A Zcash Lightweight Client SDK for iOS
This is an alpha build and is currently under active development. Please be advised of the following:
- This code currently is not audited by an external security auditor, use it at your own risk
- The code has not been subjected to thorough review by engineers at the Electric Coin Company
- We are actively changing the codebase and adding features where/when needed
🔒 Security Warnings
- The Zcash iOS Wallet SDK is experimental and a work in progress. Use it at your own risk.
- Developers using this SDK must familiarize themselves with the current threat model, especially the known weaknesses described there.
ZcashLightClientKit uses a rust library called Librustzcash. In order to build it, you need to have rust and cargo installed on your environment.
Install Rust, and then cargo-lipo:
$ cargo install cargo-lipo
$ rustup target add aarch64-apple-ios x86_64-apple-ios
use_frameworks!
pod 'ZcashLightClientKit', :path => '../../', :testspecs => ['Tests'] # include testspecs if you want to run the testsuse_frameworks!
pod 'ZcashLightClientKit'Before building, make sure that your enviroment has the variable ZCASH_NETWORK_ENVIRONMENT set to MAINNET or TESTNET.
When running pod install you will see this warning upon sucess:
[!] ZcashLightClientKit has added 2 script phases. Please inspect before executing a build.
See `https://guides.cocoapods.org/syntax/podspec.html#script_phases` for more information.Integrating Rust code with Swift code and delivering it in a consistent and (build) reproducible way, is hard. We've taken the lead to get that burden off your shoulders as much as possible by leveraging the prepare_command and script_phases features from Cocoapods to carefully generate the TESTNET and MAINNET builds as simple and less error prone as we could think it could be. Which started as some simple vanilla scripts, ended up being some kind of "Build System" on its own. Nothing is written on stone, and we accept collaborations and improvements in this matter too.
This section explains the 'Build System' that integrates the rust code and creates the corresponding environment
There are some basic steps to build ZcashLightClientKit. Even though they are 'basic' they can be cumbersome. So we automated them in scripts.
1. Pod install and prepare_command
ZcashLightClientKit needs files to be present at pod installation time, but that can't be defined properly yet and depend on librustzcash building properly and for an environment to be set up at build time. For know we just need to let Cocoapods that these files exist:
${ZCASH_POD_SRCROOT}/zcashlc/libzcashlc.athis is the librustzcash build .a file itselflib/libzcashlc.a(as vendored library that will be added as an asset by xcodeproj)ZcashSDK.generated.swiftwhich contains sensitive values for the SDK that change depending on the network environment we are building forWalletBirthday+saplingtree.generated.swifthelper functions to import existing wallets.
2. Build Phase
The build Phase scripts executes withing the Xcode Build Step and has all the known variables of a traditional build at hand.
s.script_phase = {
:name => 'Build generate constants and build librustzcash',
:script => 'sh ${PODS_TARGET_SRCROOT}/Scripts/generate_zcashsdk_constants.sh && sh ${PODS_TARGET_SRCROOT}/Scripts/build_librustzcash_xcode.sh',
:execution_position => :before_compile
}This step will generate files needed on the next steps and build the librustzcash with Xcode but not using cargo's built-in xcode integration
a. Generating ZcashSDK constants
To run this you need Sourcery. We use Stencil templates to create this files based on the ZCASH_NETWORK_ENVIRONMENT value of your choice. You can either integrate sourcery with cocoapods or as part of your environment.
All generated files will be located in the Pods source root within the Generated folder. ZCASH_SDK_GENERATED_SOURCES_FOLDER represents that path in the build system
b. Building librust zcash and integrating it to the pod structure.
Where the magic happens. Here we will make sure that everything is set up properly to start building librustzcash. When on mainnet, the build will append a parameter to include mainnet features.
Safeguards points: if it appears that you are about to build something smelly, we will let you know. Combining testnet and mainnet values and artifacts and viceversa leads to unstable builds and may cause lost of funds if ran on production.
if [ existing_build_mismatch = true ]; then
# clean
echo "build mismatch. You previously build a Different network environment. It appears that your build could be inconsistent if proceeding. Please clean your Pods/ folder and clean your build before running your next build."
exit 1
fi
3. Xcode clean integration
When performing a clean, we will clean the rust build folders.
