samples: dect: add simple sample

Add simple dect sample.

Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>

doc/nrf/releases_and_maturity/releases/release-notes-changelog.rst

@@ -462,6 +462,12 @@ Debug samples
 
 |no_changes_yet_note|
 
+DECT samples
+------------
+
+* Added the :ref:`nrf_modem_dect_phy_hello` sample.
+
+
 Edge Impulse samples
 --------------------
 

samples/dect/dect_phy/hello_dect/CMakeLists.txt

@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(hello_dect)
+
+target_sources(app PRIVATE src/main.c)

samples/dect/dect_phy/hello_dect/Kconfig

@@ -0,0 +1,52 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config CARRIER
+	int "Carrier to use"
+	default 0
+	help
+	   The availability of the channels and the exact regulation to use them varies in different countries.
+	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+
+config NETWORK_ID
+	int "Network ID"
+	range 1 4294967295
+	default 91
+
+config MCS
+	int "MCS"
+	default 1
+	help
+	   The MCS impacts how much data can fit into each subslot.
+
+config TX_POWER
+	int "TX power"
+	range 0 11
+	default 11
+	help
+	   Transmission power, see table 6.2.1-3 of ETSI TS 103 636-4.
+
+config TX_TRANSMISSIONS
+	int "TX transmissions"
+	range 0 4294967295
+	default 30
+	help
+	   Transmissions before sample exits, use 0 to transmit forever.
+
+config RX_PERIOD_S
+	int "RX period"
+	default 5
+	help
+	   Receive window period.
+	   Time is given in seconds.
+
+module = DECT_PHY_HELLO
+module-str = DECT NR+ PHY Hello
+source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"
+
+menu "Zephyr Kernel"
+source "Kconfig.zephyr"
+endmenu

