[posix] Addressing coverity warning: Resource leak #24
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # Copyright (c) 2020, The OpenThread Authors. | |
| # All rights reserved. | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are met: | |
| # 1. Redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer. | |
| # 2. Redistributions in binary form must reproduce the above copyright | |
| # notice, this list of conditions and the following disclaimer in the | |
| # documentation and/or other materials provided with the distribution. | |
| # 3. Neither the name of the copyright holder nor the | |
| # names of its contributors may be used to endorse or promote products | |
| # derived from this software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| # POSSIBILITY OF SUCH DAMAGE. | |
| # | |
| name: Build | |
| on: | |
| push: | |
| branches-ignore: | |
| - 'dependabot/**' | |
| pull_request: | |
| branches: | |
| - 'main' | |
| concurrency: | |
| group: ${{ github.workflow }}-${{ github.event.pull_request.number || (github.repository == 'openthread/openthread' && github.run_id) || github.ref }} | |
| cancel-in-progress: true | |
| permissions: | |
| contents: read | |
| jobs: | |
| pretty: | |
| runs-on: ubuntu-22.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y clang-format-14 clang-tidy-14 shellcheck | |
| python3 -m pip install yapf==0.31.0 | |
| sudo snap install shfmt | |
| npm install prettier@2.0.4 | |
| - name: Check | |
| run: | | |
| script/make-pretty check | |
| markdown-lint-check: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| - uses: gaurav-nelson/github-action-markdown-link-check@5c5dfc0ac2e225883c0e5f03a85311ec2830d368 # v1 | |
| with: | |
| use-verbose-mode: 'yes' | |
| max-depth: 3 | |
| spell-check: | |
| runs-on: ubuntu-22.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| python -m pip install --upgrade pip | |
| pip install codespell | |
| - name: Check | |
| run: | | |
| script/code-spell check | |
| cmake-version: | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo apt-get --no-install-recommends install -y build-essential ninja-build libreadline-dev libncurses-dev | |
| sudo apt-get remove cmake | |
| sudo apt-get purge --auto-remove cmake | |
| wget http://www.cmake.org/files/v3.10/cmake-3.10.3.tar.gz | |
| tar xf cmake-3.10.3.tar.gz | |
| cd cmake-3.10.3 | |
| ./configure | |
| sudo make install | |
| cmake --version | grep 3.10.3 | |
| - name: Build | |
| run: | | |
| OT_NODE_TYPE=rcp ./script/test build | |
| package: | |
| name: package-${{ matrix.compiler }} | |
| runs-on: ubuntu-20.04 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| include: | |
| - compiler: gcc | |
| compiler_c: gcc | |
| compiler_cpp: g++ | |
| - compiler: clang | |
| compiler_c: clang | |
| compiler_cpp: clang++ | |
| env: | |
| CC: ${{ matrix.compiler_c }} | |
| CXX: ${{ matrix.compiler_cpp }} | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y ninja-build libreadline-dev libncurses-dev | |
| - name: Package | |
| run: | | |
| script/test package | |
| scan-build: | |
| runs-on: ubuntu-22.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y clang-tools-14 ninja-build | |
| - name: Run | |
| run: | | |
| script/check-scan-build | |
| mbedtls3-build: | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo apt-get --no-install-recommends install -y ninja-build libreadline-dev libncurses-dev | |
| rm -rf third_party/mbedtls/repo | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| repository: ARMmbed/mbedtls | |
| ref: v3.2.1 | |
| path: third_party/mbedtls/repo | |
| - name: Build | |
| run: | | |
| ./script/test build | |
