Add support for KeeLoq HCS362

README.md

@@ -356,6 +356,8 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
     [268]  Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
     [269]  DeltaDore X3D devices
     [270]* Quinetic
+    [271]  Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 0)
+    [272]  Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 1)
 
 * Disabled by default, use -R n or a conf file to enable
 

conf/rtl_433.example.conf

@@ -496,7 +496,9 @@ convert si
   protocol 267 # ThermoPro Meat Thermometers, TP828B 2 probes with Temp, BBQ Target LO and HI
   protocol 268 # Bresser Thermo-/Hygro-Sensor Explore Scientific ST1005H
   protocol 269 # DeltaDore X3D devices
-# protocol 268 # Quinetic
+# protocol 270 # Quinetic
+  protocol 271 # Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 0)
+  protocol 272 # Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 1)
 
 ## Flex devices (command line option "-X")
 

include/rtl_433_devices.h

@@ -278,6 +278,8 @@
     DECL(bresser_st1005h) \
     DECL(deltadore_x3d) \
     DECL(quinetic) \
+    DECL(hcs362_pwm) \
+    DECL(hcs362_mc) \
 
     /* Add new decoders here. */
 

src/CMakeLists.txt

@@ -138,6 +138,7 @@ add_library(r_433 STATIC
     devices/gt_wt_02.c
     devices/gt_wt_03.c
     devices/hcs200.c
+    devices/hcs362.c
     devices/hideki.c
     devices/holman_ws5029.c
     devices/hondaremote.c

src/devices/hcs362.c

@@ -0,0 +1,132 @@
+/** @file
+    Microchip HCS362 KeeLoq Code Hopping Encoder based remotes.
+
+    Copyright (C) 2024 Christian W. Zuckschwerdt <zany@triq.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+*/
+
+#include "decoder.h"
+
+/**
+Microchip HCS362 KeeLoq Code Hopping Encoder based remotes.
+
+There are two transmissions modes: PWM (mode 0) and MC (mode 1).
+
+72 bits transmitted, LSB first.
+
+69-bit transmission code length
+- 32-bit hopping code
+- 37-bit fixed code (28/32-bit serial number, 4/0-bit function code, 1-bit status, 2-bit CRC/time, 2-bit queue)
+- Stop bit
+
+|  0-31 | 32 bit Encrypted Portion
+| 32-59 | 28 bit Serial Number
+| 60-63 | 4 bit Function Code (S3, S0, S1, S2)
+| 64    | 1 bit Battery Low (Low Voltage Detector Status)
+| 65-66 | 2 bit CRC
+| 67-68 | 2 bit Button Queue Information
+
+Note that the button bits are (MSB/first sent to LSB) S3, S0, S1, S2.
+Hardware buttons might map to combinations of these bits.
+
+- Datasheet HCS362: https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/40189E.pdf
+
+The preamble of 12 short pulses is followed by a long 850 us gap.
+
+Raw data capture:
+
+    rtl_433 -R 0 -X 'n=HCS362,m=OOK_PCM,s=214,l=214,g=600,r=900'
+*/
+
+static int hcs362_decode(r_device *decoder, bitbuffer_t *bitbuffer)
+{
+    // Reject codes of wrong length
+    if (bitbuffer->bits_per_row[0] != 12 || bitbuffer->bits_per_row[1] != 72)
+        return DECODE_ABORT_LENGTH;
+
+    uint8_t *b = bitbuffer->bb[0];
+    // Reject codes with an incorrect preamble (expected 0xfff)
+    // Manchester decoding might read this as 0x000
+    if ((b[0] != 0xff || (b[1] & 0xf0) != 0xf0) && (b[0] != 0x00 || (b[1] & 0xf0) != 0x00)) {
+        decoder_log(decoder, 2, __func__, "Preamble not found");
+        return DECODE_ABORT_EARLY;
+    }
+
+    // Second row is data
+    b = bitbuffer->bb[1];
+
+    // No need to decode/extract values for simple test
+    if (b[1] == 0xff && b[2] == 0xff && b[3] == 0xff && b[4] == 0xff
+            && b[5] == 0xff && b[6] == 0xff && b[7] == 0xff) {
+        decoder_log(decoder, 2, __func__, "DECODE_FAIL_SANITY data all 0xff");
+        return DECODE_FAIL_SANITY;
+    }
+
+    // The transmission is LSB first, big endian.
+    uint32_t encrypted = ((unsigned)reverse8(b[3]) << 24) | (reverse8(b[2]) << 16) | (reverse8(b[1]) << 8) | (reverse8(b[0]));
+    int serial         = (reverse8(b[7] & 0xf0) << 24) | (reverse8(b[6]) << 16) | (reverse8(b[5]) << 8) | (reverse8(b[4]));
+    int btn            = (b[7] & 0x0f);
+    int btn_num        = (btn & 0x08) | ((btn & 0x01) << 2) | (btn & 0x02) | ((btn & 0x04) >> 2); // S3, S0, S1, S2
+    int learn          = (b[7] & 0x0f) == 0x0f;
+    int battery_low    = (b[8] & 0x80) == 0x80;
+    int repeat         = (b[8] & 0x40) == 0x40;
+
+    char encrypted_str[9];
+    snprintf(encrypted_str, sizeof(encrypted_str), "%08X", encrypted);
+    char serial_str[9];
+    snprintf(serial_str, sizeof(serial_str), "%07X", serial);
+
+    /* clang-format off */
+    data_t *data = data_make(
+            "model",            "",             DATA_STRING,    "Microchip-HCS362",
+            "id",               "",             DATA_STRING,    serial_str,
+            "battery_ok",       "Battery",      DATA_INT,       !battery_low,
+            "button",           "Button",       DATA_INT,       btn_num,
+            "learn",            "Learn mode",   DATA_INT,       learn,
+            "repeat",           "Repeat",       DATA_INT,       repeat,
+            "encrypted",        "",             DATA_STRING,    encrypted_str,
+            NULL);
+    /* clang-format on */
+
+    decoder_output_data(decoder, data);
+    return 1;
+}
+
+static char const *const output_fields[] = {
+        "model",
+        "id",
+        "battery_ok",
+        "button",
+        "learn",
+        "repeat",
+        "encrypted",
+        NULL,
+};
+
+r_device const hcs362_pwm = {
+        .name        = "Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 0)",
+        .modulation  = OOK_PULSE_PWM,
+        .short_width = 214,
+        .long_width  = 430,
+        .gap_limit   = 600,
+        .reset_limit = 900,
+        .tolerance   = 50, // us
+        .decode_fn   = &hcs362_decode,
+        .fields      = output_fields,
+};
+
+r_device const hcs362_mc = {
+        .name        = "Microchip HCS362 KeeLoq Hopping Encoder based remotes (mode 1)",
+        .modulation  = OOK_PULSE_MANCHESTER_ZEROBIT,
+        .short_width = 214,
+        .long_width  = 214,
+        .gap_limit   = 600,
+        .reset_limit = 900,
+        .tolerance   = 50, // us
+        .decode_fn   = &hcs362_decode,
+        .fields      = output_fields,
+};