-
Notifications
You must be signed in to change notification settings - Fork 3
pdinfo
遇见王斌 edited this page Oct 29, 2017
·
8 revisions
以下输出的是单块硬盘的信息
/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL -nolog
#/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL -nolog
Enclosure Device ID: 252 <<<<背板 ID
Slot Number: 5 <<<<槽位 ID
Drive's position: DiskGroup: 0, Span: 0, Arm: 4 <<<对应逻辑磁盘 ID
Enclosure position: N/A
Device Id: 13
WWN: 50000397cb7029d0
Sequence Number: 2
Media Error Count: 0 <<<<大于 0 时表示磁盘可能错误,可能是磁盘有坏道
Other Error Count: 0 <<<<大于 0 时表示磁盘可能存在松动,可能需要重新再插入
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 512
Logical Sector Size: 512
Physical Sector Size: 512
Firmware state: Online, Spun Up <<<<在线
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: FJ2D
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221105000000
Connected Port Number: 5(path0)
Inquiry Data: 57D1K63RFVMCTOSHIBA MG04ACA200N FJ2D
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Certified
Drive Temperature :28C (82.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Drive's NCQ setting : Enabled
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
- 一般情况是进入逻辑磁盘管理界面,在指定的逻辑磁盘组在弹出菜单里选择
Mange Ded. HS
Enclosure Device ID: 252 <<<<背板 ID
Slot Number: 6 <<<<槽位 ID
Enclosure position: N/A
Device Id: 14
WWN: 50000397cb7029d1
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Hotspare Information:
Type: Dedicated, with enclosure affinity, is revertible
Array #: 0 <<<<给逻辑磁盘 0 作热备盘
Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 512
Logical Sector Size: 512
Physical Sector Size: 512
Firmware state: Hotspare, Spun down
Device Firmware Level: FJ2D
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221106000000
Connected Port Number: 6(path0)
Inquiry Data: 57D1K63SFVMCTOSHIBA MG04ACA200N FJ2D
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Certified
Drive Temperature :30C (86.00 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Drive's NCQ setting : Enabled
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
- 一般情况是进入物理磁盘界面将
ready
状态的硬盘Make Global HS
即创建全局热备盘
Enclosure Device ID: 252 <<<<背板 ID
Slot Number: 7 <<<<槽位 ID
Enclosure position: N/A
Device Id: 15
WWN: 50000397cbf01d7d
Sequence Number: 2
Media Error Count: 0 <<<<大于 0 时表示磁盘可能错误,可能是磁盘有坏道
Other Error Count: 0 <<<<大于 0 时表示磁盘可能存在松动,可能需要重新再插入
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Hotspare Information:
Type: Global, is revertible <<<< 全局热备盘
Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Sector Size: 512
Logical Sector Size: 512
Physical Sector Size: 512
Firmware state: Hotspare, Spun down
Device Firmware Level: FJ2D
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221107000000
Connected Port Number: 7(path0)
Inquiry Data: 57CHK4TDFVMCTOSHIBA MG04ACA200N FJ2D
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Certified
Drive Temperature :31C (87.80 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Drive's NCQ setting : Enabled
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
- 制作 raid 组的盘会输出
Drive's position: DiskGroup: 0, Span: 0, Arm: 4
项,而热备盘没有此项 - 热备盘会输出 Hotspare 的相关信息,做 raid 组的盘则不会