twinkly explain operation modes #36567
Conversation
home-assistant
bot
added
current
|
It seems that this PR is targeted against an incorrect branch since it has a parent PR on one of our codebases. Documentation that needs to be updated for an upcoming release should target the |
✅ Deploy Preview for home-assistant-docs ready!
To edit notification comments on pull requests, go to your Netlify site configuration. |
📝 WalkthroughWalkthroughThe pull request updates the documentation for the Twinkly integration in Home Assistant. The changes focus on providing a more comprehensive and structured explanation of the integration's capabilities. A new section detailing operation modes is introduced, clarifying the supported and unsupported functionalities of Twinkly devices. The documentation now offers more precise guidance on how users can interact with Twinkly lights, including information about turning lights on/off, adjusting brightness, controlling colors and effects, and switching between different operation modes. Changes
Sequence DiagramsequenceDiagram
participant User
participant HomeAssistant
participant TwinklyDevice
User->>HomeAssistant: Configure Twinkly Integration
HomeAssistant->>TwinklyDevice: Establish Connection
alt Turn On/Off
User->>HomeAssistant: Send Power Command
HomeAssistant->>TwinklyDevice: Toggle Power
end
alt Change Mode
User->>HomeAssistant: Select Operation Mode
HomeAssistant->>TwinklyDevice: Switch Mode (Color/Movie/Playlist)
end
alt Adjust Settings
User->>HomeAssistant: Modify Brightness/Color
HomeAssistant->>TwinklyDevice: Update Device Settings
end
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
source/_integrations/twinkly.markdown (3)
23-29: Add blank lines around the bullet-point list.The content effectively summarizes the integration's capabilities. However, for better markdown formatting:
This integration can be used to: + - Turn your Twinklys on and off - Adjust brightness - Control static colors and effects - Switch between operation modes (see explanation below) +🧰 Tools
🪛 Markdownlint (0.37.0)
24-24: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
37-37: Improve readability with proper punctuation.Consider adding a comma for better clarity:
-Make sure the latest firmware is installed on your Twinkly devices and add effects by _apply_-ing them from the Twinkly app. +Make sure the latest firmware is installed on your Twinkly devices, and add effects by _apply_-ing them from the Twinkly app.🧰 Tools
🪛 LanguageTool
[uncategorized] ~37-~37: Possible missing comma found.
Context: ...t firmware is installed on your Twinkly devices and add effects by apply-ing them fro...(AI_HYDRA_LEO_MISSING_COMMA)
39-70: Improve document structure using proper markdown headers.The content provides excellent explanations of operation modes. However, the structure could be improved using proper markdown headers instead of bold text:
## Operation Modes Modes can be switched using the select entity. For most use cases, "Color", "Movie" and "Playlist" modes are the most relevant. -**Color Mode** +### Color Mode + - Displays a static color - Controlled through the light entity - Color can be set via RGB/RGBW -**Movie Mode** +### Movie Mode + - Plays effects previously uploaded through the Twinkly app - Effects must be created and transferred to the device first using the app - Effect selection is done through the light entity -**Playlist Mode** +### Playlist Mode + - Sequential playback of multiple effects - Playlist must be uploaded through the Twinkly app first -**Off Mode** +### Off Mode + - Turns off the lighting -**Demo Mode** +### Demo Mode + - Shows predefined demo effects - Primarily intended for presentation purposes - Limited practical use -**Unsupported Modes:** +### Unsupported Modes + - Effect Mode: predefined effects built into the device, you are probably better off using Movie Mode - RT (Real-Time): Live control of individual LEDs - Music: Music-controlled light show🧰 Tools
🪛 Markdownlint (0.37.0)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
46-46: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
51-51: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
56-56: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
60-60: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
63-63: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
68-68: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
45-45: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
50-50: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
55-55: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
59-59: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
62-62: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/twinkly.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/twinkly.markdown
[uncategorized] ~37-~37: Possible missing comma found.
Context: ...t firmware is installed on your Twinkly devices and add effects by apply-ing them fro...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
source/_integrations/twinkly.markdown
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
24-24: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
46-46: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
51-51: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
56-56: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
60-60: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
63-63: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
68-68: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
45-45: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
50-50: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
55-55: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
59-59: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
62-62: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
🔇 Additional comments (1)
source/_integrations/twinkly.markdown (1)
23-70: Documentation changes look great! 👍
The added content successfully explains the Twinkly integration's operation modes and capabilities. The information is well-organized, accurate, and helpful for users. The suggested formatting improvements are minor and don't impact the quality of the information provided.
🧰 Tools
🪛 LanguageTool
[uncategorized] ~37-~37: Possible missing comma found.
