remaned ta10 to tarzan

docs/automaticStartup.md

@@ -4,7 +4,7 @@ In this section we present an example distribution for use in a systemd environm
 
 ## Example File Layout (Linux/BSD)
 
-One possible layout is to put everything in `/opt/jane`.  Note, `janeserver` and `ta10` are put together just for convenience. Set permissions accordingly.
+One possible layout is to put everything in `/opt/jane`.  Note, `janeserver` and `tarzan` are put together just for convenience. Set permissions accordingly.
 
 ```bash
 $ pwd
@@ -13,7 +13,7 @@ $ ls -l
 total 27364
 -rw-rw-r-- 1 ian ian      706 tammi  21 13:01 config.yaml
 -rwxrwxr-x 1 ian ian 19448208 tammi  21 13:00 janeserver
--rwxrwxr-x 1 ian ian  8554460 tammi  21 13:02 ta10
+-rwxrwxr-x 1 ian ian  8554460 tammi  21 13:02 tarzan
 -rw-rw-r-- 1 ian ian     1440 tammi  21 13:01 temporary.crt
 -rw-rw-r-- 1 ian ian     1704 tammi  21 13:01 temporary.key
 ```
@@ -44,19 +44,19 @@ Ensure the `config.yaml` is properly configured for your system and installation
 Start with `systemctl start jane.service` and enable with `systemctl enable jane.service`. Use `journalctl -xe` to check startup and possible errors.
 
 
-## TA10 and 
+## Tarzan 
 
-This is how to start ta10. It works on BSDs, Linux, Windows and quite a few others depending upon the binary. Instructions here for starting with systemd and rc.3 which'll probably transfer between many Linux and BSD installations. Windows seems to work too
+This is how to start tarzan. It works on BSDs, Linux, Windows and quite a few others depending upon the binary. Instructions here for starting with systemd and rc.3 which'll probably transfer between many Linux and BSD installations. Windows seems to work too
 
-### Linxu with Systemd 
+### Linux with Systemd 
 
-Place the following systemd configuration in `/etc/systemd/system`  as `ta10.service`
+Place the following systemd configuration in `/etc/systemd/system`  as `tarzan.service`
 
-Note ta10 may require root to run. Take note of any security aspects.
+Note tarzan may require root to run. Take note of any security aspects.
 
 ```
 [Unit]
-Description=TA10 Trust Agent
+Description=Tarzan Trust Agent
 After=network.target
 StartLimitIntervalSec=0
 
@@ -65,28 +65,28 @@ Type=simple
 Restart=always
 RestartSec=1
 User=root
-ExecStart=/opt/jane/ta10
+ExecStart=/opt/jane/tarzan
 
 [Install]
 WantedBy=multi-user.target
 ```
 
-Start with `systemctl start ta10.service` and enable with `systemctl enable ta10.service`. Use `journalctl -xe` to check startup and possible errors.
+Start with `systemctl start tarzan.service` and enable with `systemctl enable tarzan.service`. Use `journalctl -xe` to check startup and possible errors.
 
 ### Windows
 
-This is possible. In the respository in `dist` is a file `ta10TrustAgent.xml` which provides some hints on this.
+This is possible. In the respository in `dist` is a file `TarzanTrustAgent.xml` which provides some hints on this.
 
 ### BSD (rc.d)
 
-Yes too. This script placed in `/etc/rc.d` called `ta10` works for startup, at least on my OpenBSD VM:
+Yes too. This script placed in `/etc/rc.d` called `tarzan` works for startup, at least on my OpenBSD VM:
 
 ```
 #!/bin/sh
 #
-# $OpenBSD: ta10
+# $OpenBSD: tarzan
 
-daemon="/opt/jane/ta10"
+daemon="/opt/jane/tarzan"
 
 . /etc/rc.d/rc.subr
 

docs/compiling.md

@@ -9,7 +9,7 @@ The instructions presented here have been tested in Ubuntu 22.04 om AMD64.
       + [Install SGX SDK and Edgeless libraries](#install-sgx-sdk-and-edgeless-libraries)
       + [Building ](#building)
       + [Optional BUILD flag](#optional-build-flag)
-   * [Compiling TA10](#compiling-ta10)
+   * [Compiling tarzan](#compiling-tarzan)
 
 
 <!-- TOC --><a name="compiling"></a>
@@ -58,30 +58,30 @@ If you wish to set a build flag, then specify  as part of the `ldflags -X` optio
 . /opt/edgelessrt/share/openenclave/openenclaverc && GOOS=linux GOARCH=amd64 go build -ldflags="-X 'main.BUILD=123'" -o janeserver
 ```
 
