There are a lot of reasons why you'd want to go bare metal with your CARTO installation. Among them:
- Higher speeds
- Full integration with your workflow (proper syntax highlight, copy and paste, etc)
- Achieve a broader, more complete, understanding of how CARTO works.
You will need a couple of tools:
git(which you can get with XCode)brew(which you can install get from brew.sh)
NOTE: Make sure you have installed Xcode (via Mac App Store), the xcode command line tools (xcode-select --install) and agreed to the license (sudo xcodebuild -license), since it's a requirement for a lot of brew packages.
You can use other tools to install the necessary packages (macports for example) but I advise you stick with these ones and don't mix package managers. Even resorting to installing a package from source is better than mixing sym links and all that hell.
All we're really doing, is following the official install guide for CARTO with some workarounds where non OSX tools are used.
As you may know, CARTO requires 5 main pieces (and its dependencies) in order to run:
- PostgreSQL (and the CARTO PostgreSQL extension)
- SQL API
- Maps API
- CARTO
We will now cover the installation of all of these. BTW, I'm assuming you're an organized human being and have a workspace. Mine is ~/Documents/workspace/carto/. Also, NEVER run commands with sudo unless it's strictly necessary. Preventive sudo is a bad habit that spreads and messes up your permissions. Don't do it! Always try without it first, and only sudo as a last resort.
We will use brew to install PostgreSQL 9.6. There is one important bit though, we must specify --with-python to make sure we get that plypythonu extension we will later need.
If you have a previous version of PostgreSQL, make sure to migrate it. See brew info postgresql for details. If you decide to uninstall it completely, run brew remove postgresql. When you have sorted that out:
brew install postgresql@9.6 --with-python@2
NOTE: Make sure you read the message left after the installation. It will give you instructions to add the postgres executables in your path. Follow those instructions before continuing or else you will get command not found errors for all pg_... commands.
Make PostgreSQL 9.6 server run:
pg_ctl -D /usr/local/var/postgresql@9.6 -l /usr/local/var/postgresql@9.5/server.log start
There is one point here where I'm sure there's a better solution, but it turns out that the db is created with a default superuser role with the name of you session user (in my case 'guido'). The (quite embarrassing) way of changing this for me is:
# Create a temp superadmin role
psql -U postgres -d postgres -c "CREATE USER banana WITH createrole superuser"
# Rename you default user to postgres using that temp role
psql -U banana -d postgres -c "ALTER USER guido RENAME TO postgres"
# Drop the temp role
psql -U postgres -d postgres -c "DROP USER banana"
Ok! So we have a PostgreSQL database we can use. You can run brew services start postgresql95 to start the PostgreSQL db (and restart automatically when you restart your computer). Now we have to configure it. By convention, brew will install everything under /usr/local/var/. This is important, we will have to do some symlinking later. For now, let's modify the pg_hba.conf and add a single line so any locally running app (our future CARTO instace) can access our db without authentication:
echo "local all postgres trust" >> /usr/local/var/postgres@9.6/pg_hba.conf
Now, our postgres user has access to the db. Now, let's add some roles that the app will use:
createuser publicuser --no-createrole --no-createdb --no-superuser -U postgres
createuser tileuser --no-createrole --no-createdb --no-superuser -U postgres
You're db is now configured! We will now install the cartodb-postgresql extension and its dependencies.
To install the extension, all you need is to clone the extension's git (inside your workspace, organized human being), cd into it and make it (no sudo!!!). This will build some files and put them in the postgres extension path we saw before. Note that you will have to visit the repo and find out what the latest release tag is. At the time of writing this guide it's 0.18.5
cd ~/Documents/workspace/carto
git clone https://github.com/CartoDB/cartodb-postgresql.git
cd cartodb-postgresql
git checkout <latest-release-tag>
make all install
Of course, now we have to install the extension's dependencies.
