mirror

Smart/Magic Mirror

Note: I'm not currently seeking extensive contributions on this project, mainly because I want to be free to significantly change how it works without supporting an installed base, but feel free to use it if it seems interesting to you.

Raspberry Pi Setup

Using Raspberry Pi OS.

It will probably be helpful to enable ssh access, which can be done following the Remote Access instructions.

Install the unclutter package for hiding the mouse cursor, and the xdotool to make it easier to refresh the browser from the command line.

sudo apt-get install unclutter xdotool

You might want to rotate the display if your monitor is hung vertically. Edit /boot/config.txt:

sudo nano /boot/config.txt

Add a line to the end of the file:

display_rotate=3

The value indicates the orientation:

Value	Orientation
0	Normal
1	90 degrees
2	180 degrees
3	270 degrees

Install docker following the instructions for Raspbian from the documentation, including adding your user to the docker group in the post install instructions.

Copy the mirror-server.service systemd service unit file from this repo and enable it:

sudo cp ~/mirror/system/mirror-server.service /etc/systemd/system/
sudo systemctl enable mirror-server

Make a backup of your autostart file (just in case):

sudo cp /etc/xdg/lxsession/LXDE-pi/autostart /etc/xdg/lxsession/LXDE-pi/autostart.bak

Copy the autostart file from the project:

sudo cp ~/mirror/system/autostart /etc/xdg/lxsession/LXDE-pi/autostart

If you want, use the scroff.sh and scron.sh scripts in a cron job to schedule when the screen will be off/on. Those need to be run by root. To edit cron jobs, run:

sudo crontab -e

For example, turn on at 5:45 AM, off at 11 PM, add these lines:

45 5  * * * /home/pi/mirror/system/scron.sh
0 23  * * * /home/pi/mirror/system/scroff.sh

https://www.raspberrypi.org/documentation/linux/usage/cron.md

You'll also need to create a /home/pi/mirror/instance directory, and configure services as described below.

The software runs in a Docker container. You can run it the first time or update it later with the system/run.sh script.

Development

The mirror application is built with Python using Starlette and htmx.

Information on the mirror is provided by plugins. A plugin is a data source, plus one or more widgets that specify how the data is displayed. More information about developing plugins appears later in this document.

Setup

Install pdm, then:

pdm install --dev

Run with either:

pdm run mirror

or

python3 src/mirror/main.py

The server runs on http://localhost:5000.

Pre-commit hook

For tests, linting and other checks before commit:

pdm run pre-commit install

Mirror Configuration

Widgets can generally appear on the mirror in three zones: left and right, where all widgets are shown all the time, and bottom, where widgets are rotated to display them one at a time. The enabled widgets and their zone are configured in instance/mirror.toml.

[widgets]
left = ["weather", "activity", "now_playing"]
right = ["clock", "calendars-agenda", "calendars-coming_up", "calendars-countdown"]
bottom = ["word_ptbr", "mail", "positivity"]

To do any configuration that plugins might need, run the config utility. This can be done in a couple of ways:

In the development environment:

pdm run config

On device, when a Docker image exists:

~/mirror/system/config.sh

That will prompt you for any settings for all plugins, storing them well-obfuscated in instance/mirror.db. Specific plugins can be configured using the --plugins switch. For example:

pdm run config --plugins mail weather

Some configuration requires using a web browser (such as to handle OAuth), so you'll either need to have a keyboard attached to the device, or you can do configuration on another machine (like a desktop PC) and copy instance/mirror.db and instance/mirror.key to the device.

Plugins

Details about plugins requiring non-trivial configuration are explained below.

Activity

Fitbit step count for the day.

1. Go to https://dev.fitbit.com/apps, logging in with your Fitbit account.
2. Click on "Register a new app"
3. Fill in the requested data. Most of the values before "OAuth 2.0 Application Type" will be used for the authorization prompt, so the values don't matter much.
4. For "OAuth 2.0 Application Type" choose "Personal"
5. For "Redirect URL" enter "http://localhost:5000/fitbit"
6. For "Default Access Type" choose "Read-Only"
7. After agreeing to terms, click "Register"
8. When that succeeds, click the "OAuth 2.0 tutorial page" link
9. For "Flow type" choose "Authorization Code Flow"
10. For "Select Scopes" check "activity"
11. There is a link below text saying, "We've generated the authorization URL for you, all you need to do is just click on link below:" Click it.
12. Your browser will go to the callback URL entered earlier (likely displaying an error), and will have a code query parameter like ?code=7b64c4b088b9c841d15bcac15d4aa7433d35af3e#_=. Copy the 7b64c4b088b9c841d15bcac15d4aa7433d35af3e part.
13. Run the mirror config and enter the prompted values. For Authorization code, enter the value copied from the URL in the previous step.