On the Scripts folder you will find the following files:
| Scripts
|-/prepare_zcash_sdk.sh
|-/generate_test_constants.sh
|-/build_librustzcash_xcode.sh
|-/build_librustzcash.sh
|-/generate_zcashsdk_constants.sh
|-/script_commons.sh
This script is run by the Cocoapods 'preapare_command'.
s.prepare_command = <<-CMD
sh Scripts/prepare_zcash_sdk.sh
CMDIt basically creates empty files that cocoapods needs to pick up on it's pod structure but that are still not present in the file system and that will be generated in later build phases.
NOTE: pod install will only run this phase when no Pods/ folder is present or if your pod hash has changed or is not present on manifest.lock. When in doubt, just clean the Pods/ folder and start over. That usually gets rid of weirdness caused by Xcode caching a lot of stuff you are not aware of.
A lot of important environment variables and helper functions live in the script_commons.sh.
Currently tests depend on a lightwalletd server instance runnning locally or remotely to pass.
To know more about running lightwalletd, refer to its repo https://github.com/zcash/lightwalletd
Tests use Sourcery to generate a Constants file which injects the lightwalletd server address to the test themselves
refer to the official repo https://github.com/krzysztofzablocki/Sourcery
create a file called env-var.sh on the project root to create the LIGHTWALLETD_ADDRESS environment variable on build time.
export LIGHTWALLETD_ADDRESS="localhost%3a9067"
The LIGHTWALLETD_ADDRESS environment variable can also be added to your shell of choice and xcodebuild will pick it up accordingly.
We advice setting this value as a secret variable on your CD/CI environment when possible
We don't like reinveing the wheel, so be gently borrowed swift lint rules from AirBnB which we find pretty cool and reasonable.
if you see this message when building:
No network environment. Set ZCASH_NETWORK_ENVIRONMENT to MAINNET or TESTNET
make sure your dev environment is has this variable set before the build starts. DO NOT CHANGE IT DURING THE BUILD PROCESS.
if you get a build error similar to _function_name referenced from...
- on your project root directory *
- remove the 'Pods' directory
rm -rf Pods/ - delete derived data and clean
- run
pod install - build
This project follows semantic versioning with pre-release versions. An example of a valid version number is 1.0.4-alpha11 denoting the 11th iteration of the alpha pre-release of version 1.0.4. Stable releases, such as 1.0.4 will not contain any pre-release identifiers. Pre-releases include the following, in order of stability: alpha, beta, rc. Version codes offer a numeric representation of the build name that always increases. The first six significant digits represent the major, minor and patch number (two digits each) and the last 3 significant digits represent the pre-release identifier. The first digit of the identifier signals the build type. Lastly, each new build has a higher version code than all previous builds. The following table breaks this down:
| Type | Purpose | Stability | Audience | Identifier | Example Version |
|---|---|---|---|---|---|
| alpha | Sandbox. For developers to verify behavior and try features. Things seen here might never go to production. Most bugs here can be ignored. | Unstable: Expect bugs | Internal developers | 0XX | 1.2.3-alpha04 (10203004) |
| beta | Hand-off. For developers to present finished features. Bugs found here should be reported and immediately addressed, if they relate to recent changes. | Unstable: Report bugs | Internal stakeholders | 2XX | 1.2.3-beta04 (10203204) |
| release candidate | Hardening. Final testing for an app release that we believe is ready to go live. The focus here is regression testing to ensure that new changes have not introduced instability in areas that were previously working. | Stable: Hunt for bugs | External testers | 4XX | 1.2.3-rc04 (10203404) |
| production | Dellivery. Deliver new features to end users. Any bugs found here need to be prioritized. Some will require immediate attention but most can be worked into a future release. | Stable: Prioritize bugs | Public | 8XX | 1.2.3 (10203800) |
This repo contains demos of isolated functionality that this SDK provides. They can be found in the examples folder
Examples can be found in the Demo App
Apache License Version 2.0