| arm-gcc: | |
| name: arm-gcc-${{ matrix.gcc_ver }} | |
| runs-on: ubuntu-20.04 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| include: | |
| - gcc_ver: 4 | |
| gcc_download_url: https://launchpad.net/gcc-arm-embedded/4.9/4.9-2015-q3-update/+download/gcc-arm-none-eabi-4_9-2015q3-20150921-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-4_9-2015q3 | |
| - gcc_ver: 5 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu-rm/5_4-2016q3/gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-5_4-2016q3 | |
| - gcc_ver: 6 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2/gcc-arm-none-eabi-6-2017-q2-update-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-6-2017-q2-update | |
| - gcc_ver: 7 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu-rm/7-2018q2/gcc-arm-none-eabi-7-2018-q2-update-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-7-2018-q2-update | |
| - gcc_ver: 9 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu-rm/9-2019q4/RC2.1/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-9-2019-q4-major | |
| - gcc_ver: 10 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu-rm/10.3-2021.10/gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2 | |
| gcc_extract_dir: gcc-arm-none-eabi-10.3-2021.10 | |
| - gcc_ver: 11 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu/11.3.rel1/binrel/arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-eabi.tar.xz | |
| gcc_extract_dir: arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-eabi | |
| - gcc_ver: 12 | |
| gcc_download_url: https://developer.arm.com/-/media/Files/downloads/gnu/12.2.rel1/binrel/arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| gcc_extract_dir: arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| cd /tmp | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y build-essential lib32z1 ninja-build gcc-arm-linux-gnueabihf g++-arm-linux-gnueabihf | |
| wget --tries 4 --no-check-certificate --quiet ${{ matrix.gcc_download_url }} -O gcc-arm | |
| tar xf gcc-arm | |
| sudo apt-get remove cmake | |
| sudo apt-get purge --auto-remove cmake | |
| wget http://www.cmake.org/files/v3.10/cmake-3.10.3.tar.gz | |
| tar xf cmake-3.10.3.tar.gz | |
| cd cmake-3.10.3 | |
| ./configure | |
| sudo make install | |
| cmake --version | grep 3.10.3 | |
| - name: Build | |
| env: | |
| GITHUB_TOKEN: "${{ secrets.GITHUB_TOKEN }}" | |
| run: | | |
| export PATH=/tmp/${{ matrix.gcc_extract_dir }}/bin:$PATH | |
| script/check-arm-build | |
| gcc: | |
| name: gcc-${{ matrix.gcc_ver }} | |
| runs-on: ubuntu-22.04 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| gcc_ver: [9, 10, 11, 12] | |
| env: | |
| CC: gcc-${{ matrix.gcc_ver }} | |
| CXX: g++-${{ matrix.gcc_ver }} | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| case ${{ matrix.gcc_ver }} in | |
| 11) | |
| sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test | |
| ;; | |
| esac | |
| sudo apt-get --no-install-recommends install -y gcc-${{ matrix.gcc_ver }} g++-${{ matrix.gcc_ver }} ninja-build libreadline-dev libncurses-dev | |
| - name: Build | |
| run: | | |
| script/check-simulation-build | |
| script/check-posix-build | |
| clang: | |
| name: clang-${{ matrix.clang_ver }} | |
| runs-on: ubuntu-20.04 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| clang_ver: ["9", "10", "11", "12", "13"] | |
| env: | |
| CC: clang-${{ matrix.clang_ver }} | |
| CXX: clang++-${{ matrix.clang_ver }} | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add - | |
| echo 'deb http://apt.llvm.org/focal/ llvm-toolchain-focal main | |
| deb-src http://apt.llvm.org/focal/ llvm-toolchain-focal main | |
| # 13 | |
| deb http://apt.llvm.org/focal/ llvm-toolchain-focal-13 main | |
