Prepare for new release (1.0.5)

CHANGES.md

@@ -1,9 +1,11 @@
-v1.0.5 (not released yet)
-=========================
+v1.0.5 (30-Jul-2019)
+====================
 
 Experimental data
 -----------------
 
+- Process experimental data in a consistent order (i.e., I-V and IF data should be processed in the same way).
+- Add warning if normal resistance is too low or too high. This can help to detect if you are using the wrong units for the current.
 - Make parameters in ``qmix.exp.parameters`` more consistent. Changes include:
  - ``voffset_range``, which defines where the voltage offset is potentially found, is now defined as a list. E.g., if the experimental voltage offset could be found anywhere between -0.5mV and 0.1mV, you now use ``voffset_range=(-0.5e-3, 0.1e-3)``. This change is backwards compatible, so you can still define it as a float if you like. For example, if you set ``voffset_range=1e-3``, this is equivalent to ``voffset_range=(-1e-3, 1e-3)``.
  - ``rn_vmin`` and ``rn_vmax``, which previously defined where the normal resistance was calculated, are now combined into ``vrn``. Previously, this was defined using ``rn_vmin`` and ``rn_vmax``. Now, it is defined using ``vrn`` as a list. For example, if you previously used ``rn_vmin=4e-3`` and ``rn_vmax=5e-3``, you would now use ``vrn=(4e-3, 5e-3)``. This change is backwards compatible, so you can still use ``rn_vmin`` and ``rn_vmax``.
@@ -12,8 +14,6 @@ Experimental data
  - ``vgap_guess`` and ``igap_guess`` have been removed. They actually weren't needed all along.
  - ``ifdata_vmax``, which previously defined the maximum IF voltage to import, has been removed. QMix now uses the value from ``vmax`` instead.
  - ``ifdata_sigma``, which defines the width of the filter for the IF data, is now defined in units [V]. Previously, it was defined by the number of data points. This is also backwards compatible (if ``ifdata_sigma`` is >0.5, it will assume that you are defining it by the number steps).
-- Process experimental data in a consistent order (i.e., I-V and IF data should be processed in the same way).
-- Add warning if normal resistance is too low or too high. This can help to detect if you are using the wrong units for the current.
 
 Optimization
 ------------

codemeta.json

@@ -20,7 +20,7 @@
  "datePublished": "2019-04-15",
  "dateModified": "2019-04-15",
  "dateCreated": "2019-04-15",
- "description": "QMix is a software package for simulating quasiparticle tunneling currents in Superconductor/Insulator/Superconductor (SIS) junctions. These junctions are commonly used for heterodyne mixing at millimeter and submillimeter wavelengths. QMix can be used to simulate their performance, investigate their experimental results and optimize their operation.",
+ "description": "QMix is a software package for simulating the quasiparticle tunneling currents in Superconductor/Insulator/Superconductor (SIS) junctions. In radio astronomy, these junctions are used for heterodyne mixing at millimeter and submillimeter wavelengths. QMix can be used to simulate the behavior of SIS mixers, optimize their performance and investigate experimental results.",
  "keywords": "SIS mixers, radio astronomy, superconducting detectors, terahertz instrumentation, Python",
  "license": "GPL v3.0",
  "title": "QMix",

setup.cfg

@@ -8,4 +8,4 @@ license = GPL v3
 url = https://github.com/garrettj403/QMix
 github_project = garrettj403/QMix
 install_requires = matplotlib, numba, numpy, scipy
-version = 1.0.4
+version = 1.0.5

setup.py

@@ -2,7 +2,7 @@
 
 setup(
  name = "QMix",
- version = "1.0.4",
+ version = "1.0.5",
  author = "John Garrett",
  author_email = "garrettj403@gmail.com",
  description = ("Simulate SIS mixer operation"),