Home
Ivport Stereo CM is breakout board that you can plug a Raspberry Pi Compute Modules into. It comes with two Camera ports and enables you to use stereo recording and capturing modes simultaneously at full FPS and syncronized frames unlike Ivport Multiplexer. It has also 10/100M Ethernet, dual USB 2.0 ports, Classic Raspberry Pi GPIO header, HDMI output, microSD slot and PoE (Power over Ethernet) support. It is also compatible with sorts of Raspberry Pi HATs.
Raspberry Pi Compute Module, camera modules, camera ribbon cables, and power cable are needed.
- Compatible Camera Modules
- Raspberry Pi Camera Module V1.3 (OV5647 sensor)
- Raspberry Pi Camera Module V2 (Sony IMX 219 sensor)
- Compatible Compute Modules
- Raspberry Pi CM1
- Raspberry Pi CM3 (eMMC equipped)
- Raspberry Pi CM3 Lite
- Raspberry Pi CM3+ (eMMC equipped)
- Raspberry Pi CM3+ Lite
Video
- 2 × 15-pin MIPI Camera Serial Interface
- 1 × full size HDMI
- Classic Raspberry Pi 40-pin GPIO header
- For connecting sorts of Raspberry Pi HATs
- 10/100 BaseT Ethernet socket
- 2 x USB 2.0 Connector
- Micro SD format for loading operating system and data storage
- 5V/2A DC via JST connector (USB to JST cable comes together)
- Power over Ethernet (PoE)–enabled (requires separate Ivport Stereo PoE HAT)
- 5V DC via GPIO header
- Rasbian
There are several precautions that need to me taken when working with the expansion headers to prevent damage to the board.
ALL VOLTAGE LEVELS ARE 3.3V MAX. APPLICATION OF 5V TO ANY I/O PIN WILL DAMAGE THE PROCESSOR AND VOID THE WARRANTY.
1) Do not apply any voltages to any GPIO pins when the board is not powered on.
2) If you are applying signals from other boards into the expansion headers, make sure you power the board up after you power up the Ivport Stereo CM or make the connections after power is applied on both boards.
If you have questions on any of this, you can contact bilgi@ivmech.com.