Skip to content

Sonata system v0.1
Compare
Choose a tag to compare
@marnovandermaas marnovandermaas released this 23 May 10:23
· 534 commits to main since this release
v0.1
21f4c1a

This is a pre-release bitstream that contains the basic infrastructure for a CHERIoT SoC:

  • A GPIO for LED output and user input.
  • 256 KiB of SRAM for both data and instructions.
  • Revocation tags that cover all of SRAM.
  • A TL-UL bus extended with capability tags in the user field.
  • 2 UARTs.
  • 2 I2C hosts.
  • 3 SPI blocks: one for LCD, one for Flash and one for ethernet.
  • USB device for using the user USB.
  • Timer for generating interrupts.

You can download the generated bitstream below named sonata_bitstream_v0.1.bit. This generated bitstream contains a bootloader that will load a software image from flash.

Besides the bitstream, you'll also need a UF2 to program the RP2040, which is named rpi_rp2_v0.1.uf2. Future releases may be found in the sonata-rp2040 repository.

You will also need a UF2 of the software that you want to execute. You can create your own using our template repository. For testing I've also attached an example to this release named sonata_simple_demo_v0.1.uf2 to this release.

A quick start guide:

  • Before plugging in your Sonata board, hold down the SW9 labelled "RP2040 Boot", and while holding this button plug your board into your laptop using the Main USB.
  • A drive called RPI-RP2 should pop up on your computer and drag rpi_rp2_v0.1.uf2 into it.
  • This drive should automatically dismount once the file is transfered and remount as SONATA. Once the remount has happened, you can drag in the bitstream sonata_bistream_v0.1.bit. You may have to unplug and replug the USB cable if the drive does not mount automatically.
  • Once programming is successful, you should see the CHERI LED light up and the LEGACY LED turn off. If this is not the case, the bitstream loading may have failed and you should retry by unplugging and replugging the main USB on the Sonata board and redrag the bitstream into the SONATA drive.
  • After programming the bitstream, drag the sonata_simple_demo_v0.1.uf2 into the SONATA drive.
  • You should now see the user LEDs turn on and off.

For more information please refer to the documentation.

Assets 5
Loading