Context: ...t firmware is installed on your Twinkly devices and add effects by apply-ing them fro...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces
(MD009, no-trailing-spaces)
24-24: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
46-46: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
51-51: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
56-56: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
60-60: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
63-63: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
68-68: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
45-45: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
50-50: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
55-55: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
59-59: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
62-62: null
Emphasis used instead of a heading
(MD036, no-emphasis-as-heading)
sVnsation
requested review from
a team,
fabaff,
gjohansson-ST,
starkillerOG,
frenck,
iMicknl,
balloob,
abmantis,
ochlocracy and
jbouwh
as code owners
home-assistant
bot
removed
current
home-assistant
bot
added
current
home-assistant
bot
removed
needs-rebase
There was a problem hiding this comment.
Caution
Inline review comments failed to post. This is likely due to GitHub's limits when posting large numbers of comments.
Actionable comments posted: 2
🧹 Nitpick comments (50)
source/_integrations/image_upload.markdown (1)
18-18: Consider enhancing the media browser noteWhile the added information about media browser visibility is valuable, consider making it more actionable.
-Uploaded images are also viewable in the media browser. +Uploaded images are viewable in the Media Browser, accessible through the sidebar menu.source/_integrations/cambridge_audio.markdown (1)
107-112: New "Browsing media" section looks good, but needs minor formatting fixThe new section provides clear and useful information about browsing presets functionality. However, there is a trailing space on line 110 that should be removed.
Apply this diff to fix the formatting:
-The Cambridge Audio integration allows you to browse saved presets from your dashboard. +The Cambridge Audio integration allows you to browse saved presets from your dashboard.🧰 Tools
🪛 Markdownlint (0.37.0)
110-110: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
source/_integrations/opentherm_gw.markdown (1)
76-81: LGTM! Consider a minor clarification.The documentation for the new "Cancel Room Setpoint Override" button is well-structured and clear. The explanation effectively communicates the button's purpose and location.
Consider adding a brief example or use case to help users better understand when they might want to use this button. For example:
Pressing this button, which can be found on the `OpenTherm Thermostat` device, cancels an active room setpoint override. Note that it does not change the target temperature, it only returns control to the thermostat. +For example, you might use this button when you want to cancel a temporary temperature adjustment and return to the programmed schedule.source/_integrations/transmission.markdown (1)
93-93: Consider adding parameter type and path requirements.While the parameter description is clear, consider enhancing it with:
- The parameter type (string)
- Any path format requirements or restrictions
- Whether relative paths are supported
-| `download_path` | yes | Absolute path to the download directory. If not specified, the Transmission's default directory will be used. | +| `download_path` | yes | Absolute path to the download directory (string). Must be a valid system path accessible by Transmission. Relative paths are not supported. If not specified, the Transmission's default directory will be used. |source/_integrations/iotty.markdown (2)
53-58: Consider adding regional compatibility information.The new iotty Outlet section is well-structured. However, it would be helpful to clarify if these region-specific models are strictly limited to their respective markets or if they can be used in other countries with appropriate adapters.
65-65: Improve sentence clarity.The current sentence structure is a bit awkward. Consider rewording for better clarity.
-The main, unnamed, switch entity controls the light switch or the outlet switch, turning it on or off the gang related to it. +The main, unnamed, switch entity controls either a light switch or an outlet switch, allowing you to turn on or off the associated gang.source/_integrations/lcn.markdown (2)
112-112: Fix markdown list formatting.The lists have incorrect indentation and missing blank lines which affects readability.
Apply these changes:
- Add blank lines before and after the lists
- Fix list indentation to be 0 spaces instead of 2 spaces
Entities configured for all devices are listed on the **Entities** tab. To view entities for a specific device (module or group), in the **Modules / Groups** tab, select the device entry. - **Result**: The **Entities** tab opens, showing entities of the selected device. - To apply custom filters, enable the filter option.  To delete a single entity, select the trash can icon next to it. - **Result**: This removes the entity from the list and from Home Assistant.Also applies to: 131-131
🧰 Tools
🪛 Markdownlint (0.37.0)
112-112: Expected: 0; Actual: 2
Unordered list indentation(MD007, ul-indent)
112-112: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
434-435: Enhance action parameter documentation.The documentation for actions can be improved for better clarity and consistency.
Consider these improvements:
- Add descriptions for what each action does at the start of each action section
- Add examples of valid values for the
device_idparameter- Add cross-references to related sections where applicable
- Use consistent formatting for parameter tables
For example:
### Action: `output_abs` Controls the absolute brightness of an output port by setting it to a specific percentage value. | Data attribute | Optional | Description | Values | Example | | ------------- | -------- | ----------- | ------ | ------- | | `device_id` | No | Unique identifier for the LCN device | string | "91aa039a2fb6e0b9f9ec7eb219a6b7d2" |Also applies to: 440-444, 462-466, 483-487, 506-509, 524-527, 545-548, 574-577, 601-604, 625-628, 649-652, 686-689, 721-725, 741-744
source/_docs/tools/quick-bar.markdown (1)
55-56: Remove extra blank lineThere's an extra blank line that should be removed to maintain consistent spacing between sections.
