AutoRCCar

See self-driving in action

A scaled down version of self-driving system using a RC car, Raspberry Pi, Arduino and open source software. The system uses a Raspberry Pi with a camera and an ultrasonic sensor as inputs, a processing computer that handles steering, object recognition (stop sign and traffic light) and distance measurement, and an Arduino board for RC car control.

Dependencies

• Raspberry Pi:
  • Picamera
• Computer:
  • Numpy
  • OpenCV 2.4.10.1
  • Pygame
  • PiSerial

About

• raspberrt_pi/
  • stream_client.py: stream video frames in jpeg format to the host computer
  • ultrasonic_client.py: send distance data measured by sensor to the host computer
• arduino/
  • rc_keyboard_control.ino: acts as a interface between rc controller and computer and allows user to send command via USB serial interface
• computer/
  • cascade_xml/
    • trained cascade classifiers xml files
  • chess_board/
    • images for calibration, captured by pi camera
  • training_data/
    • training data for neural network in npz format
  • training_images/
    • saved video frames during image training data collection stage (optional)
  • mlp_xml/
    • trained neural network parameters in a xml file
  • picam_calibration.py: pi camera calibration, returns camera matrix
  • collect_training_data.py: receive streamed video frames and label frames for later training
  • mlp_training.py: neural network training
  • rc_driver.py: a multithread server program receives video frames and sensor data, and allows RC car drives by itself with stop sign, traffic light detection and front collision avoidance capabilities
• test/
  • rc_control_test.py: RC car control with keyboard
  • stream_server_test.py: video streaming from Pi to computer
  • ultrasonic_server_test.py: sensor data streaming from Pi to computer
• Traffic_signal/
  • trafic signal sketch contributed by @geek111

How to drive

1. Flash Arduino: Flash “rc_keyboard_control.ino” to Arduino and run “rc_control_test.py” to drive the rc car with keyboard (testing purpose)

2. Pi Camera calibration: Take multiple chess board images using pi camera at various angles and put them into “chess_board” folder, run “picam_calibration.py” and it returns the camera matrix, those parameters will be used in “rc_driver.py”

3. Collect training data and testing data: First run “collect_training_data.py” and then run “stream_client.py” on raspberry pi. User presses keyboard to drive the RC car, frames are saved only when there is a key press action. When finished driving, press “q” to exit, data is saved as a npz file.

4. Neural network training: Run “mlp_training.py”, depend on the parameters chosen, it will take some time to train. After training, model will be saved in “mlp_xml” folder

5. Cascade classifiers training (optional): trained stop sign and traffic light classifiers are included in the "cascade_xml" folder, if you are interested in training your own classifiers, please refer to OpenCV documentation and this great tutorial by Thorsten Ball

6. Self-driving in action: First run “rc_driver.py” to start the server on the computer and then run “stream_client.py” and “ultrasonic_client.py” on raspberry pi.