-<!-- TOC --><a name="compiling-ta10"></a>
-## Compiling TA10
+<!-- TOC --><a name="compiling-tarzan"></a>
+## Compiling tarzan
 
-*MAKE SURE* you are in the `ta10` directory.  TA10 is much simpler than janeserver and requires just compilation. For your local operating system and architecture you can remove the `GOOS` and `GOARCH` variables, for example as shown below. The `strip` command is optional but it does reduce the binary size a little.
+*MAKE SURE* you are in the `tarzan` directory.  tarzan is much simpler than janeserver and requires just compilation. For your local operating system and architecture you can remove the `GOOS` and `GOARCH` variables, for example as shown below. The `strip` command is optional but it does reduce the binary size a little.
 
 ```bash
 go get -u
 go mod tidy
-go build -o ta10
-strip ta10
+go build -o tarzan
+strip tarzan
 ```
 
 For other architectures, use `go tool dist list` for a list of operating system and architecture options. Listed below are a few common options - and we like to append this to the binary name when we're generating a few of these for the devices we have (remeber amd64 is 64-bit Intel/AMD x86 based chips, eg: Xeons, i9's, i7's, Threaripper etc etc)
 
 ```bash
-GOOS=linux GOARCH=arm go build -o ta10_arm                 # eg: Pi 3s
-GOOS=linux GOARCH=arm64 go build -o ta10_arm64             # eg: Pi 4, 5s in 64-bit mode (also 3's I think)
-GOOS=windows GOARCH=amd64 go build -o ta10_win             # eg: Pretty much every Win10, Win11 machine
-GOOS=plan9 GOARCH=386 go build -o ta10_belllabs            # Because I was in Bell Labs and plan9 was freaking cool! The real Unix next!
-GOOS=linux GOARCH=s390x go build -o ta10_mainframe         # Because you either have an z-Series in the basement or Hercules
-GOOS=solaris GOARCH=amd64 go build -o ta10_solaris         # I still mourn the lost of the SparcStation and UltraSparcs, RIP Sun.
-GOOS=opebsd GOARCH=amd64 go build -o ta10_openbsd          # BSD for security (netbsd and freebsd are supported too)
-GOOS=darmin GOARCH=arm64 go build -o ta10_mac              # For the Apple people out there...no TPM, but if you figure out attesting a T2 let me know
-GOOS=aix GOARCH=ppc64 go build -o ta10_aix                 # If you have an AIX box, again let me know...DRTM is supported during boot and a TPM too?
-GOOS=wasip1 GOARCH=wasm go build -o ta10_aix                # Web Assembly works too...never tried this myself, so I wonder how it works
+GOOS=linux GOARCH=arm go build -o tarzan_arm                 # eg: Pi 3s
+GOOS=linux GOARCH=arm64 go build -o tarzan_arm64             # eg: Pi 4, 5s in 64-bit mode (also 3's I think)
+GOOS=windows GOARCH=amd64 go build -o tarzan_win             # eg: Pretty much every Win10, Win11 machine
+GOOS=plan9 GOARCH=386 go build -o tarzan_belllabs            # Because I was in Bell Labs and plan9 was freaking cool! The real Unix next!
+GOOS=linux GOARCH=s390x go build -o tarzan_mainframe         # Because you either have an z-Series in the basement or Hercules
+GOOS=solaris GOARCH=amd64 go build -o tarzan_solaris         # I still mourn the lost of the SparcStation and UltraSparcs, RIP Sun.
+GOOS=opebsd GOARCH=amd64 go build -o tarzan_openbsd          # BSD for security (netbsd and freebsd are supported too)
+GOOS=darmin GOARCH=arm64 go build -o tarzan_mac              # For the Apple people out there...no TPM, but if you figure out attesting a T2 let me know
+GOOS=aix GOARCH=ppc64 go build -o tarzan_aix                 # If you have an AIX box, again let me know...DRTM is supported during boot and a TPM too?
+GOOS=wasip1 GOARCH=wasm go build -o tarzan_aix                # Web Assembly works too...never tried this myself, so I wonder how it works
 ```
 

docs/docker.md

@@ -119,6 +119,6 @@ The following services are running and available externally by default
 
 
 
-## TA10
+## TARZAN
 
-Refer back to [compiling](compiling.md) to understand how to build TA10. This normally doesn't need to be run in a container (and we don't really recommend it anyway)
+Refer back to [compiling](compiling.md) to understand how to build tarzan. This normally doesn't need to be run in a container (and we don't really recommend it anyway)

docs/running.md

@@ -51,17 +51,17 @@ X3270 service listening on port 3270
 If that works, point your browser at the machine where this is running and port 8540.
 