This is helpful when you need to quickly access a device's detail page without navigating your way through the menu. - ## Command palette🧰 Tools
🪛 Markdownlint (0.37.0)
56-56: Expected: 1; Actual: 2
Multiple consecutive blank lines(MD012, no-multiple-blanks)
source/_integrations/iron_os.markdown (3)
58-60: Enhance binary sensor documentation with state details.While the binary sensor description is clear, it would be helpful to explicitly document the possible states (true/false) and what they indicate.
Consider expanding the description like this:
- **Soldering tip:** Indicates whether a soldering tip is currently connected to the device. + **Soldering tip:** Indicates whether a soldering tip is currently connected to the device (true = connected, false = disconnected or not detected).
82-118: LGTM: Comprehensive and well-structured settings documentation.The device settings section is thorough, well-organized, and follows documentation best practices. The safety-critical settings include appropriate warnings and context.
One minor suggestion to enhance clarity:
Consider emphasizing the power limit behavior more clearly:
- **Power limit:** Sets a custom wattage cap for the device to maintain the **average** power below this value. Note: Peak power cannot be controlled. When using USB-PD, the limit will be the lower of this setting and the power supply's advertised wattage. + **Power limit:** Sets a custom wattage cap for the device to maintain the **average** power below this value. + - Note: Peak power cannot be controlled + - When using USB-PD, the effective limit will be the lower of: + - This setting + - The power supply's advertised wattage
119-124: Fix markdown formatting for better readability.The advanced settings section needs proper spacing around the list for better readability and to comply with markdown best practices.
Add blank lines around the list:
These settings are intended for technically experienced users and require careful consideration before changes. - **Voltage divider:** Fine-tunes the measured voltage to account for variations in the voltage sense resistors between units. - **Calibration offset:** Adjusts the calibration of the thermocouple measurements, which determine the temperature displayed for the tip. ## Automations🧰 Tools
🪛 Markdownlint (0.37.0)
124-124: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
source/_integrations/weheat.markdown (1)
52-53: Consider adding more context to compressor sensors.While the descriptions are clear, users might benefit from additional information:
- For the RPM sensor: Consider adding typical value ranges or what the values indicate
- For the percentage sensor: Consider explaining why/when it might exceed 100%
source/_integrations/ituran.markdown (3)
29-33: Enhance security and OTP process documentationConsider adding:
- Information about how the OTP process works (expiration time, retry limits).
- A note about the secure storage of sensitive information (government ID/passport number).
- Troubleshooting steps if OTP is not received.
49-54: Enhance sensor documentation with formatting and examplesConsider these improvements:
- Use consistent formatting for units (e.g.,
km/hvskm/h).- Add example values for each sensor.
- Consider using a table format for better readability.
Example table format:
| Sensor | Unit | Description | Example Value | |--------|------|-------------|---------------| | Battery voltage | V | The measured voltage of the car battery | 12.6 | | Heading | ° | The direction the vehicle is pointing to | 180 |
58-60: Add troubleshooting guidance for known limitationsConsider adding:
- Steps to resolve app conflict (how to properly switch between app and integration).
- Guidance on when to trust/not trust heading values.
- Expected mileage calculation accuracy range.
source/_integrations/twinkly.markdown (2)
23-29: LGTM with minor formatting suggestionsThe capabilities section is clear and well-structured. Consider adding a blank line before the bullet point list to follow markdown best practices.
