Azure Resource Manager QuickStart Templates

This repo contains all currently available Azure Resource Manager templates contributed by the community. A searchable template index is maintained at Azure Resource Manager Templates.

The following information is relevant to get started with contributing to this repository.

Contribution guide. Describes the minimal guidelines for contributing.
Best practices. Best practices for improving the quality of your template design.
Git tutorial. Step by step to get you started with Git.
Useful Tools. Useful resources and tools for Azure development.

Deploying Samples

You can deploy these samples directly through the Azure Portal or by using the scripts supplied in the root of the repo.

To deploy a sample using the Azure Portal, click the Deploy to Azure button found in the README.md of each sample.

To deploy the sample via the command line (using Azure PowerShell or the Azure CLI 1.0) you can use the scripts below.

Simply execute the script and pass in the folder name of the sample you want to deploy.

For example:

PowerShell

.\Deploy-AzureResourceGroup.ps1 -ResourceGroupLocation 'eastus' -ArtifactStagingDirectory '[foldername]'

Bash

Please ensure that you have node and npm, jq and azure-cli installed.

./azure-group-deploy.sh -a [foldername] -l eastus

If you see the following error: "syntax error near unexpected token `$'in\r''", run this command: 'dos2unix azure-group-deploy.sh'.
If you see the following error: "jq: command not found", run this command: "sudo apt install jq".
If you see the following error: "node: not found", install node and npm.
If you see the following error: "azure-group-deploy.sh is not a command", make sure you run "chmod +x azure-group-deploy.sh".

Uploading Artifacts

If the sample has artifacts that need to be "staged" for deployment (Configuration Scripts, Nested Templates, DSC Packages) then set the upload switch on the command. You can optionally specify a storage account to use, if so the storage account must already exist within the subscription. If you don't want to specify a storage account one will be created by the script or reused if it already exists (think of this as "temp" storage for AzureRM).

PowerShell (explicit staging)

.\Deploy-AzureResourceGroup.ps1 -ResourceGroupLocation 'eastus' -ArtifactStagingDirectory '201-vm-custom-script-windows' -UploadArtifacts

Bash (explicit staging)

./azure-group-deploy.sh -a [foldername] -l eastus -u

Contribution Guide

To make sure your template is added to Azure.com index, please follow these guidelines. Any templates that are out of compliance will be added to the blocklist and not be indexed on Azure.com

Files, folders and naming conventions

Every deployment template and its associated files must be contained in its own folder. Name this folder something that describes what your template does. Usually this naming pattern looks like appName-osName or level-platformCapability (e.g. 101-vm-user-image)

Required - Numbering should start at 101. 100 is reserved for things that need to be at the top.
Protip - Try to keep the name of your template folder short so that it fits inside the Github folder name column width.

Github uses ASCII for ordering files and folder. For consistent ordering create all files and folders in lowercase. The only exception to this guideline is the README.md, that should be in the format UPPERCASE.lowercase.
Include a README.md file that explains how the template works.

Guidelines on the README.md file below.

The deployment template file must be named azuredeploy.json.
There should be a parameters file named azuredeploy.parameters.json.

Use defaultValues in the azuredeploy.json template whenever there is a value that will work for all users. The parameters file, should contain only GEN* values for generating values for a test deployment. Do NOT use values that require changes by the user for a successful deployment (e.g. changeme).

The template folder must contain a metadata.json file to allow the template to be indexed on Azure.com.

Guidelines on the metadata.json file below.

The custom scripts that are needed for successful template execution must be placed in a folder called scripts.
Linked templates must be placed in a folder called nested.
Images used in the README.md must be placed in a folder called images.
Any resources that need to be setup outside the template should be named prefixed with existing (e.g. existingVNET, existingDiagnosticsStorageAccount and provision using a prereqs template.

Pull Request Guidelines

A single PR should reference a single template. There shouldn't be multiple templates being referenced in a single PR
For each PR created the contributor needs to acknowledge the Contribution and Best Practices Guide.
Each PR will run through the arm-ttk to ensure best practices
Part of the pre-merge checks will be a deployment to both the Public and USGov clouds

README.md

The README.md describes your deployment. A good description helps other community members to understand your deployment. The README.md uses Github Flavored Markdown for formatting text. If you want to add images to your README.md file, store the images in the images folder. Reference the images in the README.md with a relative path (e.g. ![alt text](images/namingConvention.png "Files, folders and naming conventions")). This ensures the link will reference the target repository if the source repository is forked. A good README.md contains the following sections

Deploy to Azure button
Visualize button
Description of what the template will deploy
Tags, that can be used for search. Specify the tags comma separated and enclosed between two back-ticks (e.g Tags: cluster, ha, sql)
*Optional: Prerequisites
*Optional: Description on how to use the application
*Optional: Notes

Do not include the parameters or the variables of the deployment script. We render this on Azure.com from the template. Specifying these in the README.md will result in duplicate entries on Azure.com.

