manysecured-openwrt-packages

📦 OpenWRT package feed for manysecured

Usage

Toolchain

Download the OpenWRT SDK toolchain from https://downloads.openwrt.org/releases for your hardware architecture and OpenWRt release.

Configure and Build

Add the following line to the feeds.conf or feeds.conf.default files in the OpenWRT SDK toolchain folder:

src-git manysecured https://github.com/nqminds/manysecured-openwrt-packages.git

Run the following to download the OpenWRT package definitions, enable them for compilation, and compile them.

# pulls data from the feeds to the local PC
./scripts/feeds update -a
# deletes any old contents manysecured contents
rm ./package/feeds/packages/manysecured
rm ./package/feeds/packages/manysecured-*
# enables compiling manysecured contents
./scripts/feeds install -a -p manysecured
make defconfig
# required unless you disable signed packages in OpenWRT (or build base-files)
./staging_dir/host/bin/usign -G -s ./key-build -p ./key-build.pub -c "Local build key"
make
# use `make V=scw` for debugging
# use `nice -n19 make -j15` to make with 15 threads with low CPU priority (recommended)

If all goes well, the packages should be found in bin/packages/*/manysecured (replacing * with your architecture/target)! For example, the edgesec package may be located at bin/packages/arm_cortex-a9_vfpv3-d16/manysecured/edgesec_0.0.8-1_arm_cortex-a9_vfpv3-d16.ipk, and can be installed via opkg install ./edgesec_0.0.8-1_arm_cortex-a9_vfpv3-d16.ipk