Custom component for Home Assistant to interact with smart devices via the Overkiz platform.
Home Assistant 2022.2 will have the Overkiz (by Somfy) integration available in core. Most platforms are supported, except for siren, climate and water heater. Please use one of the integrations (core vs custom), to avoid calling Somfy's servers from two separate integrations and to avoid authentication issues.
- Atlantic Cozytouch
- Hitachi Hi Kumo
- Nexity Eugénie
- Rexel Energeasy Connect
- Somfy Connexoon IO
- Somfy Connexoon RTS
- Somfy TaHoma
- Somfy TaHoma Switch (instructions)
- Thermor Cozytouch
Multiple users reported that the TaHoma Switch will work with this integration after you create a scene in the TaHoma app and wait for a few hours. See #507 for context.
Most of the devices supported by your hub should be supported. If it is not the case or working correctly, have a look here.
You can install this integration via HACS or manually.
This integration is included in HACS. Search for the Overkiz (by Somfy) integration and choose install. Reboot Home Assistant and configure the 'Overkiz (by Somfy)' integration via the integrations page or press the blue button below.
Copy the custom_components/tahoma to your custom_components folder. Reboot Home Assistant and configure the 'Overkiz (by Somfy)' integration via the integrations page or press the blue button below.
After installation this integration adds new services to Home Assistant which can be used in automations. The new services are:
- Overkiz (by Somfy): Set cover position with low speed (tahoma.set_cover_position_low_speed, only added if supported by the device)
- Overkiz (by Somfy): My position (cover) (tahoma.set_cover_my_position)
- Overkiz (by Somfy): Execute command (tahoma.execute_command)
- Overkiz (by Somfy): Get execution history (tahoma.get_execution_history)
This component listen for events returned by Overkiz. In case of command failure, the event will forwarded to Home Assistant.
You can subscribe to the overkiz.event event type in Developer Tools/Events in order to examine the event data JSON for the correct parameters to use in your automations. For example, overkiz.event returns event data JSON similar to the following when your cover is blocked.
{
"event_type": "overkiz.event",
"data": {
"event_name": "ExecutionStateChangedEvent",
"failure_type_code": 106,
"failure_type": "CMDCANCELLED"
},
"origin": "LOCAL",
"time_fired": "2021-09-28T20:03:57.102478+00:00",
"context": {
"id": "92a84240d914b43ceaf1aee3249568f6",
"parent_id": null,
"user_id": null
}
}You can find the list of available failure_type here.
The logger integration lets you define the level of logging activities in Home Assistant. Turning on debug mode will show more information about unsupported devices in your logbook.
logger:
default: critical
logs:
custom_components.tahoma: debugIf your device is not visible in the device list of Home Assistant (/config/devices/dashboard), you need to turn on debug logging first. Copy your Home Assistant log (Configuration > Logs) and create a new issue.
If your device is listed in the device list, you need to turn on debug logging first. Copy your Home Assistant log (Configuration > Logs) and create a new issue.
In order to gather more information, you can use the tahoma.get_execution_history service which will print your execution history to the Home Assistant log. Run the commands via the official vendor app (e.g. TaHoma) and include your log in the issue.
If your hub (e.g. Somfy TaHoma) supports HomeKit natively, your setup code will be added as a sensor in Home Assistant. Look up your hub in Home Assistant and retrieve the value from the 'HomeKit Setup Code' sensor. You can now configure the HomeKit Controller integration in Home Assistant.