This integration can be used to: + - Turn your Twinklys on and off🧰 Tools
🪛 Markdownlint (0.37.0)
24-24: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
39-70: Improve markdown structure for better readabilityThe Operation Modes section provides excellent information but could benefit from proper markdown formatting:
- Use proper heading syntax for mode names
- Add consistent spacing around lists
- Use consistent list formatting
Apply these changes:
## Operation Modes -Modes can be switched using the select entity. +Modes can be switched using the select entity. For most use cases, "Color", "Movie" and "Playlist" modes are the most relevant. -**Color Mode** +### Color Mode + - Displays a static color - Controlled through the light entity - Color can be set via RGB/RGBW -**Movie Mode** +### Movie Mode + - Plays effects previously uploaded through the Twinkly app - Effects must be created and transferred to the device first using the app - Effect selection is done through the light entity -**Playlist Mode** +### Playlist Mode + - Sequential playback of multiple effects - Playlist must be uploaded through the Twinkly app first -**Off Mode** +### Off Mode + - Turns off the lighting -**Demo Mode** +### Demo Mode + - Shows predefined demo effects - Primarily intended for presentation purposes - Limited practical use -**Unsupported Modes:** +### Unsupported Modes + - Effect Mode: predefined effects built into the device, you are probably better off using Movie Mode - RT (Real-Time): Live control of individual LEDs - Music: Music-controlled light show🧰 Tools
🪛 Markdownlint (0.37.0)
41-41: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
46-46: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
51-51: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
56-56: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
60-60: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
63-63: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
68-68: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
45-45: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
50-50: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
55-55: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
59-59: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
62-62: null
Emphasis used instead of a heading(MD036, no-emphasis-as-heading)
source/_integrations/holiday.markdown (1)
24-24: Fix grammar in country categories description-Some countries provides additional categories to be configured besides the public holidays. +Some countries provide additional categories to be configured besides the public holidays.🧰 Tools
🪛 LanguageTool
[grammar] ~24-~24: You should probably use “provide”.
Context: ...using the entity state. Some countries provides additional categories to be configured ...(AGREEMENT_SENT_START)
source/_integrations/ohme.markdown (2)
23-23: Fix typo in prerequisites sectionChange "Ah Ohme account" to "An Ohme account".
🧰 Tools
🪛 LanguageTool
[uncategorized] ~23-~23: Interjections are usually punctuated.
Context: ...o Home Assistant. ## Prerequisites - Ah Ohme account. If you signed up to Ohme ...(INTERJECTIONS_PUNCTUATION)
[uncategorized] ~23-~23: “you” seems less likely than “you’re” (you are).
Context: ...## Prerequisites - Ah Ohme account. If you signed up to Ohme with a third party ac...(AI_HYDRA_LEO_CP_YOU_YOUARE)
[uncategorized] ~23-~23: If this is a compound adjective that modifies the following noun, use a hyphen.
Context: ...ccount. If you signed up to Ohme with a third party account like Google, you will need to [...(EN_COMPOUND_ADJECTIVE_INTERNAL)
58-60: Improve readability of Status sensor statesConsider formatting the states as a bullet list for better readability:
- **Description**: Current status of the charger. Possible states: `Unplugged`, `Pending approval`, `Plugged in`, `Charging`. + **Description**: Current status of the charger. Possible states: + - `Unplugged` + - `Pending approval` + - `Plugged in` + - `Charging`source/_dashboards/logbook.markdown (1)
44-47: Add migration note for users upgrading from old configurationConsider adding a note to help users migrate from the old
entitiesconfiguration to the newtargetconfiguration:target: required: true description: The target to use for the card. type: map + note: "This replaces the previous `entities` configuration. If you're upgrading, move your entity IDs to the `entity_id` key under `target`."source/_integrations/slide_local.markdown (3)
37-37: Fix grammatical errorChange "To setup" to "To set up" as "setup" is a noun while "set up" is the verb form.
🧰 Tools
🪛 LanguageTool
[grammar] ~37-~37: The word “setup” is a noun. The verb is spelled with a white space.
Context: ...lude integrations/config_flow.md %} To setup the integration you need the following ...(NOUN_VERB_CONFUSION)
57-57: Add missing articleChange "Your slide device will appear as cover" to "Your slide device will appear as a cover".
🧰 Tools
🪛 LanguageTool
[uncategorized] ~57-~57: Possible missing article found.
Context: ...Cover Your slide device will appear as cover. ### Button You can start the calibra...(AI_HYDRA_LEO_MISSING_A)
28-32: Improve clarity of reset button instructionsThe reset button instructions could be clearer about the sequence and feedback:
- Press the reset button 2x - -LED flashes 5x fast: cloud API disabled, local API enabled -LED flashes 2x slow: local API disabled, cloud API enabled +1. Press the reset button twice in quick succession +2. The LED will indicate the new mode: + - 5 quick flashes: Local API enabled (cloud API disabled) + - 2 slow flashes: Cloud API enabled (local API disabled)source/_integrations/aemet.markdown (1)
73-74: Consider enhancing the radar image entity documentation.While the current documentation is accurate, it could be more helpful to users by including:
- The type of radar image provided (e.g., precipitation, reflectivity)
- Update frequency
- Coverage area limitations
source/_integrations/powerfox.markdown (2)
47-48: Consider specifying the exact polling intervalThe documentation states "every minute" but doesn't specify if this is configurable or fixed. Consider adding this detail for clarity.
-The integration will update its information by polling Powerfox every -minute. This ensures the data in Home Assistant is up to date. +The integration will update its information by polling Powerfox every +minute (fixed interval). This ensures the data in Home Assistant is up-to-date.🧰 Tools
🪛 LanguageTool
[uncategorized] ~48-~48: It appears that hyphens are missing in the adjective “up-to-date”.
