is the digital channel you want to listen to (more options like antenna and gain selection are fully described below).
- download and install the SDRPlay API version 3.X (currently 3.07) from here: https://www.sdrplay.com/downloads/
- download and unzip the latest version of the command line NRSC5 decoder for Windows 64 bit from here: https://github.com/fventuri/nrsc5/releases - to extract the program you have to accept the licenses (GPL3 and FAAD2)
- copy the 64 bit SDRplay API dll to the same folder where you have extracted the NRSC5 decoder - the 64 bit SDRplay API dll is normally under
C:\Program Files\SDRplay\API\x64\sdrplay_api.dll - run the nrsc5 decoder as follows:
nrsc5-64 89.9 0
- where the first number is the FM station frequency and second number is the digital channel you want to listen to (more options like antenna and gain selection are fully described below).
- install the prerequisites dependencies (libao, fftw, and portaudio) for MacOS. For instance using the 'brew' package manager, the command would be:
brew install libao fftw portaudio
- download and install the SDRPlay API version 3.X (currently 3.07) from here: https://www.sdrplay.com/downloads/
- download and unzip the latest version of the command line NRSC5 decoder for MacOS from here: https://github.com/fventuri/nrsc5/releases - to extract the program you have to accept the licenses (GPL3 and FAAD2)
- run the nrsc5 decoder as follows:
nrsc5-macos 89.9 0
- where the first number is the FM station frequency and second number is the digital channel you want to listen to (more options like antenna and gain selection are fully described below).
Prerequisites and git repository clone:
Note: <SDR_DRIVER> below is one of: rtlsdr, sdrplay, or soapy
$ sudo apt install git build-essential cmake autoconf libtool libao-dev libfftw3-dev librtlsdr-dev
$ git clone https://github.com/fventuri/nrsc5.git
$ cd nrsc5
$ mkdir build
$ cd build
$ cmake -DSDR_DRIVER=<SDR_DRIVER> [options] ..
$ make
$ sudo make install
$ sudo ldconfig
Available build options:
-DUSE_NEON=ON Use NEON instructions. [ARM, default=OFF]
-DUSE_SSE=ON Use SSSE3 instructions. [x86, default=OFF]
-DUSE_FAAD2=ON AAC decoding with FAAD2. [default=ON]
-DLIBRARY_DEBUG_LEVEL=1 Debug logging level for libnrsc5. [default=5]
-DSDR_DRIVER=rtlsdr Build nrsc5 for RTL-SDR
-DSDR_DRIVER=sdrplay Build nrsc5 for SDRplay (SDRplay API version 3)
-DSDR_DRIVER=soapy Build nrsc5 for SoapySDR
You can test the program using the included sample capture (only RTL-SDR version):
$ xz -d < ../support/sample.xz | src/nrsc5 -r - 0
Follow the Ubuntu instructions above, but replace the first command with the following:
$ sudo dnf install make patch cmake autoconf libtool libao-devel fftw-devel rtl-sdr-devel libusb-devel
Building on macOS using Homebrew
$ curl https://raw.githubusercontent.com/fventuri/nrsc5/master/nrsc5.rb > /tmp/nrsc5
$ brew install --HEAD -s /tmp/nrsc5
To build the program for Windows, you can either use MSYS2 on Windows, or else use a cross-compiler on an Ubuntu, Debian or macOS machine. Scripts are provided to help with both cases.
Install MSYS2. Open a terminal using the "MSYS2 MinGW 32-bit" shortcut. (Or use the 64-bit shortcut if you prefer a 64-bit build.)
$ pacman -Syu
If this is the first time running pacman, you will be told to close the terminal window. After doing so, reopen using the same shortcut as before.
