pcb-v12

• Adjust FPC position by 0.7mm
• Add 2 resistors that will protect megadesk from a flipped connector on the companion.

pcb-v11a

Simple change/variant with a 2-pin 7812 package.

pcb-v11

This release changes from a 3-pin header to a 5-pin header which will break out RX/TX pins for those using serial functionality, such as esphome.

pcb-v10

The 5V regulator has been downsized slightly, but pulls power from the (original) beefy 12V regulator.

The width and height of the PCB have been reduced by 1mm in each direction to allow for manufacturing tolerances and fitment in the cases.

v2022.09

Add support for attiny1624

pcb-v9-1624

PCB for ATTiny1624. Does not obsolete the attiny841 version, just hel…

…ps with supply chain issues.  Requires UPDI programmer, will NOT work with classic AVR/ISP programmers (usbtinyisp/etc)

pcb-v8-C668117

Adds two SMD pads for up/down buttons. C668117

v2022.03

Fix intermittent beeping when audio feedback mode is enabled

v2021.09

More great work by @philwmcdonald , this is the latest deemed "stable" ;) Serial is not compiled in the default version.

See the example flash.bat for how to flash using avrdude.

Default build

#define MINMAX
#define FEEDBACK
#define SMALL_INIT
#define ENABLERESET
#define EASTER

Serial build

#define MINMAX
#define FEEDBACK
#define SMALL_INIT
#define ENABLERESET
#define EASTER

#define SERIALCOMMS
#define HUMANSERIAL
#define SERIALECHO
#define SERIALERRORS
#define SERIAL_IDLE

v5

Programming header is accessed as you would expect from the silk screen side. This is the last release to use 1206 SMD components and is easiest for DIY'ers.