ratiscat

rat is a performant re-implementation of cat in rust

Turns out a rat fits in a pipe better than a cat anyways.

See rat.rs

Also checkout the uutils project:

https://github.com/uutils/coreutils/

Usage

As run on and compared to: i7-6800K / 128GB DDR4 (file reads cached) / Linux 6.3.9 / btrfs (CoW) / coreutils 9.3 / uutils 0.0.20

Basic functionality (raw I/O)

# 4GB random data sample
$ dd if=/dev/urandom of=test.rand bs=1MB count=4096

# file to file

$ time rat test.rand >test.$(date +%s)
real    0m1.715s # <-- io::copy uses sendfile() first then copy_file_range() :(
user    0m0.001s
sys     0m1.710s
$ time cat test.rand >test.$(date +%s)
real    0m0.004s # <-- cat uses copy_file_range() all the time, great for btrfs
user    0m0.004s
sys     0m0.000s

# file to pipe

$ rat test.rand | pv -r >/dev/null
[2.69GiB/s] # <-- rat automagically configures size for FIFO pipes
$ cat test.rand | pv -r >/dev/null
[2.02GiB/s] # <-- cat does 128K writes onto default 64K sized FIFO pipe (???)

# from char devices

$ timeout 5 rat </dev/zero | pv -ab >/dev/null
25.2GiB [5.05GiB/s]
$ timeout 5 cat </dev/zero | pv -ab >/dev/null
16.0GiB [4.00GiB/s]

# between pipes

$ timeout -s SIGINT 5 yes | rat | pv -r >/dev/null
[4.68GiB/s]
$ timeout -s SIGINT 5 yes | cat | pv -r >/dev/null
[2.80GiB/s]

Argument ordering, error logging, sanity checks

$ echo test | rat - /does/not/exists /etc/hosts /does/not/exists2 | md5sum
rat: /does/not/exists: No such file or directory
rat: /does/not/exists2: No such file or directory
27f2e6689a97a42813e55d44ef29cda4  -
$ rat < foo >> foo
rat: -: input file is output file

$ echo test | cat - /does/not/exists /etc/hosts /does/not/exists2 | md5sum
cat: /does/not/exists: No such file or directory
cat: /does/not/exists2: No such file or directory
27f2e6689a97a42813e55d44ef29cda4  -
$ cat < foo >> foo
cat: -: input file is output file

Some comparisons with pv and uu-cat

$ timeout 5 pv -r </dev/zero >/dev/null
[20.3GiB/s]
$ timeout 5 yes | pv -r >/dev/null
[6.13GiB/s]
$ timeout 5 pv -r </dev/zero | pv -q >/dev/null
[3.39GiB/s]
$ timeout 5 pv -r </dev/zero | uu-cat >/dev/null
[3.66GiB/s]
$ timeout 5 pv -r </dev/zero | rat >/dev/null
[3.26GiB/s]
$ timeout 5 pv -r </dev/zero | pv -q --no-splice >/dev/null
[2.70GiB/s]
$ timeout 5 pv -r </dev/zero | cat >/dev/null
[2.66GiB/s]

Increases throughput by configuring pipe sizes

$ timeout 5 cat </dev/zero | pv -abC >/dev/null
10.8GiB [2.71GiB/s]
$ timeout 5 cat </dev/zero | rat | pv -abC >/dev/null # without splice
17.7GiB [3.54GiB/s]
$ timeout 5 cat </dev/zero | rat | pv -ab >/dev/null  # with splice
19.4GiB [3.88GiB/s]

Splice it up!

$ timeout 5 rat </dev/zero | rat | rat | rat | pv -r >/dev/null
[4.78GiB/s]

$ timeout 5 rat </dev/zero | cat | cat | cat | pv -r >/dev/null
[2.16GiB/s]

Motivation

I just wanted to do this as a learning experience for rust.

At least, that's how it started.

I intend to make rat nearly the same as cat (uutils already did all this) but with additional niceties built in, maybe such as:

• Prefixing lines with timestamps in any arbitrary strftime format
• Strict mode - pre-emptively detect errors ie. missing files / permissions before providing possibly mangled output
• Human readable, colorized output of any generic text stream based on patterns (ie. red errors, blue debugs, etc)

Thoughts / Notes

• Stdout in rust will always be wrapped by LineWriter which flushes the buffer on new lines. This seems fine for interactive stdin.

  For other I/O use the wrapped BufWriter<File> on the file descriptor for more flow control otherwise you get a ton of unnescessary small writes.

• Pre-allocation given a Sized Vec<u8> for the buffer handles has some interesting impacts on runtime performance

  Even when that vector is immediately cleared on runtime the behavior between initially empty vs. initially padded (Sized?) vector is noticeable. read() calls seem to ramp up by pow2 starting at 8192 until it reaches the specified buffer size, instead of just passing the fixed amount of data.

  Alternatively Vec.with_capacity works too and apparently doesn't need to be cleared, so one less line of code.

• splice(2) can show some insane performance improvements over traditional read()/write() calls

  However, these benefits are only fully realized under specifics conditions (ie. </dev/zero >/dev/null) which don't apply to writes on regular files. There is still an improvement over traditional syscalls. Probably excellent for network sockets...

• Linux pipes are limited to 64K buffers by default. They can be increased up to the sysctl fs.pipe-max-size setting (1MB by default).

  You can tweak pipes using fcntl() - see pipe(7) - Pipe Capacity and fcntl(2) - Changing the capacity of a pipe.

• GNU cat has odd behavior when writing to pipes, it clearly attempts to write its default 128K buffer size which subsequently reduces the performance.

  Only happens when on the left-side of the pipe (writing), reading pipes will fill and flush the 64K buffer immediately as expected. In between pipes (ie. echo | cat | grep -) will perform 64K read and write.

  rat easily acheives ~500MB-1GBps+ more throughput here by using the proper pipe buffer size (see above)

• rust io::copy currently insists on using sendfile() first and then using copy_file_range() on subsequent calls during the same runtime (ie. when given multiple parameters), also the copy_file_range() length is way lower than cat for example (1073741824 vs 9223372035781033984)

  Reported and fixed: rust-lang/rust#114341

• How can copy_file_range() concatenate a file multiple times (ie. each syscall is appending to the file) and yet doesn't work (EBADF) when appending from shell?

Upstream bug fixes

• rust-lang/rust#114373

Known Bugs

See TODO in rat.rs