Note: The authorization code can only be used once, so if something goes wrong, you may need to generate a new one and re-run configuration to try again.

Calendars

Data from your Google Calendar.

You'll first need to set up access to the calendar API. You can do that from this page and clicking on "Enable the API".

Follow the prompts to get a client id json file. You'll need that when running configure.py.

Scope: .../auth/calendar.events.readonly View events on all your calendars

Application type: Desktop Application

Running configure.py will also launch your default browser so that you can authorize the mirror application that you just set up for read-only access to your Google Calendars.

The agenda shows events for today, and "all-day" events for the next week. You can filter out some upcoming events with a regular expression. Events whose summary matches the regular expression are excluded.

If you want to have calendar events farther out show up, you can put "mirror-countdown" in them somewhere (probably the description makes the most sense).

Calendars named "Dinner" or "Meals" show a special icon in the agenda widget.

Mail

You can send an email with "Mirror" in the subject (case-insensitive) and have that appear on the mirror for a week. Usually that makes the most sense rotated with other bottom widgets. The config utility will ask for IMAP settings. For example:

IMAP_HOST = 'imap.gmail.com'
IMAP_PORT = 993
IMAP_USERNAME = 'somebody@sample.com'
IMAP_PASSWORD = 'mysecretpassword'

If you want to use a Gmail account, you'll need to enable IMAP in the Gmail settings. Also, it might work best to use two-factor authentication and create an app password for the mirror.

Now Playing

Currently playing track from Spotify (requires a Spotify Premium account).

1. Create an app at Spotify's Developer Dashboard following these instructions. Use "http://localhost:5050/auth" for the redirect URI.
2. Run mirror-config --plugins=now_playing and follow the prompts.

Weather

Current weather and forecasts using Open Weather Map, and air quality from AirNow.

Setup for this plugin requires two API keys, which you can get from:

• Open Weather Map
• AirNow

Sentry Logging

You can get a free "hobbyist" account at https://sentry.io. This will let you get alerts if something goes wrong in the application.

Then add a SENTRY_CONFIG dictionary to instance/config.py like that shown in the documentation.

Troubleshooting

If the browser doesn't show the right data when starting the Pi, it's likely that the Python application had an exception while starting. You can check that by ssh into the Pi and running:

systemctl status mirror-server

Or, to see more logs:

journalctl -u mirror-server

Plugin development

A typical plugin has this structure:

mirror/plugins/my_plugin
    static
        my_plugin.css
        my_plugin.png
    __init__.py
    my_plugin.html

• The static directory has static assets needed for rendering, if any.
• The __init__.py module exposes the plugin interface to the mirror application. At minimum, the file must exist, but typically it will also expose any of these functions that it needs:
  • configure_plugin - Called by the config utility to prompt the user for config.
  • start_plugin - Called by the main mirror app at startup time.
  • stop_plugin - Called by the main mirror app at shutdown time.
• The my_plugin.html is the Jinja2 template to render the plugin's main widget.

Templates can use url_for("my_plugin.png") to reference a file in the plugin's static directory. This is not the same url_for provided by Starlette.

By convention, to avoid style conflicts, use #my_plugin scoping on CSS selectors. For example:

#my_plugin p { color: white; }

Return no markup if a widget doesn't have anything to display (for example, the mail plugin does this is there aren't any emails). Especially with the bottom zone, the widget is skipped while rotating if there is nothing to show, rather than being blank for the rotation period.

The mirror application provides some services to plugins via the PluginContext class, such as the ability to read and write persistent config data. A plugin should call the PluginContext.widget_updated when its data has been updated such that one of its widgets would display differently.

You can look at the existing plugins for examples of how things work, including:

• The calendars plugin, which has multiple widgets.
• The weather plugin, which has two data sources.
• The positivity plugin, which has multiple messages that rotate each time the plugin itself is rotated.