One said dependency is plypythonu, but luckily that was taken care of when we specified --with-python in the PostgreSQL installation. Let's talk instead of postgis and gdal. We encourage you to install gdal before postgis to avoid problems with the installation of the last one.
We use a very specific version of ogr2ogr. At the time of this guide, it's 2.1.0. The issue is that the gdal dependency that has been installed with postgis contains ogr2ogr v1.1.11, which is not good. To make things worse, there is no brew installer for this version and the automatic formula for installing "latest" (2.2) is broken atm (and "latest" builds are not maintained by brew, understandably).
Fear not, local installer, we will install from source! In your workspace (maybe not in ~/Documents/workspace/carto since it's not really a part of CARTO), let's clone the GDAL repo:
cd ~/Documents/workspace
git clone https://github.com/OSGeo/gdal.git
cd gdal/gdal
git checkout tags/2.1.0
./configure
make install
NOTE: If you see an error mentioning jpeg2000 while installing GDAL 2.1, try replacing JAS_CAST(uchar *, buf) with JAS_CAST(unsigned char*, buf) in frmts/jpeg2000/jpeg2000_vsil_io.cpp, line 212. Via http://osgeo-org.1560.x6.nabble.com/gdal-dev-jpeg2000-jasper-error-compiling-gdal-2-1-from-git-release-branch-td5299100.html
NOTE: If you're having trouble with bash-completion, do: brew remove bash-completion && brew install bash-completion@2 and try again. Make sure to do a make clean before retrying.
postgis time! Installing it is very simple. We'll install from source to be sure sure that it will use PostgreSQL 9.5. You also need to create some postgis templates in the db for CARTO to work with:
brew install automake libtool geos proj libxml2 json-c
cd ~/Documents/workspace
git clone https://github.com/postgis/postgis.git
cd postgis
git checkout 2.2.1
./autogen.sh
./configure
make install
sudo createdb -T template0 -O postgres -U postgres -E UTF8 template_postgis
sudo createlang plpgsql -U postgres -d template_postgis
psql -U postgres template_postgis -c "CREATE EXTENSION postgis; CREATE EXTENSION postgis_topology;"
That should be working. Now we need to focus on schema_tiggers. For that, we'll build from source as well. We will clone the pg_schema_triggers in our workspace and make it:
cd ~/Documents/workspace
git clone https://github.com/CartoDB/pg_schema_triggers.git
cd pg_schema_triggers
make
make install
That's it, all dependencies needed for building the cartodb extensions are here. Now we can:
psql -U postgres -d postgres -c "CREATE EXTENSION plpythonu; CREATE EXTENSION schema_triggers; CREATE EXTENSION postgis; CREATE EXTENSION cartodb;"
This should finish successfully. If not, stop and ask for help.
We'll also install the odbc_fdw extension to make the latest connectors work. We'll clone a CARTO maintained version of the extension for PostgreSQL 9.5+ and compile+install.
cd ~/Documents/workspace
git clone https://github.com/CartoDB/odbc_fdw.git
cd odbc_fdw
make install
NOTE: If you find issues with a missing sql.h header file, do: brew install psqlodbc and try again.
NOTE: In case you've tried these instructions with PostgreSQL 9.6 and encountered an error with odbc_fdw, try editing odbc_fdw.c with the changes found here: https://github.com/CartoDB/odbc_fdw/pull/46/files
If the installation is successful we're done here. The user creation process will create the extension for all new users. If you want to upgrade an existent user, make sure to connect to the user database (you can find the database name in user.database_name field) and run:
psql -U postgres -d <user db name> -c "CREATE EXTENSION odbc_fdw"
Your DB is ready to go!
Let's try to get the SQL API up and running.
Let's tackle first the dependencies. We need:
- Redis
- Node
To install redis, we can simply:
brew install redis
For node, you need to know we use an outdated version, so we need a good tool to manage node versions. This tool is called nvm. Let's install it:
brew install nvm
NOTE: Pay attention to the instructions at the end of this execution: it tells you how to set nvm to work in your machine (create dirs and export paths). If you don't do this, you might get a 'nvm command not found' error. If you closed the message (fast fella huh?) you can bring it back doing brew info nvm ;).
