new: Version 0.9.2 realease!

CHANGELOG_auto.md

@@ -2,6 +2,12 @@
 
 ### New
 
+* Support to wait for GDB in qemu based boards added. [lcgamboa]
+
+* Add a new picsimlab_tool command line tool to upload firmware direct to PICSimLab (from platformio). [lcgamboa]
+
+* New spare part MCP23017 I2C IO expander. [lcgamboa]
+
 * New part \"Logic Block\" with logic functions: Not, Buffer, And, Nand, Or, Nor, Xor and Xnor. [lcgamboa]
 
 * Increase oscilloscope time scale up to 1s/div. [lcgamboa]
@@ -18,6 +24,20 @@
 
 ### Changes
 
+* Add support to set PWM frequency in STM32 Qemu based boards. [lcgamboa]
+
+* Adds support for showing in the status bar when waiting for GDB connection. [lcgamboa]
+
+* On fails make backup and load demonstrantion workspace to recover. [lcgamboa]
+
+* Add support to set baud rate in bitbang_uart (STM32 boards) [lcgamboa]
+
+* Add support to set baud rate in bitbang_uart (ESP32 and ESP32C3) [lcgamboa]
+
+* Add suport to set PWM frequency in bitbang_pwm (LEDC for ESP32, ESP32C3) [lcgamboa]
+
+* Add support to Read operations and interrupts in MCP23S17 spare part. [lcgamboa]
+
 * Gpboard updated to use gpsim-0.32.1. [lcgamboa]
 
 * Gpsim interface optimization to improve simulation performance. [lcgamboa]
@@ -26,6 +46,18 @@
 
 ### Fix
 
+* Fix BluePill Board onboard LED polarity. [lcgamboa]
+
+* Fix errors when setting time/date in RTC DS1307 and PFC8563. [lcgamboa]
+
+* Fix spare parts Buzzer crash on board reset. [lcgamboa]
+
+* Fix spare parts properties window position. [lcgamboa]
+
+* Fix state of input pins after reset in AVR based boards. [lcgamboa]
+
+* Fix RTC DS1307 support to 12h mode. [lcgamboa]
+
 * Fix Oscilloscope to use all SpareParts pins. [lcgamboa]
 
 * Fix gpboard configuration bits dump for PIC18F. [lcgamboa]

TODO.md

@@ -1,10 +1,10 @@
 ### FIXMEs
 | Filename | line # | FIXME |
 |:------|:------:|:------|
-| [src/picsimlab1.cc](src/picsimlab1.cc#L1063) | 1063 | remote control disabled |
+| [src/picsimlab1.cc](src/picsimlab1.cc#L1099) | 1099 | remote control disabled |
 | [src/boards/board_uCboard.cc](src/boards/board_uCboard.cc#L299) | 299 | NSTEP must be multiplied for 4 |
-| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1595) | 1595 | avr CONFIG size |
-| [src/devices/io_MCP23X17.cc](src/devices/io_MCP23X17.cc#L134) | 134 | only for BANK=0; |
+| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1601) | 1601 | avr CONFIG size |
+| [src/devices/io_MCP23X17.cc](src/devices/io_MCP23X17.cc#L132) | 132 | only for BANK=0; |
 | [src/parts/input_MPU6050.cc](src/parts/input_MPU6050.cc#L26) | 26 | remove lxrad |
 | [src/parts/input_encoder.cc](src/parts/input_encoder.cc#L173) | 173 | on slow speed output is not 90 degrees |
 | [src/parts/output_dcmotor.cc](src/parts/output_dcmotor.cc#L228) | 228 | on slow speed output is not 90 degrees |
@@ -19,9 +19,9 @@
 | [src/boards/board_PICGenios.cc](src/boards/board_PICGenios.cc#L238) | 238 | TEMP cooler must don't work with AQUE=0 |
 | [src/boards/board_RemoteTCP.cc](src/boards/board_RemoteTCP.cc#L176) | 176 | define pins |
 | [src/boards/bsim_gpsim.cc](src/boards/bsim_gpsim.cc#L168) | 168 | add VCC and GND pins |
-| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1210) | 1210 | default output value is not used yet (DOV) |
-| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1578) | 1578 | avr ID pointer |
-| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1600) | 1600 | avr ID size |
+| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1211) | 1211 | default output value is not used yet (DOV) |
+| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1584) | 1584 | avr ID pointer |
+| [src/boards/bsim_simavr.cc](src/boards/bsim_simavr.cc#L1606) | 1606 | avr ID size |
 | [src/devices/eth_w5500.cc](src/devices/eth_w5500.cc#L471) | 471 | add support to buffer size different of 2k |
 | [src/devices/lcd_ssd1306.cc](src/devices/lcd_ssd1306.cc#L123) | 123 | ssd1306 Scrolling Command Table |
 | [src/devices/lcd_ssd1306.cc](src/devices/lcd_ssd1306.cc#L134) | 134 | ssd1306 Continuous Vertical and Horizontal Scroll Setup |
@@ -32,10 +32,10 @@
 | [src/devices/ldd_max72xx.cc](src/devices/ldd_max72xx.cc#L78) | 78 | scan limit |
 | [src/devices/ldd_max72xx.cc](src/devices/ldd_max72xx.cc#L81) | 81 | shutdown |
 | [src/devices/ldd_max72xx.cc](src/devices/ldd_max72xx.cc#L88) | 88 | display test |
-| [src/devices/rtc_ds1307.cc](src/devices/rtc_ds1307.cc#L300) | 300 | int output |
-| [src/devices/rtc_pfc8563.cc](src/devices/rtc_pfc8563.cc#L282) | 282 | int output and countdown timer |
+| [src/devices/rtc_ds1307.cc](src/devices/rtc_ds1307.cc#L426) | 426 | int output |
+| [src/devices/rtc_pfc8563.cc](src/devices/rtc_pfc8563.cc#L288) | 288 | int output and countdown timer |
 | [src/parts/input_ds1621.cc](src/parts/input_ds1621.cc#L211) | 211 | set addr |
 | [src/parts/input_ds1621.cc](src/parts/input_ds1621.cc#L223) | 223 | implement Tout output |
-| [src/parts/other_IO_MCP23S17.cc](src/parts/other_IO_MCP23S17.cc#L395) | 395 | only write support implemented |
-| [src/parts/other_jumpers_ipc.cc](src/parts/other_jumpers_ipc.cc#L89) | 89 | get random |
+| [src/parts/other_IO_MCP23017.cc](src/parts/other_IO_MCP23017.cc#L411) | 411 | only write support implemented |
+| [src/parts/other_IO_MCP23S17.cc](src/parts/other_IO_MCP23S17.cc#L417) | 417 | only write support implemented |
 | [src/parts/output_dcmotor.cc](src/parts/output_dcmotor.cc#L175) | 175 | Add transfer funcion of dc motor |

VERSION

@@ -2,5 +2,5 @@ PACKAGE=picsimlab
 MAINVER=0
 MINORVER=9
 VERSION=0.9.2
-DATE=240824
-VERSION_STABLE=0.9.1
+DATE=241005
+VERSION_STABLE=0.9.2