Following the announcement of The End of the SmartThings platform built on Grovvy, Tasmota (Connect) will no longer be supported and may not work after September 30, 2022, at 00:00 (PST).
Please migrate your devices to Tasmota Edge.
Tasmota Edge utilizes the latest SmartThings Edge platform technology.
Please see this SmartThings Community - Tasmota Edge topic for more information.
..
Tasmota (Connect) is a SmartApp & Device Type for Samsung SmartThings, that allows you to add your Tasmota devices as SmartThings devices.
See SmartThings Community for feedback, questions and troubleshooting.
- Full support for SmartThings (new) App
- Real-time device status
- Pure Tasmota & SmartThings integration (No need for additional MQTT bridge)
- Virtual Device (for RF / IR devices that can be controlled by a RF / IR bridge)
- Samsung SmartThings Hub v2 or v3
- Official Tasmota Firmware >=8.10
| Firmware | Description |
|---|---|
| tasmota.bin | The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY |
| tasmota-sensors.bin | The Sensors version adds more useful sensors. |
| tasmota-ir | The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. RECOMMENDED firmware for IR Bridge |
Follow the instruction below, and update the SmartApp and Device Handlers codes regularly to receive the latest features.
- If you haven’t enabled GitHub integration, please visit here for instructions.
- Sign in to SmartThings IDE: https://account.smartthings.com/login
- Under
My SmartApps> clickSettings>Add new repository> enter the following:- Owner: hongtat
- Name: tasmota-connect
- Branch: master
- Under
Update from Repo> clicktasmota-connect> Select all files > TickPublish> thenExecute Update - Under
My Device Handlers> clickSettings>Add new repository> enter the following:- Owner: hongtat
- Name: tasmota-connect
- Branch: master
- Under
Update from Repo> clicktasmota-connect> Select all files > TickPublish> thenExecute Update - Open your SmartThings mobile app
- Add Tasmota (Connect) SmartApp
- (New) Go to:
SmartApps>+>My SmartApps>Tasmota (Connect) - (Classic) Go to:
Automation>SmartApps>Add a SmartApp>My Apps>Tasmota (Connect)
- (New) Go to:
- For SmartApp and Device Handler updates,
- Sign in to SmartThings IDE: https://account.smartthings.com/login
- Under
My SmartApps>Update from Repo> clicktasmota-connect> Select all files > TickPublish> thenExecute Update - Under
My Device Handlers>Update from Repo> clicktasmota-connect> Select all files > TickPublish> thenExecute Update
For Tasmota (Connect) to function correctly, please make sure you install the SmartApp and all Device Handlers.
- Sign in to SmartThings IDE: https://account.smartthings.com/login
- SmartApp Installation
- Under
My SmartApps> chooseNew SmartApp>From Code - Paste the SmartApp code [link] into the text box
- Click "Save" and "Publish" it to yourself.
- Under
- Device Handler Installation
- Click on this [link] to obtain the device handlers. For each of the device handlers, do the following:
- Under
My Device Handlers> chooseCreate New Device Handler>From Code - Paste the device code into the text box
- Click "Save" and "Publish" it to yourself.
- For SmartApp and Device Handler updates, perform the same steps in manual installation.
- Open your SmartThings mobile app
- Under
SmartApps, selectTasmota (Connect) - Tap
New Tasmota Device, and select the Tasmota device you want to add - Fill in the
IP address,username(optional),password(optional) of the Tasmota device
It should work for most switches, lights (CCT, RGB, RGBW), dimmers, relays, plugs, power strips, sockets, wall outlets, fan controllers, RF motion/contact sensors, RF remote controllers, IR bridges and RF bridges listed in the Tasmota Device Templates Repository.
If your Tasmota device is not listed below, choose a Generic device that is similar to your Tasmota device.
- Generic Switch (1,2,3,4,5,6,7,8CH) - No Power Monitoring
- Generic Metering Switch (1,2,3,4,5,6,7,8CH) - Power Monitoring
- Generic Dimmer Switch
- Generic IR Bridge
- Generic Light (CT)
- Generic Light (RGB)
- Generic Light (RGBW)
- Sonoff Basic
- Sonoff RF
- Sonoff TH
- Sonoff Dual & Dual R2
- Sonoff Pow & Pow R2
- Sonoff 4CH & 4CH Pro
- Sonoff S20, S26
- Sonoff S31
- Sonoff Touch, T1 (1,2,3CH)
- Sonoff RF Bridge
- Sonoff iFan02, iFan03
A Virtual Device uses a RF or IR bridge to control or read your dumb RF / IR devices.
| Virtual Device | Usage |
|---|---|
| Virtual Switch | Add a SmartThings generic switch that can be controlled by a RF / IR bridge (e.g. Sonoff RF Bridge). |
| Virtual Shade | Add a SmartThings shade/blind that can be controlled by a RF / IR bridge (e.g. Sonoff RF Bridge). |
| Virtual Button | Add RF/IR remote controller 1/2/4/6-button as SmartThings remote controller button. The Virtual 1-button has additional capabilities:
|
| Virtual Contact Sensor | Add a RF contact sensor |
| Virtual Motion Sensor | Add a RF motion sensor |
| Virtual Air Conditioner | Add a IR virtual air conditioner (supported AC vendor/brands) (optional) Use a contact sensor to sense if the AC is ON or OFF. |
-
Choose a RF or IR Bridge
-
Enter the Tasmota command to send for "ON" and "OFF"
For RF, it has to be one of these formats
Backlog RfSync <value>; RfLow <value>; RfHigh <value>; RfCode <value>Backlog RfRaw <value>; RfRaw 0Note: RFRaw requires Portisch Firmware
-
Optionally, enable
State trackingto listen for RF codes (e.g. from RF remote) to simulate a Stateful device -
If you enable
State tracking, enter the code that represents the "ON" and "OFF" stateIn the example below, the code is 70C70F
- "RfReceived":{"Sync":7110,"Low":210,"High":660,"Data":"70C70F","RfKey":"None"}
-
Choose a RF Bridge
-
Enter the RFReceived Data that represents "OPEN", "CLOSE", "ACTIVE", "INACTIVE" or button state
In the example below, the code is 70C70F
- "RfReceived":{"Sync":7110,"Low":210,"High":660,"Data":"70C70F","RfKey":"None"}
- Choose an IR Bridge
- Select air conditioner brand (supported AC vendor/brands)
- (Optional) Select a contact sensor to sense if the AC is ON or OFF
- Verify the IP address is correct and you are able to access your device via the IP address.
- If you have added this device using other developer device type handler (DTH), please delete the device.
- If the device is still not responding, look at the Tasmota Console so that you can see exactly what is happening. e.g. The actions (on/off) that you've called in SmartThings App didn't appear in the Console, it's likely the SmartThings hub is unable to access the device.
- Ensure your Tasmota devices and SmartThings hub are assigned with static IP addresses.
Please see under RF Bridge & IR Remote - https://tasmota.github.io/docs/Commands/
- Sign in to SmartThings IDE: https://account.smartthings.com/login
- Verify that you have installed the codes in the correct SmartThings IDE Shard.
- If you don't see your current devices under "My Devices", you are probably on the wrong shard.
- Please make sure you install the SmartApp and all Device Handlers, and update the codes regularly to receive the latest features
- Please make sure you install the SmartApp and all Device Handlers, and update the codes regularly to receive the latest features
Please use SmartThings Community for feedback and questions.
If you find Tasmota (Connect) SmartApp useful and would like to support our efforts, please consider making a donation via Paypal. Thanks for your support.
GPL-3.0