Context: ...s ensures the data in Home Assistant is up to date. ## Actions This integration does not...(UP_TO_DATE_HYPHEN)
35-35: Enhance feature request guidanceThe current link to feature requests is generic. Consider providing more specific guidance.
-Create a [feature request](/help/) if your device is not supported yet. +Create a [feature request](https://github.com/home-assistant/core/issues/new?assignees=&labels=feature+request&template=feature_request.md) if your device is not supported yet. Please include your device model and any relevant technical specifications.source/_integrations/palazzetti.markdown (2)
46-48: Enhance the Numbers section documentationThe Numbers section could benefit from more detailed information about how to control the combustion power.
## Numbers -The Palazzetti integration offers control over the combustion power of the stove on a scale from `1` to `5`. +The Palazzetti integration offers control over the combustion power of the stove: + +- Scale: `1` (minimum) to `5` (maximum) +- Description: Controls the intensity of the combustion process +- Usage: Adjust based on heating needs and efficiency requirements
102-103: Add missing newline at end of fileThe file should end with a single newline character.
- Pellet quantity (kg - cumulative quantity consumed) - Pellet level (cm - current level) +🧰 Tools
🪛 Markdownlint (0.37.0)
103-103: null
Files should end with a single newline character(MD047, single-trailing-newline)
source/_integrations/watergate.markdown (3)
28-29: Enhance prerequisites sectionThe prerequisites could be more detailed about the Local API setup process.
-- You need to have a Sonic device. -- The Local API feature must be enabled in the Watergate application. +- A Watergate Sonic Wi-Fi device (firmware version X.X or higher) +- The Local API feature enabled in the Watergate application: + 1. Open the Watergate mobile app + 2. Navigate to Settings > Device Settings + 3. Enable the "Local API" toggle + 4. Note down the device's IP address for configuration
75-76: Clarify webhook functionalityThe webhook description could be more precise about setup requirements.
-The Watergate integration fetches data from the Sonic device every 2 minutes. -Thanks to the webhook option, Sonic will provide live telemetry every second when water is flowing directly to Home Assistant. +The Watergate integration fetches data from the Sonic device every 2 minutes. When webhooks are enabled: + +- Live telemetry is pushed every second during water flow +- No additional configuration is required +- Ensures real-time monitoring capabilities
107-107: Add missing newline at end of fileThe file should end with a single newline character.
- Send a notification when water is flowing for too long. +🧰 Tools
🪛 Markdownlint (0.37.0)
107-107: null
Files should end with a single newline character(MD047, single-trailing-newline)
source/_integrations/honeywell.markdown (2)
107-114: Consider adding parameter details for set_humidity actionWhile the actions table is clear, it would be helpful to specify the acceptable range for the humidity level parameter in the
set_humidityaction.Consider adding parameter details like this:
| Action | Description | |--------|-------------| -| `humidifier.set_humidity` | Set target humidity level | +| `humidifier.set_humidity` | Set target humidity level (range: 0-100%) | | `humidifier.turn_on` | Enable humidity control |
118-137: Enhance example with humidity level recommendationsThe automation example is helpful but could be more educational by explaining recommended indoor humidity levels for different seasons.
Consider adding more detailed comments:
# Example configuration.yaml entry automation: - alias: "Maintain Comfortable Humidity" + # Recommended indoor humidity levels: + # Winter (when outside temperature is below 0°F): 15-25% + # Spring/Fall: 30-45% + # Summer: 40-50% trigger: - platform: numeric_state entity_id: sensor.indoor_humidity below: 30 # Trigger when humidity drops below 30%source/_integrations/sensor.markdown (1)
65-66: Consider maintaining consistent unit orderingThe addition of new units (mWh, GWh, mW) is appropriate, but consider ordering units consistently from smallest to largest for better readability.
Consider reordering units like this:
-energy**: Energy in J, kJ, MJ, GJ, mWh, Wh, kWh, MWh, GWh, TWh, cal, kcal, Mcal, or Gcal +energy**: Energy in J, kJ, MJ, GJ, mWh, Wh, kWh, MWh, GWh, TWh, cal, kcal, Mcal, Gcal -power**: Power in mW, W, kW, MW, GW or TW +power**: Power in mW, W, kW, MW, GW, TWAlso applies to: 84-84
source/_integrations/tplink.markdown (2)
58-59: Clarify button limitation noteThe note about button limitations could be more specific about the impact on users.
Consider rewording for clarity:
-The hub attached Tapo buttons S200B and S200D, which do not currently support alerting when the button is pressed. +The hub-attached Tapo buttons (S200B and S200D) cannot trigger automations when pressed, as they do not support state change notifications.