| deb-src http://apt.llvm.org/focal/ llvm-toolchain-focal-13 main' | sudo tee -a /etc/apt/sources.list | |
| sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y clang-${{ matrix.clang_ver }} clang++-${{ matrix.clang_ver }} ninja-build libreadline-dev libncurses-dev | |
| - name: Build | |
| run: | | |
| script/check-simulation-build | |
| script/check-posix-build | |
| clang-m32: | |
| name: clang-m32-${{ matrix.clang_ver }} | |
| runs-on: ubuntu-20.04 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| clang_ver: ["9", "10", "11", "12", "13"] | |
| env: | |
| CC: clang-${{ matrix.clang_ver }} | |
| CXX: clang++-${{ matrix.clang_ver }} | |
| CFLAGS: -m32 -Wconversion | |
| CXXFLAGS: -m32 -Wconversion | |
| LDFLAGS: -m32 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo dpkg --add-architecture i386 | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add - | |
| echo 'deb http://apt.llvm.org/focal/ llvm-toolchain-focal main | |
| deb-src http://apt.llvm.org/focal/ llvm-toolchain-focal main | |
| # 13 | |
| deb http://apt.llvm.org/focal/ llvm-toolchain-focal-13 main | |
| deb-src http://apt.llvm.org/focal/ llvm-toolchain-focal-13 main' | sudo tee -a /etc/apt/sources.list | |
| sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y clang-${{ matrix.clang_ver }} clang++-${{ matrix.clang_ver }} ninja-build | |
| sudo apt-get --no-install-recommends install -y g++-multilib libreadline-dev:i386 libncurses-dev:i386 | |
| - name: Build | |
| run: | | |
| script/check-simulation-build | |
| script/check-posix-build | |
| gn: | |
| runs-on: ubuntu-20.04 | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| sudo rm /etc/apt/sources.list.d/* && sudo apt-get update | |
| sudo apt-get --no-install-recommends install -y ninja-build | |
| cd /tmp | |
| wget -O gn.zip https://chrome-infra-packages.appspot.com/dl/gn/gn/linux-amd64/+/latest | |
| unzip -o gn.zip | |
| chmod a+x gn && mkdir -p bin && mv -f gn bin/ | |
| - name: Build | |
| run: | | |
| export PATH=/tmp/bin:$PATH | |
| script/check-gn-build | |
| macos: | |
| name: macos-${{ matrix.CC }} | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| include: | |
| - CC: clang | |
| CXX: clang++ | |
| - CC: gcc | |
| CXX: g++ | |
| runs-on: macos-12 | |
| env: | |
| CC: ${{ matrix.CC }} | |
| CXX: ${{ matrix.CXX }} | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Bootstrap | |
| run: | | |
| brew update | |
| wget --tries 4 https://github.com/ninja-build/ninja/releases/download/v1.11.1/ninja-mac.zip | |
| unzip ninja-mac.zip && mv ninja /usr/local/bin/. | |
| - name: Build | |
| run: | | |
| script/check-posix-build | |
| script/check-simulation-build | |
| android-ndk: | |
| name: android-ndk | |
| runs-on: ubuntu-22.04 | |
| container: | |
| image: openthread/environment | |
| steps: | |
| - name: Harden Runner | |
| uses: step-security/harden-runner@8ca2b8b2ece13480cda6dacd3511b49857a23c09 # v2.5.1 | |
| with: | |
| egress-policy: audit # TODO: change to 'egress-policy: block' after couple of runs | |
| - uses: actions/checkout@3df4ab11eba7bda6032a0b82a6bb43b11571feac # v4.0.0 | |
| with: | |
| submodules: true | |
| - name: Install unzip | |
| run: apt update && apt install -y unzip | |
| - name: Setup NDK | |
| id: setup-ndk | |
| uses: nttld/setup-ndk@v1 | |
| with: | |
| ndk-version: r25c | |
| local-cache: true | |
| - name: Build | |
| env: | |
| NDK: ${{ steps.setup-ndk.outputs.ndk-path }} | |
| run: | | |
| rm -rf build/ && OT_CMAKE_NINJA_TARGET="ot-daemon ot-ctl" script/cmake-build android-ndk | |
| rm -rf build/ && OT_CMAKE_NINJA_TARGET="ot-cli" script/cmake-build android-ndk |