Bot Updating Templated Files

README.md

@@ -71,7 +71,8 @@ This image provides various versions that are available via tags. Please read th
 To use this image you need an existing DHCP server where you can set this TFTP server as your DHCP boot destination. This image does not contain a DHCP server nor do we aim to support one in the future. This is simply a TFTP server hosting the latest IPXE kernel builds from [netboot.xyz](https://netboot.xyz). If you are interested in their project and lack the ability to setup a DHCP server to boot this payload they also have USB stick images you can use available on their [downloads page](https://netboot.xyz/downloads/).
 ### Router Setup Examples
 #### PFSense Services -> DHCP Server
-Set both the option for "TFTP Server" and the options under the Advanced "Network Booting" section. * check enable * Next server- IP used for TFTP Server * Default BIOS file name- `netboot.xyz.kpxe` * UEFI 32 bit file name- `netboot.xyz.efi` * UEFI 64 bit file name- `netboot.xyz.efi`
+Set both the option for "TFTP Server" and the options under the Advanced "Network Booting" section.
+ * check enable * Next server- IP used for TFTP Server * Default BIOS file name- `netboot.xyz.kpxe` * UEFI 32 bit file name- `netboot.xyz.efi` * UEFI 64 bit file name- `netboot.xyz.efi`
 #### OPNsense Services -> DHCP Server
 Under the Advanced "Network Booting" section. * check enable * Next server- IP of docker host * Default BIOS file name- `netboot.xyz.kpxe` * UEFI 32 bit file name- `netboot.xyz.efi` * UEFI 64 bit file name- `netboot.xyz.efi`
 #### Unifi Security Gateway (with the controller) Networks -> LAN (or the network you want to boot from) -> ADVANCED DHCP OPTIONS * tick Enable network boot * Server- YOURSERVERIP * Filename- `netboot.xyz.kpxe` Advanced full support * For USG variants force provisioning a json containing the same config used for EdgeOS (shown below) will fully support netboot. * For UDM variants, creating a valid dnsmasq config and placing in /run/dnsmasq.conf.d will load the config, but will not survive reboots or firmware updates [source](https://community.ui.com/questions/PXE-Network-boot-UDM-SE-Serving-files-conditionally-based-on-architecture/1843fcf6-87d5-4305-bc1d-4e55619ebb10).