95-99: Add troubleshooting informationWhile the setup instructions are clear, adding common troubleshooting steps would be helpful.
Consider adding:
## Cameras Only Tapo cameras are currently supported. In order for live view to work, you will need to enable your camera account in the Tapo App > **Advanced Settings** > **Camera Account**. If you do not want to do this, keep **Live view** unchecked when adding the device. + +### Troubleshooting + +If you encounter issues: +1. Ensure your camera's firmware is up to date +2. Try rebooting the camera through the Tapo app +3. Check that the camera is on the same network as Home Assistantsource/_integrations/ring.markdown (1)
66-70: Enhance clarity regarding camera entitiesThe documentation clearly explains the two camera entities but could benefit from a brief explanation of when to use each type.
Consider adding a brief note explaining the typical use cases for
live_viewvslast_recording, for example:Two camera entities are provided: `live_view` and `last_recording`. `last_recording` is disabled by default. +`live_view` is ideal for real-time monitoring, while `last_recording` is useful for reviewing past events.source/_dashboards/map.markdown (1)
146-150: Fix markdown formatting issuesThere are trailing spaces in the markdown that should be removed.
label_mode: required: false default: name - description: When set to `icon`, renders the geolocation entity's icon in the marker instead of text. When set to `state`, renders the entity's state as the label for the map marker instead of the entity's name. - type: string + description: When set to `icon`, renders the geolocation entity's icon in the marker instead of text. When set to `state`, renders the entity's state as the label for the map marker instead of the entity's name. + type: string🧰 Tools
🪛 Markdownlint (0.37.0)
149-149: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
150-150: Expected: 0 or 2; Actual: 4
Trailing spaces(MD009, no-trailing-spaces)
source/_integrations/ecovacs.markdown (1)
52-52: Fix punctuation and enhance clarityThere's a loose punctuation mark, and the description could be more specific.
- - `Station actions`: For each supported station action, a button entity will be created. + - `Station actions`: For each supported station action (e.g., clean filter, empty dustbin), a button entity will be created.🧰 Tools
🪛 LanguageTool
[uncategorized] ~52-~52: Loose punctuation mark.
Context: ...manual relocation. -Station actions: For each supported station action, a bu...(UNLIKELY_OPENING_PUNCTUATION)
source/_integrations/music_assistant.markdown (2)
30-30: Add a comma for better readabilityAdd a comma before "then" in the if-then clause.
-If the Music Assistant Server is not installed then follow these [installation instructions] +If the Music Assistant Server is not installed, then follow these [installation instructions]🧰 Tools
🪛 LanguageTool
[typographical] ~30-~30: Consider adding a comma.
Context: ... Music Assistant Server is not installed then follow these [installation instructions...(IF_THEN_COMMA)
125-220: Enhance parameter documentation with more examplesThe new actions are well-documented, but some parameters could benefit from more specific examples:
- For
music_assistant.search: Add example values for multiple media types- For
music_assistant.get_library: Include examples of different sorting options in theorder_byparameterWould you like me to generate comprehensive examples for these parameters?
source/_integrations/bmw_connected_drive.markdown (1)
124-131: Improve formatting of captcha instructionsThe captcha instructions are clear but could benefit from better formatting:
{% important %} -The `North America` and `Rest of world` regions require a captcha challenge to be solved, i.e. you need to verify that you are a human. -After entering your login data, a second step will ask for a `Captcha token` and provide you with a link to a website. -Please open this link, solve the "are you a human?" challenge and press `Submit`. -Copy the resulting token into Home Assistant and continue. +The `North America` and `Rest of world` regions require a captcha challenge to verify that you are a human. + +Steps to complete the captcha: +1. After entering your login data, a second step will ask for a `Captcha token` and provide you with a link +2. Open this link in your browser +3. Solve the "Are you a human?" challenge and press `Submit` +4. Copy the resulting token into Home Assistant and continue No data of your Home Assistant instance is shared with any third party during this step. {% endimportant %}🧰 Tools
🪛 Markdownlint (0.37.0)
126-126: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
source/_integrations/nordpool.markdown (1)
101-146: Minor formatting improvements needed in the configuration section.The new Actions section is well-documented, but there are some minor formatting inconsistencies that should be addressed.
Apply these changes:
- description: Select the Nord Pool configuration entry to target. + description: "Select the Nord Pool configuration entry to target." - description: Pick the date to fetch prices for (see note about possible dates below). + description: "Pick the date to fetch prices for (see note about possible dates below)." - description: Select one market area to create output for. If omitted it will use the areas from the configuration entry. + description: "Select one market area to create output for. If omitted, it will use the areas from the configuration entry." - description: Currency to display prices in. EUR is the base currency in Nord Pool prices. If omitted it will use the currency from the configuration entry. + description: "Currency to display prices in. EUR is the base currency in Nord Pool prices. If omitted, it will use the currency from the configuration entry."🧰 Tools
🪛 LanguageTool
[uncategorized] ~117-~117: Possible missing comma found.