You can download a sample README.md for use in your deployment scenario. The sample README.md also contains the code for the Deploy to Azure and Visualize buttons, that you can use as a reference.

metadata.json

A valid metadata.json must adhere to the following structure

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/...",
  "itemDisplayName": "60 char limit",
  "description": "1000 char limit",
  "summary": "200 char limit",
  "githubUsername": "<e.g. bmoore-msft>",
  "dateUpdated": "<e.g. 2015-12-20>",
  "type": "QuickStart"
}

schema

Proper metadata schema

itemDisplayName

Title of the sample

description

Cannot contain HTML This is used for the template description on the Azure.com index template details page

summary

This is shown for template description on the main Azure.com template index page

githubUsername

This is the username of the original template author. Do not change this
This is used to display template author and Github profile pic in the Azure.com index

dateUpdated

Must be in yyyy-mm-dd format.
The date must not be in the future to the date of the pull request

type

Type of template; in this case, QuickStart

environments

An array of the clouds supported by the sample, if omitted all clouds should be supported and will be tested. See the schema for the allowed values.

Cloud Support

If the sample does not support all clouds add the environments property to metadata.json indicating the clouds that are supported. If omitted, the following is the default value of the environments property.

{
  ...
  "environments": [
    "AzureCloud",
    "AzureUSGovernment"
  ]
}

Validation Type

If the sample cannot be automatically tested (e.g. tenant level deployments) set the validation type to "Manual", the default is "Automatic".

Cloud Specific Parameter Files

If the sample needs separate parameter files for each cloud you can add each to the sample:

Cloud	Parameter Filename
Azure Public Cloud	azuredeploy.parameters.json
Azure US Government Cloud	azuredeploy.parameters.us.json

If only one is provided it will be used for testing in all clouds.

Azure DevOps CI

We have automated template validation through Azure DevOps CI. These builds can be accessed by clicking the 'Details' link at the bottom of the pull-request dialog. This process will ensure that your template conforms to all the rules mentioned above and will also deploy your template to our test subscription.

Parameters File Placeholders

To ensure your template passes, special placeholder values are required when deploying a template, depending on how the parameter is used. For static values you can see the actual value used in the .config.json file in this repo.

GEN-UNIQUE[-N] - use this for a new globally unique resource name. The value will always be alpha numeric value with a length of [N], where [N] can be any number from 3 to 32 inclusive. The default length when N is not specified is 18.
GEN-SSH-PUB-KEY - use this if you need an SSH public key
GEN-PASSWORD - use this if you need an azure-compatible password for a VM
GEN-GUID - use this to generate a GUID

Quickstart CI engine provides few pre-created azure components which can be used by templates for automated validation. This includes a key vault with sample SSL certificate stored, specialized and generalized Windows Server VHD's, a custom domain and SSL cert data for Azure App Service templates and more.

Virtual Network Related placeholders:

GEN-VNET-NAME - the name of the virtual network
GEN-VNET-RESOURCEGROUP-NAME - the name of the resource group for the virtual network
GEN-VNET-SUBNET1-NAME - the name of subnet-1
GEN-VNET-SUBNET2-NAME - the name of subnet-2

Key Vault Related placeholders:

GEN-KEYVAULT-NAME - the name of the keyvault
GEN-KEYVAULT-RESOURCEGROUP-NAME - the name of the resource group for the keyvault
GEN-KEYVAULT-FQDN-URI - the FQDN URI of the keyvault
GEN-KEYVAULT-RESOURCE-ID - the resource ID of the keyvault
GEN-KEYVAULT-PASSWORD-SECRET-NAME - the secret name for a password reference
GEN-KEYVAULT-PASSWORD-REFERENCE - the reference parameter used to retrieve a KeyVault Secret (use "reference" for the property name, not "value")
GEN-KEYVAULT-SSL-SECRET-NAME - the name of the secret where the sample SSL cert is stored in the keyvault
GEN-KEYVAULT-SSL-SECRET-URI - the URI of the sample SSL cert stored in the test keyvault
GEN-KEYVAULT-ENCRYPTION-KEY - the name of the sample encryption key stored in keyvault, used for disk encryption
GEN-KEYVAULT-ENCRYPTION-KEY-URI - the URI of the sample encryption key
GEN-KEYVAULT-ENCRYPTION-KEY-VERSION - the secret version of the sample encryption key
GEN-SF-CERT-URL - the URL of the sample service fabric certificate stored in keyvault
GEN-SF-CERT-THUMBPRINT - the thumbprint of the sample service fabric certificate stored in keyvault

