Releases: kimchi-project/kimchi
3.0.0
Kimchi 3.0 depends on Wok 3.0! So make sure to have both of them properly installed in your system.
This release includes:
✔ Transition to Python3
✔ Bug fixes
We have worked hard to ensure that Kimchi runs well on the most popular Linux distributions including: Fedora 31, Ubuntu 19.10, Debian 10 and openSUSE LEAP 15.1. It uses standard Linux interfaces so it should run well on many other distributions too.
Quick guide on how to install
Fedora 31
# Install Wok
wget https://github.com/kimchi-project/wok/releases/download/3.0.0/wok-3.0.0-0.fc31.noarch.rpm
sudo dnf install -y ./wok-3.0.0-0.fc31.noarch.rpm
# Some Kimchi dependencies need to be installed via pip
sudo dnf install -y python3-pip
sudo -H pip3 install -r https://raw.githubusercontent.com/kimchi-project/kimchi/master/requirements-FEDORA.txt
# Install Kimchi
wget https://github.com/kimchi-project/kimchi/releases/download/3.0.0/kimchi-3.0.0-0.fc31.noarch.rpm
sudo dnf install -y ./kimchi-3.0.0-0.fc31.noarch.rpm
openSUSE LEAP 15.1
# Install Wok
wget https://github.com/kimchi-project/wok/releases/download/3.0.0/wok-3.0.0-0.opensuse.noarch.rpm
sudo zypper install --allow-unsigned-rpm -y ./wok-3.0.0-0.opensuse.noarch.rpm
# Some Kimchi dependencies need to be installed via pip
sudo zypper install -y python3-pip python3-devel parted-level gcc
sudo -H pip3 install -r https://raw.githubusercontent.com/kimchi-project/kimchi/master/requirements-OPENSUSE-LEAP.txt
# Install Kimchi
wget https://github.com/kimchi-project/kimchi/releases/download/3.0.0/kimchi-3.0.0-0.noarch.rpm
sudo zypper install --allow-unsigned-rpm -y ./kimchi-3.0.0-0.noarch.rpm
Ubuntu 19.10
# Install Wok
wget https://github.com/kimchi-project/wok/releases/download/3.0.0/wok-3.0.0-0.ubuntu.noarch.deb
sudo apt install -y ./wok-3.0.0-0.ubuntu.noarch.deb
# Some Kimchi dependencies need to be installed via pip
sudo apt install -y python3-pip pkg-config libnl-route-3-dev
sudo -H pip3 install -r https://raw.githubusercontent.com/kimchi-project/kimchi/master/requirements-UBUNTU.txt
# Install Kimchi
wget https://github.com/kimchi-project/kimchi/releases/download/3.0.0/kimchi-3.0.0-0.noarch.deb
sudo apt install -y ./kimchi-3.0.0-0.noarch.deb
Debian 10
# Install Wok
wget https://github.com/kimchi-project/wok/releases/download/3.0.0/wok-3.0.0-0.debian.noarch.deb
sudo apt install -y ./wok-3.0.0-0.debian.noarch.deb
# Some Kimchi dependencies need to be installed via pip
sudo apt install -y python3-pip pkg-config libnl-route-3-dev
sudo -H pip3 install -r https://raw.githubusercontent.com/kimchi-project/kimchi/master/requirements-UBUNTU.txt
# Install Kimchi
wget https://github.com/kimchi-project/kimchi/releases/download/3.0.0/kimchi-3.0.0-0.noarch.deb
sudo apt install -y ./kimchi-3.0.0-0.noarch.deb
Start the service and enjoy!
sudo service wokd start
Access it at https://localhost:8001
For troubleshooting, please, check:
2.5.0
Kimchi 2.5 depends on Wok 2.5! So make sure to have both of them properly installed in your system.
This release includes:
✔ Does not depend on Ginger Base anymore
✔ Remove OpenSans fonts need
✔ Move federation feature to Wok
✔ Bug fixes
We have worked hard to ensure that Kimchi runs well on the most popular Linux distributions including: Fedora 25, Ubuntu 17.04, openSUSE LEAP 42.2, and CentOS 7. It uses standard Linux interfaces so it should run well on many other distributions too.
Quick guide on how to install
Download Wok and Kimchi packages available below and:
Fedora and CentOS
sudo yum install <wok.rpm> <kimchi.rpm>
openSUSE
sudo zypper install <wok.rpm> <kimchi.rpm>
Ubuntu and Debian
sudo dpkg -i <wok.deb> <kimchi.deb>
# If your system DOES NOT HAVE all the dependencies installed, THE ABOVE COMMAND WILL FAIL.
# To fix it and install the dependencies needed, run:
sudo apt-get install -f
Start the service and enjoy!
sudo service wokd start
Access it at https://<machine-ip>:8001
For troubleshooting, check https://github.com/kimchi-project/wok/wiki/Troubleshooting
2.4.0
Kimchi 2.4 depends on Wok 2.4 and Ginger Base 2.3! So make sure to have both of them properly installed in your system.
This release includes:
✔ Initial s390x systems support
✔ Guest CPU hot plug and unplug
✔ Live migration over RDMA
✔ Live snapshot support
✔ Bug fixes
We have worked hard to ensure that Kimchi runs well on the most popular Linux distributions including: Fedora 25, Ubuntu 16.10, openSUSE LEAP 42.2, and CentOS 7. It uses standard Linux interfaces so it should run well on many other distributions too.
Quick guide on how to install
Download Wok, Kimchi and Ginger Base packages available below and:
Fedora and CentOS
sudo yum install <wok.rpm> <kimchi.rpm> <gingerbase.rpm>
openSUSE
sudo zypper install <wok.rpm> <kimchi.rpm> <gingerbase.rpm>
Ubuntu and Debian
sudo dpkg -i <wok.deb> <kimchi.deb> <gingerbase.deb>
# If your system DOES NOT HAVE all the dependencies installed, THE ABOVE COMMAND WILL FAIL.
# To fix it and install the dependencies needed, run:
sudo apt-get install -f
Start the service and enjoy!
sudo service wokd start
Access it at https://<machine-ip>:8001
For troubleshooting, check https://github.com/kimchi-project/wok/wiki/Troubleshooting
2.4.0-rc1
2.3.1
Kimchi 2.3.1 depends on Wok 2.3.1 and Ginger Base 2.2.2! So make sure to have both of them properly installed in your system.
We have worked hard to ensure that Kimchi runs well on the most popular Linux distributions including: Fedora 25, Ubuntu 16.10, openSUSE LEAP 42.2, and CentOS 7. It uses standard Linux interfaces so it should run well on many other distributions too.
Quick guide on how to install
Download Wok, Kimchi and Ginger Base packages available below and:
Fedora and CentOS
sudo yum install <wok.rpm> <kimchi.rpm> <gingerbase.rpm>
openSUSE
sudo zypper install <wok.rpm> <kimchi.rpm> <gingerbase.rpm>
Ubuntu and Debian
sudo dpkg -i <wok.deb> <kimchi.deb> <gingerbase.deb>
# If your system DOES NOT HAVE all the dependencies installed, THE ABOVE COMMAND WILL FAIL.
# To fix it and install the dependencies needed, run:
sudo apt-get install -f
Start the service and enjoy!
sudo service wokd start
Access it at https://<machine-ip>:8001
For troubleshooting, check https://github.com/kimchi-project/wok/wiki/Troubleshooting
Kimchi 2.1.0-rc1
Entering code freeze for 2.1.0 release