Context: ...ne market area to create output for. If omitted it will use the areas from the configur...(AI_HYDRA_LEO_MISSING_COMMA)
[uncategorized] ~119-~119: Possible missing comma found.
Context: ... base currency in Nord Pool prices. If omitted it will use the currency from the confi...(AI_HYDRA_LEO_MISSING_COMMA)
source/_integrations/tesla_fleet.markdown (2)
43-47: Fix formatting inconsistencies.The Developer Application section contains good information but has some formatting issues.
Replace tabs with spaces and ensure consistent line spacing:
-You must have a [Tesla](https://tesla.com) account, and a [Developer Application](https://developer.tesla.com/en_AU/dashboard). +You must have a [Tesla](https://tesla.com) account and a [Developer Application](https://developer.tesla.com/en_AU/dashboard). ### Developer Application -You must [create your own application](https://developer.tesla.com/docs/fleet-api/getting-started/what-is-fleet-api#step-2-create-an-application) for the Tesla Fleet API and configure it as an [application credential](https://my.home-assistant.io/redirect/application_credentials). +You must [create your own application](https://developer.tesla.com/docs/fleet-api/getting-started/what-is-fleet-api#step-2-create-an-application) for the Tesla Fleet API and configure it as an [application credential](https://my.home-assistant.io/redirect/application_credentials).
56-66: Fix formatting and punctuation in Pay per use section.The new section contains important information about API usage costs but needs formatting improvements.
Apply these changes:
-## Pay per use - -Previously, Tesla restricted this integration to a very modest rate limit. However, from January 2025, accounts in eligible countries will be charged for every API call. Here's what you need to know: - -- Tesla provides a $10 credit per developer account per calandar month -- Every vehicle coordinator refresh, vehicle command, and wake up has a cost -- This credit only allows for a maximum of 5000 coordinator refreshes -- Energy product APIs are free to use at this time -- To go beyond the free credit, you must provide payment details to Tesla - -For more details please see [developer.tesla.com](https://developer.tesla.com). +## Pay per use + +Previously, Tesla restricted this integration to a very modest rate limit. However, from January 2025, accounts in eligible countries will be charged for every API call. Here's what you need to know: + +- Tesla provides a $10 credit per developer account per calendar month. +- Every vehicle coordinator refresh, vehicle command, and wake up has a cost. +- This credit only allows for a maximum of 5000 coordinator refreshes. +- Energy product APIs are free to use at this time. +- To go beyond the free credit, you must provide payment details to Tesla. + +For more details, please see [developer.tesla.com](https://developer.tesla.com).🧰 Tools
🪛 Markdownlint (0.37.0)
57-57: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
57-57: Column: 1
Hard tabs(MD010, no-hard-tabs)
🪛 LanguageTool
[typographical] ~66-~66: Consider adding a comma here.
Context: ...yment details to Tesla For more details please see [developer.tesla.com](https://devel...(PLEASE_COMMA)
source/dashboards/views.markdown (1)
195-199: Add commas after introductory phrases for better readability.Apply these changes:
-For example: `/homeassistant/images/lights_view_background_image.jpg`. +For example, `/homeassistant/images/lights_view_background_image.jpg`.🧰 Tools
🪛 Markdownlint (0.37.0)
196-196: Expected: 0; Actual: 3
Unordered list indentation(MD007, ul-indent)
197-197: Expected: 0; Actual: 3
Unordered list indentation(MD007, ul-indent)
198-198: Expected: 2; Actual: 5
Unordered list indentation(MD007, ul-indent)
199-199: Expected: 0; Actual: 3
Unordered list indentation(MD007, ul-indent)
195-195: Expected: 0 or 2; Actual: 1
Trailing spaces(MD009, no-trailing-spaces)
196-196: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
🪛 LanguageTool
[typographical] ~199-~199: After the expression ‘for example’ a comma is usually used.
Context: ...let you pick an image from the web. For example `https://www.home-assistant.io/images/f...(COMMA_FOR_EXAMPLE)
source/_integrations/peblar.markdown (2)
158-167: Fix grammatical issues for better readability.
