All changes were push to the official repository.
BRANCH | kernel version | Boot | Shutdown/Reboot | eMMC | HDMI | VPU |
---|---|---|---|---|---|---|
edge |
xdarklight's v5.18-rc |
✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
current |
v5.14 |
✔️ | ✔️ | ✔️ | ❌ | ❌ |
legacy |
v5.11 |
✔️ | ✔️ | ✔️ | ❌ | ❌ |
<=v5.10 |
✔️ | ✔️ | ❌ | ❌ | ❌ | |
>=v5.15 |
Take a long time | ❌ | ✔️ | ❌ | ❌ |
See above. Only work with BRANCH=edge
bootdev="usb 0"
rootdev="/dev/sda2"
usb start
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000
bootdev="mmc 1"
rootdev="/dev/mmcblk1p2"
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000
In the board, there is a missing 44-pins chip (WiFi module possibly) which has lots of pins connected to the SoC
. They are ablt to be used as GPIO
.
Please check the dts
(added by patch/kernel/archive/meson-{5.10,5.18}/support-xunlei-onecloud.patch
) for more details.
NOTE: These pins were found in V1.0 board
. Those in V1.3 board
was not confirmed yet.