 
-# Running TA10
+# Running tarzan
 
-Running TA10 is simple, just use
+Running tarzan is simple, just use
 
 ```bash
-./ta10
+./tarzan
 ```
 
 ```bash
 +========================================================================================
-|  TA10 version - Starting
+|  tarzan version - Starting
 |   + linux O/S on amd64
 |   + version v0.1, build not set
 |   + session identifier is 19a14951-76c3-4641-b9ac-fa65683e5c36
@@ -71,15 +71,15 @@ Running TA10 is simple, just use
 ⇨ http server started on [::]:8530
 ```
 
-If you are running on Linux and need access to files such as the UEFI log file then you will need to run ta10 as sudo.
+If you are running on Linux and need access to files such as the UEFI log file then you will need to run tarzan as sudo.
 
-TA10 requires access to the TPM device, eg `/dev/tpm0` on Linux (Windows handles this internally), and so whichever user ta10 is running as needs access to that device.
+tarzan requires access to the TPM device, eg `/dev/tpm0` on Linux (Windows handles this internally), and so whichever user tarzan is running as needs access to that device.
 
 ```bash
-sudo ./ta10
+sudo ./tarzan
 ```
 
-Read the section on advanced TA10 usage.
+Read the section on advanced tarzan usage.
 
 # JANESERVER Configuration File
 
@@ -162,22 +162,22 @@ keylime:
   apiurl: https://127.0.0.1:30000/keylime                   #CHANGE ME
 ```
 
-# Advanced TA10 - Here be a good way to open your system to every hacker ever
+# Advanced tarzan - Here be a good way to open your system to every hacker ever
 
-TA10 CURRENTLY starts all the services, ie: it will happily offer TPM, IMA, UEFI services etc, even if these are not available. In a later version these will have be switched on specifically, but don't worry about this.
+tarzan CURRENTLY starts all the services, ie: it will happily offer TPM, IMA, UEFI services etc, even if these are not available. In a later version these will have be switched on specifically, but don't worry about this.
 
-TA10 can read UEFI and IMA logs in non-standard places, but in order to do this, the element description in the Jane's database would have to refer to those specifically. TA10 by default operates in a *safe* mode where it will only use the standard locations in Linux's securityfs. You can turn off this mode:
+tarzan can read UEFI and IMA logs in non-standard places, but in order to do this, the element description in the Jane's database would have to refer to those specifically. tarzan by default operates in a *safe* mode where it will only use the standard locations in Linux's securityfs. You can turn off this mode:
 
 ```bash
-sudo ./ta10 -unsafe=true
+sudo ./tarzan -unsafe=true
 ```
 
 which responds with
 
 ```bash
-$ sudo ./ta10 -unsafe=true
+$ sudo ./tarzan -unsafe=true
 +========================================================================================
-|  TA10 version - Starting
+|  tarzan version - Starting
 |   + linux O/S on amd64
 |   + version v0.1, build not set
 |   + session identifier is 4e85a08d-7d1c-450d-9a7a-659f29ab8380
@@ -186,7 +186,7 @@ $ sudo ./ta10 -unsafe=true
 
 
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-TA10 is running in UNSAFE file access mode.  Unsafe is set to true
+tarzan is running in UNSAFE file access mode.  Unsafe is set to true
 Requests for log files, eg: UEFI, IMA, that supply a non default location will happily read that file
 This is a HUGE security issue. YOU HAVE BEEN WARNED
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

docs/security.md

@@ -8,8 +8,8 @@ Read carefully:
    * TO SAVE YOURSELF, SET THE use http FIELDS TO true in the configuration file.
    * That isn't secure either...  
    * GENERATE YOUR OWN KEYS AND KEEP THEM SECURE and use https
-   * TA10 runs over HTTP !!!!   
-   * DO NOT USE TA10 IN UNSAFE MODE !!! (Even if you're not root!)
+   * Tarzan runs over HTTP !!!!   
+   * DO NOT USE Tarzan IN UNSAFE MODE !!! (Even if you're not root!)
    * Jane signs claims, results, sessions etc...the keys are randomly generated each him the system is started and aren't recorded anywhere. There is some code to talk PKCS#11 and has been tested with a YubiHSM but it isn't used. Don't rely upon it, I haven't tested it and it is just placeholder at this time. Yes, I'll get arund to writing the proper functionality real soon now...volunteers?
    * Did I tell you that the temporary.key and temporary.crt have been on github and gitlab pages for years; also in the forks and elsewhere...?