- Remove repeated word "current":
-The current current (in amperes) +The current (in amperes)
- Fix article usage:
-when there is an software update +when there is a software update -you will see an suspended charging status +you will see a suspended charging statusAlso applies to: 316-316, 377-377
🧰 Tools
🪛 LanguageTool
[duplication] ~158-~158: Possible typo: you repeated a word
Context: ...evice. {% endtip %} - Current: The current current (in amperes) the charger is consuming t...(ENGLISH_WORD_REPEAT_RULE)
[duplication] ~162-~162: Possible typo: you repeated a word
Context: ...hases: - Current Phase 1**: The current current (in amperes) the charger is consumi...(ENGLISH_WORD_REPEAT_RULE)
[duplication] ~164-~164: Possible typo: you repeated a word
Context: ...ase 1. - Current Phase 2**: The current current (in amperes) the charger is consumi...(ENGLISH_WORD_REPEAT_RULE)
[duplication] ~166-~166: Possible typo: you repeated a word
Context: ...ase 2. - Current Phase 3**: The current current (in amperes) the charger is consumi...(ENGLISH_WORD_REPEAT_RULE)
346-368: Fix automation alias in the example.The automation alias doesn't match its purpose:
- - alias: "Peblar software update available" + - alias: "Peblar issue detected"
🛑 Comments failed to post (2)
source/_integrations/weheat.markdown (1)
55-61: 🛠️ Refactor suggestion
Improve Indoor Unit states documentation.
The section needs several improvements:
- Fix the introduction's wording
- Add descriptions for each state
- Maintain consistent formatting
Consider this revision:
-Depending on the model/installation, states for the Indoor Unit states are available: +The following Indoor Unit states are available depending on your model/installation: -Indoor unit water pump -Indoor unit auxiliary water pump -Indoor unit DHW valve or water pump -Indoor unit gas boiler heating allowed - Note: This may be True even when no gas boiler is installed or active at this time. -Indoor unit electric heater +- **Indoor unit water pump**: Indicates the operational status of the main water pump +- **Indoor unit auxiliary water pump**: Shows the status of the secondary water pump +- **Indoor unit DHW valve or water pump**: Displays the domestic hot water valve/pump state +- **Indoor unit gas boiler heating allowed**: Indicates if gas boiler heating is permitted + Note: May show as True even when no gas boiler is installed or active +- **Indoor unit electric heater**: Shows the operational status of the electric heater📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.The following Indoor Unit states are available depending on your model/installation: - **Indoor unit water pump**: Indicates the operational status of the main water pump - **Indoor unit auxiliary water pump**: Shows the status of the secondary water pump - **Indoor unit DHW valve or water pump**: Displays the domestic hot water valve/pump state - **Indoor unit gas boiler heating allowed**: Indicates if gas boiler heating is permitted Note: May show as True even when no gas boiler is installed or active - **Indoor unit electric heater**: Shows the operational status of the electric heatersource/_integrations/ituran.markdown (1)
24-24: 💡 Codebase verification
iOS app store link needs to be updated
The iOS app store link is broken and returns a 404 error. The current format
https://apps.apple.com/app/id1227756834is incorrect. The link should include a country code and app name, following the formathttps://apps.apple.com/[country]/app/[app-name]/id[app-id]. Please:
- Update the iOS app link to the correct format with appropriate country code and app name
- Verify the app ID (1227756834) is still correct for the Ituran app
🔗 Analysis chain
Verify app store links
Please ensure that the provided Android and iOS app store links are correct and active.
iOS app store link is broken
The Android app store link is valid and accessible (HTTP 200), but the iOS app store link returns a 404 error. This needs to be corrected. The iOS app link should follow the format
https://apps.apple.com/[country]/app/[app-name]/id[app-id]. Let me verify if we can find the correct link.🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify app store links # Note: Using curl with -L to follow redirects and -I for headers only echo "Checking Android app link..." curl -sIL "https://play.google.com/store/apps/details?id=com.ituran.forall" | grep "HTTP/" echo "Checking iOS app link..." curl -sIL "https://apps.apple.com/app/id1227756834" | grep "HTTP/"Length of output: 306
Script:
#!/bin/bash # Search for other instances of the iOS app link in the codebase rg -i "apps.apple.com.*1227756834" -g '!{*.lock,package-lock.json}'Length of output: 370
edenhaus
removed request for
a team,
fabaff,
frenck,
Danielhiversen,
bdraco,
marvin-w,
abmantis,
iMicknl,
balloob,
rytilahti,
ochlocracy,
andrewsayre,
joostlek,
jbouwh,
cgarwood,
farmio,
starkillerOG,
zweckj,
edenhaus,
mib1185 and
gjohansson-ST
|
Hey there @dr1rrb, @RobBie1221, @Olen, mind taking a look at this feedback as it has been labeled with an integration ( Code owner commandsCode owners of
|
Proposed change
Type of change
currentbranch).currentbranch).nextbranch).nextbranch).Additional information
Checklist
currentbranch.nextbranch.Summary by CodeRabbit