Now let's tell nvm to install the version of node we want and to set it as global:
nvm install v6.9.2
nvm use global v6.9.2
Let's download the actual SQL API code:
cd ~/Documents/workspace/carto
git clone git://github.com/CartoDB/CartoDB-SQL-API.git
cd CartoDB-SQL-API
Now we can install all the packages (timely):
npm install
By now, you might realise that the SQL API is a Node app. We need to configure it. Let's start by copying the sample config as our main config:
cp config/environments/development.js.example config/environments/development.js
One last step: let's point this app to listen in 0.0.0.0, which is needed since CARTO will run locally and need all it's parts to listen to internal requests (you might be thinking 127.0.0.1, but that would listen to local on a network but not same-machine comms).
Open config/environments/development.js in your favorite editor, find the line that reads module.exports.node_host = '127.0.0.1'; and make sure you change it to module.exports.node_host = '0.0.0.0';. Save and let's try to start it up:
node app.js development
Congratulations! The SQL API is running in macOS!
The dependencies for the Maps API are the same as for the SQL API, if you skipped that section go install those dependencies and come back.
Let's clone the repo for the Maps API:
cd ~/Documents/workspace/carto
git clone https://github.com/CartoDB/Windshaft-cartodb.git
cd Windshaft-cartodb
I know I said all dependencies were installed, but that's not completely true. We need some stuff for cairo to work, so let's intall pango via brew:
brew install pango
You will need Yarn in order to install packages:
npm install yarn
Now we can install all the packages (timely):
node_modules/.bin/yarn
Note: The yarn package manager may not always work. If it fails please try using the npm package manager instead (npm install)
By now, you might realise that the Maps API is a Node app. We need to configure it. Let's start by copying the sample config as our main config:
cp config/environments/development.js.example config/environments/development.js
One last step: let's point this app to listen in 0.0.0.0, which is needed since CARTO will run locally and need all it's parts to listen to internal requests (you might be thinking 127.0.0.1, but that would listen to local on a network but not same-machine comms).
Open config/environments/development.js in your favorite editor, find the line that reads host: '127.0.0.1' and make sure you change it to host: '0.0.0.0'. Save and let's try to start it up:
NOTE: If you're having segmentation fault errors, try to change your node version to 0.10.47.
node app.js development
Congrats! You have the Maps API (a full tiler!) running in macOS.
Now let's go for the piece that consumes from them all, the Builder! This is a Rails app, so we need:
- Ruby (v2.2.3)
Like with the SQL API and Maps API where we needed nvm to keep track of the node version we were using, we'll use rvm to keep install the right version of Ruby for our need (v2.2.3). Let's first install rvm (no brew port, sorry!)
\curl -sSL https://get.rvm.io | bash -s stable --ruby
source ~/.rvm/scripts/rvm
And now we can do (these two will take a while):
rvm install ruby-2.2.3
rvm --default use 2.2.3
Now that we have Ruby, we can tackle Rails and all other Ruby gems in one go. We just need bundler and the source code for the CARTO Builder.
gem install bundler
What bundler does is grab all the gems defined in the Gemfile file and install them with their specified version. Convenient!
cd ~/Documents/workspace/carto
git clone https://github.com/CartoDB/cartodb.git
cd CartoDB
There's a problem though: Apple doesn't ship standard c++11 compiler on macos, but the libraries are still there. We need to tell the bunlder gem to build eventmachine and charlock_holmes gems using these c++11 libraries. To do so, we:
bundle config build.eventmachine --with-cxxflags=-std=c++11
bundle config build.charlock_holmes --with-cxxflags=-std=c++11
Now we can run the bundler gem with confidence:
bundle install
In case you see an eventmachine/openssl issue with bundle install, either in this step or perhaps later, try bundle config build.eventmachine --with-cppflags=-I$(brew --prefix openssl)/include via http://stackoverflow.com/questions/30818391/gem-eventmachine-fatal-error-openssl-ssl-h-file-not-found/31516586#31516586
In case you see an eventmachine/charlock_holmes issue with bundle install, try bundle config build.eventmachine --with-icu-dir=/usr/local/opt/icu4c via brianmario/charlock_holmes#122. This assumes that you have icu4c installed. If you don't, you can install it using brew install icu4c.
