openwrt-builder

This project contains all necessary files to build a custom OpenWRT image for Raspberry Pi model 4 or CM4 with the following additions to the oficial image:

• has all dependencies for Ansible support;
• supports RPi CM4 DFRobot Carrier Board Mini.

The latest Raspberry Pi 4 compatible image can be downloaded from the official OpenWRT website from the target bcm2711

How it works

Custom OpenWRT images can be created with the official bcm2711 image builder. This image builder is stored in the same folder with the original build openwrt-imagebuilder-bcm27xx-bcm2711.Linux-x86_64.tar.xz. The builder requires Linux-based operating system running on x86_64 CPU.

Vagrant prepares a virtual Debian host using Ansible playbook for building a new image. It uses VirtualBox as a provider for virtual hosts. The build.sh script downloads all necessary files on the virtual host, runs all build steps and returns the final build to the workstation.

If your workstation is a linux host, you don't need a virtual machine and can execute scripts/build.sh directly from the repo's root folder.

Hardware RPi-4 setup

                                        |
                                  ______| lan = 1Gb/s
                                 /      |___________________
                   --eth0 ------/         PoE IEEE 802.3af/at SWITCH
RPi4(w/ PoE hat)--|                     ____________________
                   --eth1-usb3 -\       |
                                 \_____ | wan = 1Gb/s       [------ CABLE/FIBRE
                                        |___________________
                                          ISP MODEM

OSX Steps

Install all dependencies before moving forward

• Vagrant brew install vagrant
• Ansible brew install ansible
• VirtualBox can be downloaded from https://www.virtualbox.org
  • Note: ARM64(aka Apple CPU) hosts are not supported at the moment

Clone the builder repo:

git clone https://github.com/mkoshtenko/openwrt-builder.git
cd openwrt-builder

Setup the infrastructure:

vagrant up

Create build:

vagrant ssh -c './scripts/build.sh'

Clean up:

vagrant destroy

The image file should be in ./builds directory, e.g. ./builds/openwrt-rpi-4.img.gz

Troubleshooting

Run Ansible playbook w/o destroying the deployment:

vagrant provision