Existing VHD related placeholders:

GEN-SPECIALIZED-WINVHD-URI - URI of a specialized Windows VHD stored in an existing storage account
GEN-GENERALIZED-WINVHD-URI - URI of a generalized Windows VHD stored in an existing storage account
GEN-GENERALIZED-WINVHD-FILENAME - the filename of the existing VHD
GEN-DATAVHD-URI - URI of a sample data disk VHD stored in an existing storage account
GEN-VHDSTORAGEACCOUNT-NAME - Name of storage account in which the VHD's are stored
GEN-VHDRESOURCEGROUP-NAME - Name of resource group in which the existing storage account having VHD's resides

Custom Domain & SSL Cert related placeholders:

GEN-CUSTOM-WEBAPP-NAME - placeholder for the name of azure app service where you'd want to attach custom domain
GEN-CUSTOM-FQDN-NAME - sample custom domain which can be added to an App Service
GEN-CUSTOM-DOMAIN-SSLCERT-THUMBPRINT - SSL cert thumbprint for the custom domain used in the custom FQDN
GEN-CUSTOM-DOMAIN-SSLCERT-PASSWORD - Password of the sample SSL cert
GEN-CUSTOM-DOMAIN-SSLCERT-PFXDATA - PFX data for the sample SSL cert
GEN-SELFSIGNED-CERT-PFXDATA - PFX data for a sample self signed cert
GEN-SELFSIGNED-CERT-CERDATA - CER data for a sample self signed cert
GEN-SELFSIGNED-CERT-PASSWORD - password for a sample self signed cert
GEN-SELFSIGNED-CERT-DNSNAME - DNS name for a sample self signed cert

Custom Domain & SSL Cert related placeholders:

GEN-FRONTDOOR-NAME - placeholder for the frontdoor name reserved for CI/CD
GEN-FRONTDOOR-CUSTOM-HOSTNAME - custom hostname with CNAME record mapped for the GEN-FRONTDOOR-NAME value

AppConfiguration Store related placeholders:

GEN-APPCONFIGSTORE-NAME - placeholder for the Microsoft.AppConfiguration/configurationStores
GEN-APPCONFIGSTORE-RESOURCEGROUP-NAME - resource group name for the AppConfig store
GEN-APPCONFIGSTORE-KEY1 - sample key/value stored in the AppConfig store, label is "template"
GEN-APPCONFIGSTORE-WINDOWSOSVERSION - sample key/value with a SKU Name for a windows server image, label is "template"
GEN-APPCONFIGSTORE-DISKSIZEGB - sample key/value with a disk size, in GB for a VM disk, label is "template"
GEN-USER-ASSIGNED-IDENTITY-NAME - name of a userAssigned MSI that has permission to the keyvault secrets
GEN-USER-ASSIGNED-IDENTITY-RESOURCEGROUP-NAME - resource group of the userAssigned identity for retrieving the resourceId
GEN-MACHINE-LEARNING-SP-OBJECTID - objectId of the Azure ML Service Principal in the tenant
GEN-COSMOS-DB-SP-OBJECTID - objectId of the Cosmos DB Service Principal in the tenant

Here's an example in an azuredeploy.parameters.json file:

{
"$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
"contentVersion": "1.0.0.0",
"parameters": {
 "newStorageAccountName":{
  "value": "GEN-UNIQUE"
 },
 "adminUsername": {
  "value": "GEN-UNIQUE"
 },
 "sshKeyData": {
  "value": "GEN-SSH-PUB-KEY"
 },
 "dnsNameForPublicIP": {
  "value": "GEN-UNIQUE-13"
 }
}

raw.githubusercontent.com Links

If you're making use of raw.githubusercontent.com links within your template contribution (within the template file itself or any scripts in your contribution) please ensure the following:

Ensure any raw.githubusercontent.com links which refer to content within your pull request points to https://raw.githubusercontent.com/Azure/azure-quickstart-templates/... and NOT your fork.
All raw.githubusercontent.com links are placed in your azuredeploy.json and you pass the link down into your scripts & linked templates via this top-level template. This ensures we re-link correctly from your pull-request repository and branch.
Although pull requests with links pointing to https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/... may not exist in the Azure repo at the time of your pull-request, at CI run-time, those links will be converted to https://raw.githubusercontent.com/{your_user_name}/azure-quickstart-templates/{your_branch}/.... Be sure to check the casing of https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/... as this is case-sensitive.