$ pacman -Su
$ pacman -S git
$ git clone https://github.com/fventuri/nrsc5.git
Note: <SDR_DRIVER> below is one of: rtlsdr, sdrplay, or soapy
$ nrsc5/support/msys2-build <SDR_DRIVER>
You can test your installation using the included sample file:
$ cd ~/nrsc5/support
$ xz -d sample.xz
$ nrsc5.exe -r sample 0
If the sample file does not work, make sure you followed all of the instructions. If it still doesn't work, file an issue with the error message. Please put "[Windows]" in the title of the issue.
Once everything is built, you can run nrsc5 independently of MSYS2. Copy the following files from your MSYS2/mingw32 directory (e.g. C:\msys64\mingw32\bin):
- libnrsc5.dll
- nrsc5.exe
Note: <SDR_DRIVER> below is one of: rtlsdr, sdrplay, or soapy
$ sudo apt install mingw-w64
$ support/win-cross-compile 32 <SDR_DRIVER>
Replace 32 with 64 if you want a 64-bit build. Once the build is complete, copy *.dll and nrsc5.exe from the build-win32/bin (or build-win64/bin) folder to your Windows machine.
$ brew install mingw-w64
$ support/win-cross-compile 32 <SDR_DRIVER>
Replace 32 with 64 if you want a 64-bit build. Once the build is complete, copy *.dll and nrsc5.exe from the build-win32/bin (or build-win64/bin) folder to your Windows machine.
frequency center frequency in MHz or Hz
(do not provide frequency when reading from file)
program audio program to decode
(0, 1, 2, or 3)
-g gain RTL-SDR: gain
(example: 49.6)
(automatic gain selection if not specified)
SDRplay: LNAstate.IFGR (IFGR=0 -> AGC enabled)
SoapySDR: GainName1=GainValue1,... (AGC=1 to enable AGC)
-d device-index RTL-SDR: rtl-sdr device
SDRplay: RSP serial number
SoapySDR: SoapySDR device arguments (driver, serial, etc)
-p ppm-error ppm error
-A antenna antenna (only SDRplay and SoapySDR)
-H rtltcp-host rtl_tcp host with optional port (only RTL-SDR)
(example: localhost:1234)
-r iq-input read IQ samples from input file (only RTL-SDR)
-w iq-output write IQ samples to output file (only RTL-SDR)
-o audio-output write audio to output WAV file
-q disable log output
-l log-level set log level
(1 = DEBUG, 2 = INFO, 3 = WARN)
-v print the version number and exit
--am receive AM signals
(default is FM)
-T enable bias-T
-D direct-sampling-mode enable direct sampling
(1 = I-ADC input, 2 = Q-ADC input)
--dump-aas-files dir-name dump AAS files
(WARNING: insecure)
--dump-hdc file-name dump HDC packets
Tune to 107.1 MHz and play audio program 0:
$ nrsc5 107.1 0
Tune to 107.1 MHz and play audio program 0. Manually set gain to 49.0 dB and save raw IQ samples to a file:
$ nrsc5 -g 49.0 -w samples1071 107.1 0
Read raw IQ samples from a file and play back audio program 0:
$ nrsc5 -r samples1071 0
Tune to 90.5 MHz and convert audio program 0 to WAV format for playback in an external media player:
$ nrsc5 -o - 90.5 0 | mplayer -
To switch between audio programs at runtime, press 0, 1, 2, or 3.
To quit, press Q.
If you get errors trying to access your RTL-SDR device, then you may need to use Zadig to change the USB driver. Once you download and run Zadig, select your RTL-SDR device, ensure the driver is set to WinUSB, and then click "Replace Driver". If your device is not listed, enable "Options" -> "List All Devices".
- This SDRplay and SoapySDR components of this program have only been tested under Linux
- To use the sdrplay driver with SoapySDR, you need to allow for the specific NRSC5 sampling rate (744187.5 Hz); the version in the master branch of the driver SoapySDRPlay3 does not currently support this sample rate, so you'll need a modified version that you can find here: https://github.com/fventuri/SoapySDRPlay3/tree/nrsc5-sampling-rate (repository: https://github.com/fventuri/SoapySDRPlay3.git - branch: nrsc5-sampling-rate)