samples/dect/dect_phy/hello_dect/README.rst

@@ -0,0 +1,128 @@
+.. _nrf_modem_dect_phy_hello:
+
+nRF91x1: DECT NR+ PHY hello sample
+##################################
+
+.. contents::
+   :local:
+   :depth: 2
+
+The sample demonstrates how to set up a simple DECT NR+ application with the DECT PHY modem firmware.
+
+Requirements
+************
+
+The sample needs at least two nRF91x1 Development Kits.
+
+See :ref:`nrf91x1_ug_intro` for more details.
+
+.. note::
+
+   The :ref:`nrf_modem_dect_phy_simple` sample requires the DECT NR+ PHY modem firmware to run on the nRF91x1 modem core. Please contact our sales department to know more.
+
+.. include:: /includes/tfm.txt
+
+Overview
+********
+
+The sample shows a simple broadcast and reception of DECT NR+ messages between devices on a hard-coded channel.
+
+After initialization the devices will run a loop, transmitting a counter value before listening for incoming receptions. The time to listen is given by the :kconfig:option:`CONFIG_RX_PERIOD_S` Kconfig option.
+The loop is exited after a number of transmissions given by the :kconfig:option:`CONFIG_TX_TRANSMISSIONS` Kconfig option, or continue forever if the :kconfig:option:`CONFIG_TX_TRANSMISSIONS` Kconfig option is ``0``.
+
+Each device can be reset to run the sample again.
+
+Building and running
+********************
+
+.. |sample path| replace:: :file:`samples/modem_trace_flash`
+
+.. include:: /includes/build_and_run_ns.txt
+
+.. important::
+
+   DECT NR+ operates on free but regulated radio channels. The regulations and availability of the channels varies by countries and regions.
+   It is your responsibility to operate the devices according to the local regulation, both at the development site and the device operating regions.
+   If you are in the EU and US, you can use the ``overlay-eu.conf`` and ``overlay-us.conf``Kconfig overlays respectively.
+   Otherwise set the carrier using the :kconfig:option:`CONFIG_CARRIER` Kconfig option.
+
+Testing
+=======
+
+|test_sample|
+
+After programming the sample to your Development Kits, test it by performing the following steps:
+
+#. |connect_kit|
+#. |connect_terminal|
+#. Observe that the devices will transmit a counter value that is received by the other devices.
+#. After a given number of transmissions, observe that the devices shut down and exit the sample.
+
+Sample output
+=============
+
+The sample shows an output similar to the following:
+
+Device 1:
+
+.. code-block:: console
+
+   *** Booting nRF Connect SDK v3.5.99-ncs1 ***
+   [00:00:00.378,784] <inf> app: Dect NR+ PHY Hello sample started
+   [00:00:00.691,375] <inf> app: Dect NR+ PHY initialized, device ID: 12345
+   [00:00:00.691,406] <inf> app: Transmitting 0
+   [00:00:05.697,784] <inf> app: Transmitting 1
+   [00:00:10.704,193] <inf> app: Transmitting 2
+   [00:00:14.186,553] <inf> app: Received header from device ID 67890
+   [00:00:14.186,889] <inf> app: Received data (RSSI: -54.5): Hello DECT! 0
+   [00:00:15.710,571] <inf> app: Transmitting 3
+   [00:00:19.192,932] <inf> app: Received header from device ID 67890
+   [00:00:19.193,267] <inf> app: Received data (RSSI: -54.5): Hello DECT! 1
+   [00:00:20.716,949] <inf> app: Transmitting 4
+   ...
+   [00:02:24.352,661] <inf> app: Received header from device ID 67890
+   [00:02:24.352,996] <inf> app: Received data (RSSI: -54.5): Hello DECT! 26
+   [00:02:25.876,739] <inf> app: Transmitting 29
+   [00:02:25.876,831] <inf> app: Reached maximum number of transmissions (30)
+   [00:02:25.876,831] <inf> app: Shutting down
+   [00:02:25.893,554] <inf> app: Bye!
+
+Device 2:
+
+.. code-block:: console
+
+   *** Booting nRF Connect SDK v3.5.99-ncs1 ***
+   [00:00:00.407,287] <inf> app: Dect NR+ PHY Hello sample started
+   [00:00:00.719,238] <inf> app: Dect NR+ PHY initialized, device ID: 67890
+   [00:00:00.719,268] <inf> app: Transmitting 0
+   [00:00:02.254,211] <inf> app: Received header from device ID 12345
+   [00:00:02.254,547] <inf> app: Received data (RSSI: -54.5): Hello DECT! 3
+   [00:00:05.725,646] <inf> app: Transmitting 1
+   [00:00:07.260,620] <inf> app: Received header from device ID 12345
+   [00:00:07.260,955] <inf> app: Received data (RSSI: -54.5): Hello DECT! 4
+   ...
+   [00:02:10.885,284] <inf> app: Transmitting 26
+   [00:02:12.420,318] <inf> app: Received header from device ID 12345
+   [00:02:12.420,654] <inf> app: Received data (RSSI: -54.5): Hello DECT! 29
+   [00:02:15.891,693] <inf> app: Transmitting 27
+   [00:02:20.898,071] <inf> app: Transmitting 28
+   [00:02:25.904,449] <inf> app: Transmitting 29
+   [00:02:25.904,541] <inf> app: Reached maximum number of transmissions (30)
+   [00:02:25.904,571] <inf> app: Shutting down
+   [00:02:25.921,325] <inf> app: Bye!
+
+Dependencies
+************
+
+It uses the following `sdk-nrfxlib`_ libraries:
+
+* :ref:`nrfxlib:nrf_modem`
+
+It uses the following Zephyr libraries:
+
+* :ref:`zephyr:uart_api`
+
+
+In addition, it uses the following secure firmware components:
+
+* :ref:`Trusted Firmware-M <ug_tfm>`

samples/dect/dect_phy/hello_dect/overlay-eu.conf

@@ -0,0 +1 @@
+CONFIG_CARRIER=1702

samples/dect/dect_phy/hello_dect/overlay-us.conf

@@ -0,0 +1 @@
+CONFIG_CARRIER=1677

samples/dect/dect_phy/hello_dect/prj.conf

@@ -0,0 +1,6 @@
+CONFIG_NRF_MODEM_LIB=y
+
+CONFIG_NRF_MODEM_LINK_BINARY_DECT_PHY=y
+CONFIG_HWINFO=y
+
+CONFIG_LOG=y

samples/dect/dect_phy/hello_dect/sample.yaml

@@ -0,0 +1,9 @@
+sample:
+  name: Dect NR+ PHY Hello
+tests:
+  sample.nrf9161.dect_phy_hello:
+    build_only: true
+    integration_platforms:
+      - nrf9161dk_nrf9161_ns
+    platform_allow: nrf9161dk_nrf9161_ns
+    tags: ci_build