Note: You can find an example of relative linking in the nested template section of best practices document.

Template Pre-requisites

If your template has some pre-requisite such as existing Virtual Network or storage account, you should also submit pre-requisite template which deploys the pre-requisite components. CI automated validation engine automatically validates and deploy the pre-reqsuite template first and then deploys the main template. Following guidelines would help you in understanding how to leverage this capability.

Create a folder named prereqs in root of your template folder, Store pre-requisite template file, parameters file and artifacts inside this folder.
Store pre-requisite template file with name prereq.azuredeploy.json and parameters files with name prereq.azuredeploy.parameters.json
prereq.azuredeploy.json should deploy all required pre-existing resources by your main template and also output the values required by main template to leverage those resources. For example, if your template needs an existing VNET to be available prior to the deployment of main template, you should develop a pre-req template which deploys a VNET and outputs the VNET ID or VNET name of the virtual network created.
In order to use the values generated by outputs after deployment of prereq.azuredeploy.json, you will need to define parameter values as GET-PREREQ-OutputName. For example, if you generated a output with name vnetID in pre-req template, in order use the value of this output in main template, enter the value of corresponding parameter in main template parameters file as GET-PREREQ-vnetID
Check out this sample template to learn more
If the prereqs and the sample must be deployed to the same resource group add a file named .settings.json to the prereqs folder and put the following json snippet into the file (the comment is optional). Do this only if required by the sample, otherwise it may block customer deployment scenarios:

{
    "comment": "If prereqs need to be deployed to the same resourceGroup as the rest of the sample set the PrereqResourceGroupNameSuffix property to an empty string - otherwise you can omit this file",
    "PrereqResourceGroupNameSuffix": ""
}

Portal Deployments with createUiDefinition.json

You can optionally provide a UI Definition file to customize the deployment experience in the Azure portal. If one is provided, be sure to update the links in the readme file to include the createUiDefinition.json file in the url. See the sample-README.md file for an example. For a working sample see the 100-marketplace-sample QuickStart.

More information can be found at the links below - the documenation is tailored for the marketplace but the shcema and behavior for createUiDefinition is a generic construct for the Azure portal.

createUiDefinition Overview

createUiDefinition UI elements reference

testing createUiDefinition

Diagnosing Failures

If your deployment fails, check the details link of the Travis CI build, which will take you to the CI log. If the template deployment was attempted, you will get two top-level fields. The first is parameters which is the rendered version of your azuredeploy.parameters.json. This will include any replacements for GEN- parameters. The second is template which is the contents of your azuredeploy.json, after any raw.githubusercontent.com relinking. These values are the exact values you need to reproduce the error. Keep in mind, that depending on the resources allocated, it can take a few minutes for the CI system to cleanup provisioned resources.

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact opencode@microsoft.com with any additional questions or comments.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Azure Resource Manager QuickStart Templates

Deploying Samples

PowerShell

Bash

Uploading Artifacts

PowerShell (explicit staging)

Bash (explicit staging)

Contribution Guide

Files, folders and naming conventions

README.md

metadata.json

schema

itemDisplayName

description

summary

githubUsername

dateUpdated

type

environments

Cloud Support

Validation Type

Cloud Specific Parameter Files

Azure DevOps CI

Parameters File Placeholders

raw.githubusercontent.com Links

Template Pre-requisites

Portal Deployments with createUiDefinition.json

Diagnosing Failures

Files

README.md

Latest commit

History

README.md

File metadata and controls

Azure Resource Manager QuickStart Templates

Deploying Samples

PowerShell

Bash

Uploading Artifacts

PowerShell (explicit staging)

Bash (explicit staging)

Contribution Guide

Files, folders and naming conventions

README.md

metadata.json

schema

itemDisplayName

description

summary

githubUsername

dateUpdated

type

environments

Cloud Support

Validation Type

Cloud Specific Parameter Files

Azure DevOps CI

Parameters File Placeholders

raw.githubusercontent.com Links

Template Pre-requisites

Portal Deployments with createUiDefinition.json

Diagnosing Failures