This is the firmware required for STM32F10x-based flight controllers (naze32, flip32 etc...) to run ROSflight. ROSflight is a software architecture which uses a simple, inexpensive flight controller in tandem with a much more capable onboard computer running ROS. The onboard computer is given a high-bandwidth connection to the flight controller to access sensor information and perform actuator commands at high rates. This architectures provides direct control of lower-level functions via the embedded processor while also enabling more complicated functionality such as vision processing and optimization via the ROS middleware.
ROSflight is designed to accomplish the following objectives:
- Provide simpler and easier methods to develop and run advanced autopilot code on both multirotor and fixed-wing UAVs without extensive embedded programming.
- Robust software-in-the-loop (SIL) simulation tools for rapid testing and development of UAV code.
- The extensive use of peer-reviewed sources for all critical control and estimation algorithms complete with official documentation explaining all critical code.
- Prioritize high-bandwidth, low-latency communication with an onboard computer running ROS.
These objectives will allow researchers to more easily develop, test and field UAV code by prioritizing offboard control, good documentation and robust development tools.
Read our documentation located at docs.rosflight.org which includes a getting started guide .
For questions on getting started please join us at discuss.rosflight.org
Please submit an issue on this repository