Add project to repo (#1084)

* Create README.md

* Update README.md

* Add files via upload

* Update README.md

* Add files via upload

* Add files via upload

* Create a

* Add files via upload

* Delete projects/kake's nfc card/src/a

* Delete projects/kake's nfc card/cart.png

* Add files via upload

* Update README.md

---------

Co-authored-by: blaze <Arnnav0kudale@gmail.com>

projects/kake's nfc card/README.md

@@ -0,0 +1,18 @@
+---
+name: "Ethan Zhou"
+slack_handle: "@kake"
+github_handle: "@kakenbutter"
+tutorial: https://jams.hackclub.com/jam/hacker-card#Turn%20your%20design...%20into%20an%20actual%20card
+---
+
+# NFC Card
+
+## Summary
+This PCB, as per the "PCB Hacker Card" tutorial, is like a business card but with one catch: it has NFC! The NFC chip on the card can be programmed to store a variety of things, from my email to a link to a website. This card is definitely not your average business card.
+
+## Cost
+This design should cost $40.33.
+
+## Design
+While editing the PCB, I realized that the pads on the front of the board went all the way through to the other side, which didn't look good. So I did a bit of digging around the internet and figured out that I could use blind vias to have a trace on multiple layers without having an ugly hole in my PCB. 
+Designing a PCB for the first time was daunting, especially when I started deviating from the tutorial, but I was able to make it in the end.