Edit python_requirements.txt and change GDAL version to 2.1.0: gdal==2.1.0.
sudo easy_install pip
sudo -H pip install -r python_requirements.txt --ignore-installed six
Now we just have to configure our Rails server. We will have to copy two different sample config files and make them our real config files:
cp config/database.yml.sample config/database.yml
cp config/app_config.yml.sample config/app_config.yml
PRO TIP: You may also symlink these. That way it's easier to keep up with future changes done to the .sample file, usually meaning new features.
Let's take a moment to update submodules in the CartoDB repo, and make sure we have the latest version of the CartoDB PostgreSQL extension.
git submodule init
git submodule update
cd lib/sql
make install
cd ../..
NOTE: You'll have to do this every time the CartoDB PostgreSQL extension is updated!
Ok, we're almost done. Remember we built from source gdal v2.2.1 and installed it? Well, that brings ogr2ogr v2.2.1 with it and that's what we need, but sadly the config file is thought for on-premise installations were the binary is renamed with every version. So you need to open config/app_config.yml and change binary: 'which ogr2ogr2.1 to binary: 'which ogr2ogr'.
While we're on the subject of ogr2ogr, used by the importer to grab a CSV and put it in a db table, let's install one other thing the importer will need: the unp unpacker.
brew install unp
Now, let's migrate our db to work with CARTO (in addition to postgresql, you must run redis):
redis-server &
bundle exec rake db:create
bundle exec rake db:migrate
PRO TIP: you might want to alias bex='bundle exec', it's used often ;)
One last step is to install all the node modules (CARTO Builder also uses them for front stuff):
npm install
Let's start it up! (Make sure your PostgreSQL database is running, as well as your Redis server).
bundle exec rails server
Boom, you're running! Don't forget to start the resque script for queued jobs to run:
bundle exec script/resque
Well, you've done away with the vagrant and you're free. Now let me suggest you create aliases for starting all the different pieces. I suggest these:
alias start_builder='cd ~/Documents/workspace/carto/cartoDB; bundle exec rails s -p 3000'
alias start_resque='cd ~/Documents/workspace/carto/cartoDB; bundle exec script/resque'
alias start_tiler='cd ~/Documents/workspace/carto/Windshaft-cartodb; node app.js development'
alias start_sql_api='cd ~/Documents/workspace/carto/CartoDB-SQL-API; node app.js development'
alias start_redis='redis-server &'
alias start_postgres='pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start'
alias stop_postgres='pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log stop'
Now you can open up a fullscreen terminal with 4 sections:
+---------------+-----------------+
| | start_postgres |
| start_sql_api | start_redis |
| | start_builder |
+---------------+-----------------+
| | |
| start_tiler | start_resque |
| | |
+---------------+-----------------+
And there you have it, CARTO is running on the Mac.
You need to create a user to be able to use CARTO. To do so (the mkdir log is just in case you don't have it):
cd ~/Documents/workspace/carto
mkdir log
script/create_dev_user
Follow the instructions. I'll assume you chose the users username (or domain, as the script calls it) username. Now all that is left is that you insert a rule in /etc/hosts to redirect username.localhost.lan:3000 to Rails. Open up (you can't avoid sudo here) /etc/hosts in your editor and add:
127.0.0.1 username.localhost.lan
Save and you're done. Fire up all the pieces and visit username.localhost.lan:3000 in you favorite browser.