Tip
If you have any problem with the clock, displays or the casing, find the solution here.
Important
The clock requires a good quality external 12V (minimum 1.5A) power supply, 5.5mm diameter plug, 2.1mm center pin positive +.
- 01-Basic-Test
- 02-Word-Display
- 03-Thermometer-Celsius
- 04-Thermometer-Celsius-Humidity
- 05-Thermometer-Fahrenheit
- 06-Thermometer-Fahrenheit-Humidity
- 07-Classic-Clock-24-Hour
- 08-Classic-Clock-24-Hour-Flip-Speed
- 09-Classic-Clock-12-Hour
- 10-Classic-Clock-12-Hour-Flip-Speed
- 11-Classic-Clock-24-Hour-Thermometer-Celsius-Humidity - to do
- 12-Classic-Clock-24-Hour-Thermometer-Fahrenheit-Humidity - to do
- 13-Classic-Clock-12-Hour-Thermometer-Celsius-Humidity - to do
- 14-Classic-Clock-12-Hour-Thermometer-Fahrenheit-Humidity - to do
- Basic Setup
- Assembly Instructions - YouTube
- Assembly Instructions - pdf
- Optional Wall Instalation
- Time Settings Instructions
- Flip Disc Speed/Delay Settings Instructions - only for code that supports these settings
- Clock Diagram
- Dedicated Controller
- 7-Segment Flip-disc Display
- 3x1 Flip-disc Display
- Arduino Nano Every
- RTC Real Time Clock RX8025T
- Temperature Sensor DHT22