Releases: joeltroughton/QuadSMU_control
Releases · joeltroughton/QuadSMU_control
uSMU Control - v0.12
- Fixed forward+reverse scan button not releasing after a measurement has been performed
- Improved step delay logic to me more accurate for uSMU and nanoSMU hardware
- Changed acquisition logic to set voltage at the start of a cycle, and perform the measurement just before the end.
- For example, if the step time is 100ms, the voltage will be set at t=0, measurement requested at t=~80ms and the result returned at t=100ms. This helps return more accurate current readings when the SMU is sinking a lot of current (slew rate is decreased)
QuadSMU Control - Single channel
Pre-release version of QuadSMU control for single channel uSMU hardware
uSMU Control v0.11
This release changes 2 things:
-
Added a button in the "I-V Sweep" tab to measure both forward and reverse scan directions.
- "_fwd" and "_rev" are appended to the I-V file depending on the scan direction
-
Made it so that a I-V curve is performed immediately after starting the timer in the stability tab